Expensive Trash

Пікірлер

@Nakedbouz 8 күн бұрын

最初のCLASSICの方がシースが好み

@vicpetrishak7705 27 күн бұрын

Using corn oil , olive oil , or vegetable oil will service the blade without contaminating food .

@kenobiworks 2 ай бұрын

How about solder with a soldering iron. You could seal the gap that way too no?

@TheWildCusli 2 ай бұрын

True, a very good permenant fix 👌👏

@JPazer Ай бұрын

Nice idea. But isn't solder too weak for it to be permanent? I assume it would break off after some use. Welding would be better I guess but then that means much more effort/cost.

@TheWildCusli Ай бұрын

@@JPazer welding would change the temper of the blade.

@JPazer Ай бұрын

@@TheWildCusli didnt think of that

@FerndaleMichiganUSA 2 ай бұрын

I melted pine pitch into that gap and it's done pretty well. I mean, the gap is sealed to the edge of the ferrule. Waterproof...

@alexgloba9.90 3 ай бұрын

Коту огромный привет передавай 😅😂

@georgeb.wolffsohn30 5 ай бұрын

Although I've cut the point off ghe bottom of my mora sheath tit also has two holes in the sback side . Ive noticed there are no drainage holes in your sheaths .

@TheWildCusli 5 ай бұрын

There is actually a small drainage hole in the bottom. Never had any issued with it :)

@robertbrunston5406 7 ай бұрын

Cool video, good info. Thank you for sharing.

@TheWildCusli 7 ай бұрын

Thanks for the comment :)

@franktechmaniac7488 7 ай бұрын

Everybody who wants to purchase a Mora One Original needs to hurry up. It seems that Morakniv already stopped making them.

@TheWildCusli 7 ай бұрын

😱

@franktechmaniac7488 7 ай бұрын

@@TheWildCusli A few years back I paid 35-40 €, don't recall the exact numbers. Being currently unavailable my retailer asks 86 € right now.

@TheWildCusli 7 ай бұрын

@@franktechmaniac7488 I beleive that I paid around the same amount as you back then... but if they stopped the production, it makes sense that the prices will go up. On the bright side, theese knives will become even more special. :)

@CundaliniWantsHisHandBack 9 ай бұрын

Thanks for Sharing. We all need to spend some time outdoors.

@CundaliniWantsHisHandBack 9 ай бұрын

Yeah, the Mora Sheaths are cheap junk. Replace it with a real Sheath if you're so inclined .

@harrymason1053 9 ай бұрын

The plastic sheath will actually fill up with water if you are using it in the rain or snow. Then the next time you go to use it, it will have become rusted. If your lucky, you notice this before it ruins the finish. I didn't. I would like to make a leather one. Add that to the too many projects I have, by a factor of 10. I cut the tip, for an expedient solution, and provide a drain.

@petertuckergoettler5720 10 ай бұрын

Have One, My Favorite, merci. That's "Mora" Knife I Use For Everything; Cutting, Carving, Butchering And Camping, merci.

@TheWildCusli 10 ай бұрын

Love her name !! Super, keep it up :)

@papayaman78 10 ай бұрын

Put jb weld in the tiny cracks between the blade

@Christopherjamesmurphy21 10 ай бұрын

Clean it up and put some 2 part epoxy on the holes that concern you to seal them off.

@MrMisaKulicka 11 ай бұрын

Nice find. Definitely Hults Bruks, pre-1988 (cold stamp), and original handle. That epoxy stuff was used by most of the bigger Scandinavian makers from the 60-80's, HB called it "AGDORFIX", and its horrible stuff to work with! Unusul pattern, looks a bit like a Vira. You can submit photos of vintage HBs to the company and they will usually get back to you with an age estimate and pattern name.

@TheWildCusli 11 ай бұрын

Your feedback made me like the axe even more, thanks for the information :)

@davidnolan2115 Жыл бұрын

You can use wax to prevent rust as well as oil. Plus you can fill that gap and keep moisture out

@ronniepirtlejr2606 Жыл бұрын

You can clean it out the best that you can. Then place a couple of drops of epoxy or shoe glue in it & let it cure. That should keep all crud out of the knives.

@ilijabosnjak76 Жыл бұрын

My Mora Companion has never let me down, I would like N01 or 2 but I am happy with just basic

@adrianjagmag Жыл бұрын

Seal that gap with epoxy or CA glue. I did.

