Hello Sir, your videos are very useful. Thank you very much I am newbie to Drone building DIY. I have Pixhawk 2.4.8 and wanted to use it with 4-in-1 ESC along with Raspberry PI 4 or 5. I watched all the videos out there on this scenario and all of them uses individual ESC's for each motors. I came across encoder to use but surely not understand it. I watched this video about connecting Raspberry PI to Pixhawk so I think I am okay there but not connecting 4-in-1 ESC to Pixhawk. Would you be able to suggest how I can get 4-in-1 ESC connected to Pixhawk? Or if you could do a video on it, would be awesome. Thank you so much for all your help in advance sir.
@berayuksel47024 күн бұрын
How did you provide power to Nvidia Jetson Nano from the battery?
@nathanvidal917210 күн бұрын
Hello, very nice video, I have one question though. I have some real trouble calibrating my esc's, how did you do that? I have exactly the same as you, though my RC is using elrs. How did you calibrate your esc?
@DhruvArne-ff8kw18 күн бұрын
Libxslt is not installing
@anaisabelcarvalho254718 күн бұрын
Great job!
@arusharma539319 күн бұрын
Heyy I am also working on a similar project can you suggest which camera would be good to use with rpi4 for object detection tasks from a drone?
@AkshayKumar-qc4rz29 күн бұрын
How do you have only 5000 Subs! The quality is too good
@RetroDaddyPHАй бұрын
For those looking into a 3d printed enclosure. An Ender 3 enclosure is like $40 on Amazon.
@monireolАй бұрын
❤
@_zoidАй бұрын
Supplies needed: wood, screws, more screws, a broken drone
@mohamedaminefaiz6378Ай бұрын
Perfect work! Please continue, you're helping a lot people with these videos!
@felixquehlАй бұрын
I had some problem controlling the ESC from a RPI5, at the moment my guess is that the PWM signal is 3.3v logic which is to week for my particular ESC. Did you specifically use ESC that run with 3.3v PWM logical voltage?
@piconanoАй бұрын
I'd like to watch the rest, but your "music" is too annoying.
@AlkNAАй бұрын
Great work! What image did you boot your Nano from? I used the official one from Nvidia but it seems very outdated.
@legotech101Ай бұрын
There are some free programs that do the same thing, no need to wait hours for this one to install.
@antonyshani9705Ай бұрын
Sir can i use this same code for raspberry pi 5
@dsyeta174omkshirsgar2Ай бұрын
jetson says permission denied on THS1 port error 13
@AdamWeatherall2 ай бұрын
Great work here 👍
@ChilliCao2 ай бұрын
You gotta fail many times in order to know how to win, you've got it my friend!
@martinmacko72972 ай бұрын
Hi, is the code correct? Compilation error: 'TCCR1A' was not declared in this scope
@diyjeepguy77132 ай бұрын
I just got into 3d printing literally yesterday, & when ever I start something (even though I study up ahead of time) I dive right into it. I chose abs because thats what I read was the best for interior parts for vehicles. The first parts I printed were 2 shifter Knobs (army green ABS), I noticed right away that I was having a few layers delaminate but overall it came out well enough for a Usable prototype. After that however any part I tried to print (black ABS and Neon Green) were coming apart so as I read more I learned about the need for an enclosure so here I am. Your build is exactly what I was thinking would fit my needs. Thank you for the Video and awesome work.
@Anthony-lk5dm2 ай бұрын
Hey I'm happy to pay you a premium for your time to help me remotely to achieve a project exactly like this.
@ttaylor99162 ай бұрын
maybe next a simple diagram that shows that you connect rx to tx?
@yakacm2 ай бұрын
You got a big enough soldering iron there fella? I think that model is meant for plumbers to braze copper pipes, lol. Joking aside what a great video, I wish you lots of luck for the future.
@will2010842 ай бұрын
*SkyNet Activated
@45throoster2 ай бұрын
Okay now set your code to run waypoint missions at the park until it detects a person and have it follow them.
@Luka11802 ай бұрын
I want to make something similar for my Ender 5-Plus. Any chance you’d like to help out figuring out how to do this best, size wise and everything? You got a Discord handle…?
@AarohiJadav2 ай бұрын
what are the connections between pixhawk and jetson could u tell specifically
@Kepusu2 ай бұрын
Tip. Pre heat the bed like 15-20 min before printing to heat up the enclosure.
@KoreyMacGill3 ай бұрын
3d printed for about 5 years. got out of the hobby and want to get back into it and i LOVE this simple and clean design. going to steal it and supersize it for a comgrow t300. thanks for the video! great stuff!
@manohar37873 ай бұрын
can we replace the arduino with a 555 timer which is a lot cheaper
@Film-maker3 ай бұрын
Hi Matt, very informative video! Would you know which new flight controllers will work with Jatson boards?
@WRDO3 ай бұрын
Amazing😮😊
@jaimecandelmartinez12333 ай бұрын
Really fun and inspiring video man!👍👍
@MrWilde3 ай бұрын
Like my favorite t-shirt says. "I don't know how to act my age, I have never been this old before" Love Your Work
@chetmyers70413 ай бұрын
Education is expensive, but a smart man can learn from his mistakes. A wise man learns from the mistakes of others, but a fool never learns from his own mistakes.
@vtrandal3 ай бұрын
Are there at least two variants of the Oak-D-Lite: Fixed focus and Auto focus. If that is indeed the case which one did you use? My apologies if you mentioned that in the video and I missed it. I'm guessing you chose the Oak-D-Lite with Auto focus. Yes? No?
@akamatchstic3 ай бұрын
It’s been a long time since I made the choice, but I’m 90% sure it was fixed focus - the auto I believe has issues with the vibrations due to the propellers
@DavidGutierrezhi3 ай бұрын
bro what i have to do in the px4 im using the cube black, to enable mavlin in telemetry 1 or 2?
@frajr19863 ай бұрын
Really nice and well made but for the ABS you need a heater. With it no warping
@Taras1953 ай бұрын
Wew! A new weekend project is waiting for me! Going to modify your design heavily (dimension-wise) to accomodate to Neptune 4 Pro, mainly to reduce noise, with abs printing as a valuable bonus!
@DavidGutierrezhi3 ай бұрын
bro please enable OpenPlotter with OpenCPN, olso i can't stream the internal raspberry py 4 camera into the mission planner camera divice . if you got a little bit of time, pls make a tutorial
@Dragoneer3 ай бұрын
Great tutorial man, that's gonna really help me out later. I see you cut the 5V wire, but I also would like to know, is the PixHawk capable of supplying the full 20W range specified for the Nano through the telem2 port? That would be really handy as I want to install the board to the drone itself. And I'm not sure that I trust the PixHawk board will permit that power draw... Edit: Figured I would use a buck converter from the battery instead, that way I can guarantee that it is capable
@gozita124 ай бұрын
What controller do you use? I notice you list everything else that you use for this project but not the controller.
@akamatchstic3 ай бұрын
It’s a Spektrum DX7 (gen 1 I think?). Got it cheap off eBay a while back!
@vtrandal4 ай бұрын
That is quite an accomplishment.
@vtrandal4 ай бұрын
Fantastic!
@prathamvjain75694 ай бұрын
Bro I’m building package pickup drone using ros and jetson nano and using pixhawk for flight control
@alexandergeorgiev26314 ай бұрын
Can you use ttyTHS2 instead?
@valpercinabanalan85764 ай бұрын
Ghizzz crist! just get a cheap Ender V2 or larger chea FDM printers and avoid to much all that glue thing! the cost you've used in all that glue epoxy and all are just the same as a cheap big volume 3D printers anyways!