@@MehmetYilmaz-e2l so I only inlay the inner part where it goes to the trunk on these bmw’s. You definitely don’t need to, I just like to inlay it for a longevity purpose but can easily 1 piece it as well! Really up to you and what install you’re comfortable with. The rest of the bumper doesn’t require any inlays though

@@danielnieto2701 hey! So I have 2 locations. One of Florida and one in New York! This one was priced differently as it had some add ons like a detail and ceramic coat added to it as well. These smaller Miata’s we do for $2k labor plus vinyl material cost and then any add ons the customer may request. Took me 3 days on this one plus the ceramic coat to be put on and cure for a day. so 4 days total before customer pick up

Thank you for the kind words!

labor fee will vary per car and color selection as each brand and color is priced differently. this car in particular is a easy one and it has a black base and as far as disassembly and install of panels it’s on the easy side. so labor fee on this bmw was $2,000 and the material cost was just under $500 for nardo gray. our work also comes with install warranty and a ceramic coating

if you planned on doing this yourself this exact nardo gray is currently at $515 shipped from cheetahwraps

cheetah gloss nardo gray. very similar

He literally said the name in the video.

theres an f80 m3 on my page, basically the same car that has the quarter panel install in it. these bmws are rather easy only took me 2 days

I’m running into the same problem bro? Wrapping my Q, broke 2 clips 20mins ago 🤦🏾‍♂️ no one shows how they wrap the trunk

@@Q50_lifestyle nah facts, heard you gotta heat them up and squeeze them from the back

@@anthonyydo damn, I guess I should of tried that before braking the rest off 😮‍💨 only got 1/5 left on 😅

So the skirts are wrapped in 1 piece along with the quarter panel, these are rather simple. Just run some knifekess tap on the quarter and skirts inside the jamb to cut a nice straight line and without damaging the paint. As for the cold it most certainly can be a factor, ideal work temp would be around 72-78° for most brands. You can do it in the cold but the wrap will be more susceptible to tearing and having a harder time with initial tack. Can use your heat gun to warm the panel up to help with initial tack if there’s an issues with that

always recommend ordering a full roll “5’x75’

if it’s original paint you’re good to go! just use a proper brand name!

glad i could help!

it was a last second decision made by the owner when he came to get the car he decided to see if we could try it and see how it will hold up. super simple though should take like 15-20 mins to do all of them really quick

@@cgwraps. 👍, hows it holding up?

@@teamsynikal38 never had any issues surprisingly. but i’d definitely recommend doing it proper and sanding them down and priming

we always recommend using 75' for every vehicle. best to have a whole roll then come up short. realistically youll be fine with 60'

actually neither. he’s my closest friend and wanted me to try and wrap it as is, wasn’t any guarantee i told him. as the correct way would be to sand, prime, paint then wrap. but wrapped it as is. and it’s actually never lifted even over a year later. which i still can’t believe

i’d recommend to still do it correct. if this was a normal customer i would have never even touched the plastics. if i did they would have been sent out for sand, prime and paint then i’d offer to wrap them

I think apex 5 spoke

this one was on the trunk. on other makes and models there’s usually a metal retainer clip or can unscrew from the top after unscrewing the antenna portion. all of them are different and i’ve never removed a nd miata antenna from the side panels sadly

@@cgwraps. Tank you i removed everything i could and still couldn't figure out how to pull the antenna out. Thank you!

@@mazurestar worst case can wrap around it. cut the panel to size and then poke a hole in the wrap and slide it where the antenna is and start from there, i do that on older Z’s as they are normally rusted on

@@cgwraps. that's exactly what I did! I appreciate you following up!

@cgwraps What brand and color is this?

Did you watch the video? 0:17

You would just need the 60”x75’ roll to complete a model 3 and you’ll have plenty leftover in the event if any mess ups!

Shoot me a dm on instagram if you need any further assistance

yes sir

cheetah nardo gray

yea but no room for error, and have to cut efficiently. so when cutting the quarter panel you are also cutting out the doors and skirt out of the same piece. both front and rear bumper out of the same sheet as well

@@cgwraps. ok thank you boss I’m gonna give it a try and see how it goes thanks for the tip 👍🏻

Cheetah wrap, gloss nardo gray

won’t damage the paint if it’s OEM paint. a lot of cars will have resprayed panels and the owner may not be aware of, generally the wrap shop will go over the vehicle condition and inform you, even if it’s repainted it doesn’t mean the paint will come off. just depends how well the paint was prepped. can get a smurf blue from cheetah wrap for $509 shipped! ot give it a shot yourself!

@@cgwraps. it is a 2023 model, brand new. I would pay someone to install it. I just don’t know how much the labor would be

@@Joroz006 gotcha, yea that will vary per shop and their experience. we personally charge $2500-3k labor fee for that vehicle varying on current color of car, color going on car, aftermarket parts etc. you’ll get prices anywhere from $1600-$4k again varying per shop and experience. just do your research on the shop and ask to see vehicles they’ve done!

@@cgwraps. thank you so much. I would assume the ones that are 2,000 don’t do a quality job

@@Joroz006 not always true. Could be a smaller shop with less overhead, a new comer who happens to be talented and listening quickly. I’ve seen good work cheap and expensive work bad before. Best bet is to research a shop and check out some prior wrapped vehicles and how well they are holding up

Running 215/45R17 Michelin PS4S

Shoot me a dm on instagram @cgwraps I should have a video of it being done either on this or other cars and I can go over inlays with you as well