@Flockingtheherd Жыл бұрын

Where did you get those sheaths? I have both those knives but they came with crappy sheaths that I hate. Really want one of those leather ones

@TheWildCusli Жыл бұрын

They came with the knives when I bought them... 🤷‍♂️ I'm not sure that you can buy them seperatly.

@heyarno Жыл бұрын

What oil do you use?

@TheWildCusli Жыл бұрын

I usually use Extra Virgin Olive Oil, because its food grade. (whatever brand)

@heyarno Жыл бұрын

@@TheWildCusli Thanks. I use WD-40 for mine(only the blades) and I wasn't satisfied. I'll give the olive oil a try. For handles, I'll stick to linseed oil, as it polymerises over time and gives good grip and weather protection.

@TheWildCusli Жыл бұрын

@@heyarnoI've used WD40 as well, and many other oils of that kind. (And still do if I dont have any other) I have also used Linseed oil on the hande, but I prefer something that I can use on both handle and blade. Thats why I usually use olive oil. (And it doesnt leave the knife "tacky") But in the end... I dont think it really maters that much, as long as the knife is well cared for. Thanks for the message, keep it up :)

@marksanders8028 Жыл бұрын

Great video. How did you make your belt loop on your oldest knife sheath?

@painkillergko Жыл бұрын

I have both. I recently bought them and I love them :)

@RickHawkDavison Жыл бұрын

Prefer my old military knife.

@RickHawkDavison Жыл бұрын

Blade is the same as the Morakniv

@pepejuan2924 Жыл бұрын

Fill the handle where to tang enters with 888 glue, it’s very thin and super strong, it will penetrate deeply and seal it and strengthen it, great looking knife 👍😁💪🏻

@TheWildCusli Жыл бұрын

Thanks for the tip ;)

@davidnolan2115 Жыл бұрын

Problem with that is the wood will crack, having no room to contract/expand with humidity changes. Wax is a better solution

@paullambert4445 Жыл бұрын

Nice video. I love Moras. I have one traditional and four moderns

@TheUnknownReject Жыл бұрын

Lol, I can tell your classic is old cause mine has patinad the same way

@tor2919 Жыл бұрын

Mora classic is not a dangerous knife, it’s a usability is so much better than all the clumsy models with choils or guards or whatever gets in the way.

@tor2919 Жыл бұрын

The new classic 1 and 2 also have full rat tangs. The shiny sheaths refers to Mora heritage - they used to have shiny black sheaths

@vincentkipouette419 Жыл бұрын

Merci.

@TheWildCusli Жыл бұрын

Merci a vous

@greekveteran2715 Жыл бұрын

Please, what oil did you use? I sealed the gap on the base of the blade, with glue, or silicon glue, can't remember exactly, but I guess almost any glue would work! I did that the day I got it! Can you please tell me the oil you used? The oils I use, do not provide that beautiful tone yours got!!

@TheWildCusli Жыл бұрын

Hey :) I usually use Extra Virgin Olive Oil, (since its food grade). But I have the knife for a while, so I've actually used many diferent oils on it, such as linseed oil and WD40 😅. I have other knives (moras included) in which I apply the same oils but dont get the same results... because I always end up using my old trustworthy knife. so what i figured is that what actually gives the knife hande its color is just simply using it. Thanks for the message, keep it up :)

@greekveteran2715 Жыл бұрын

@@TheWildCusli Thanks for the feedback, I really appreciate it!!

@stonedape3285 Жыл бұрын

Hoaning scandi grind knifes aint reallu good

@Cheva-Pate Жыл бұрын

And now we are not aloud to wear a knife in Sweden anymore, there is a new knife-law 2023 and the cops love to get you a BIG ticket!

@TheWildCusli Жыл бұрын

😓

@FerndaleMichiganUSA Жыл бұрын

Love hearing the birds

@TheWildCusli Жыл бұрын

Nature is beautifull :)

@dementis1847 Жыл бұрын

…yo tengo cuchillos Mora como diez años…y lo uso día a día colgado al cuello…en el campo la ciudad…la funda es especial…

@TheWildCusli Жыл бұрын

Son muy buenos cuchillos. No uso el mío en la ciudad porque es ilegal donde vivo. Pero siempre que puedo los tengo en la cintura :)

@BCJerbs Жыл бұрын

That's a great find! How much it set you back?

@TheWildCusli Жыл бұрын

8 😀

@PorchHonkey Жыл бұрын

As soon as you found that pile of raisen-ettes ,I knew there'd be garbage somewhere nearby.

@TheWildCusli Жыл бұрын

Sad but true.

@hanikaram3351 Жыл бұрын

all the best man , i wish i seen more of the cat she looks awesome i love cats , you can seal the gap with either bees wax or lee valley tool has a special sealant with a needle for application it was made to seal all sorts of cracks between the wood and the eye of the axe

@enzoswoodshop1052 Жыл бұрын

Nice knives, I love that style for woodworking. My EDC is pretty similar. I carry an L.T. Wright Boattail.

@TheWildCusli Жыл бұрын

Thanks :) Boat tail is a great choice. Keep it up :)

@escapetherace1943 Жыл бұрын

I have so many moras but no classics.... going for the classic 1 (the small one though) the little 3 incher. Mainly because I already have a ton of 4 inch knives and want a carver. Definitely stripping the handle. It's made of birch wood, so I think birch oil is appropriate.. though I may start with the trusted linseed.

@escapetherace1943 Жыл бұрын

just shove some wax in that unsealed area, it'll never come out. or glue

@daveburklund2295 Жыл бұрын

Ever considered putting some kind of sealant to fill the gap between the bolster and the tang? Anyway, nice video with some thoughtful points.

@TheWildCusli Жыл бұрын

I beleive that at some point I put some sort of glue in there. Not the best quality because after some time it was gone. Nowadays I just squirt some oil in there and leave it be. I dont think that the gap is a huge deal, but its something to look out for. (Keep in mind, not every Mora will have a gap)

@daveburklund2295 Жыл бұрын

@@TheWildCusli Ah, very good. Well, I watched some of your other videos, and it seems you now have some backup Moras if this one ever fails. Seems like it's going strong, though! I enjoy your content! Regards!

@TheWildCusli Жыл бұрын

@@daveburklund2295 thanks for the message. Apreciate it :)

@mauricioruiz9021 Жыл бұрын

Great to see you again! Would you mind teaching that weave belt loop on that mora knife of yours

@TheWildCusli Жыл бұрын

ttps://kzfaq.info/get/bejne/qdB7gsuI2pjeYHU.html The video i sent you is a 3 strand. I beleive that I did a 4 strand for my Mora. Just add another string :)

@mauricioruiz9021 Жыл бұрын

@@TheWildCusli thank you so much! Say it, did you find that Hatchet in Brazil?

@TheWildCusli Жыл бұрын

@@mauricioruiz9021 🇨🇭😉

@enzod Жыл бұрын

Love Love Lova My classic original n,1.. I feel all that you an again

@oleksandrshumilov702 2 жыл бұрын

Друже, я з України! Дякую за чудовий огляд та порівняння!!! 👍

2 жыл бұрын

Belas facas!

@rylandsteff3440 2 жыл бұрын

The sheath on that newer one is the same as one my great grandpa gave me that he bought 30 years ago

@shadeshiest22 2 жыл бұрын

Where did you buy the leather sheath one?

@TheWildCusli 2 жыл бұрын

There are many places that you can buy them, but this one in bought through Amazon :)

@shadeshiest22 2 жыл бұрын

@@TheWildCusli I looked on Amazon yesterday when I made that comment and couldn’t find them, only the OG red handle versions… guess they sold out

@TheWildCusli 2 жыл бұрын

@@shadeshiest22, I tried to find it through Amazon but unfortunatly I couldnt either. Although if you search through Google, you can still find it for sale in other sites. I'm very pleased with mine, highly recomend it. Good luck knife shopping :)

@shadeshiest22 2 жыл бұрын

@@TheWildCusli know of any other sites that have or carry them? I looked but still couldn’t find any at the usual knife vendors….

@TheWildCusli 2 жыл бұрын

@@shadeshiest22 www.knivesandtools.com/en/pt/-mora-classic-original-1-exclusive-11934.htm

@jamesdavidson7604 2 жыл бұрын

Blade meets handle space issie we use beeswax after squiriting a little oil down into it.

Ең жақсы KZfaq

Пікірлер