Hi, yes it is but this product has been discontinued. However some of our customers may have stock to buy

Hi, sorry no it can not be used on GEL batteries

Does the next level (24)charge the gel battery ? Thanks

@@davidgetty6729 We don't recommended this charger for use with GEL batteries

Hi there, Maypole do not sell directly through Amazon, so you will need to contact the seller you have bought the cover from. You should be able to see this on your order confirmation from Amazon. Many thanks

Hi, it is supplied with a monitor power cable that plugs into the cigar lighter

Hi, yes it can be fitted without the ball but it is better when the caravan is unhitched to have the security ball. A number of our customers sell the security ball, please search for part number SH54126 to find a stockist.

Hi, The pump simply inserts into the valve located on one of the legs of the event shelter. Many thanks

Hi Matthew, Can we just clarify what you are asking? You'd like to connect a pop up tent to the sun canopy? Many thank

@@MaypoleLtd1 Yes. to MP9509 pop up tent. It's doable. Happy to modify parts upon purchase, like install a zipper that would make the attachment more secure.

Really like this, though would have liked see through sides. Just a bit concerned if it would fit onto the very narrow awning channel that’s in my wind out Fiamma f45 awning.

Just been on line and see it has both the 4mm and the 6 MM kador strip so yes will fit, AND it now has optional see through sides - looks perfect for this elderly , inactive ancient lady to cope with!

HI We're sorry to hear you are having issues with your reversing camera. Our technical team have advised that you attempt the pair process again. Once a camera pairs to a monitor, it will forget it’s old pairing. If they paired ok when next to the monitor out of your vehicle, but do not link when fitted, consider signal strength or possible interference too. Many thanks

Hi, you can use the Find a Stockist page on our website to find your nearest retailer. www.maypoleltd.com/find-a-stockist/ Many thanks

Hi, We would recommend attempting to pair the camera to the monitor again. If possible, move the monitor as close as possible to the camera and complete the pairing process as detailed within the instructions, ensuring the pair button on the underside of the camera is fully depressed. Also, please ensure both the camera and the monitor are Version 2.0 pieces, as version 2 components will not pair with version 1 components. You can find this on the packaging. Many thanks The Maypole Team

Hi, here are the main comparisons - the rated output of the two devices are the same. MP7423 has a 5 step charging cycle, MP7424 has 8 stages. MP7424 offers a gel charging program, MP7423 does not. If power to the MP7424 is interrupted, it will resume on 1A charge mode when power is restored. We hope this helps!

@@MaypoleLtd1 Thankyou for the reply, I decided to give the 7424 a go 😍

@@MaypoleLtd1 Hi guys, do you know what the normal level of noise is from this device as I'm struggling to withstand the high pitch whine. My mother can't hear it but she doesn't have fill range hearing like me. Thankyou

@@warwickdean Hi, that is an invertor whine. It is not a fault, but more of a feature. Some units are more noticeable than others. You could return the charger to exchange it, the replacement may be better but we cannot guarantee it.

Hi, no they don't. There are doors on both sides. Many thanks

Hi, have you tried our find a stockist page www.stronghold-security.com/find-a-retailer

@@MaypoleLtd1 I have, but your stockers websites mostly don’t show your products. I have emailed you directly

Hi, this hitchlock has not yet arrived to us to distribute to our stockists. We will announce when it is in stock on our socials

@@MaypoleLtd1 ok, because I am in the Netherlands and these hitches are very very common.

@@dean-does-stuff-81 Hi Dean, they are now in stock but we do not know yet who will be stocking or delivering into the Netherlands. We will keep you updated.

@@MaypoleLtd1 I can also collect them on a visit to the uk. I am guildford based when I am there! Any stock holders in that area?

@@dean-does-stuff-81 Hi, not yet. We can see that our customer Taunton Trailers ship to Europe via their website or alternatively send it to an address in Guildford

Hi, the wheel bolt specification provided with this product is intended for permanent use. Providing that when fitted it is tightened to the correct torque it can be left in (the bolt is not a locking wheel bolt).

@@MaypoleLtd1 Thanks

Hi, thank you for the nice comment. We are trade only so don't sell direct. You can find one our stockists by visiting www.maypoleltd.com/find-a-stockist/

Hi, are you in Spain? Visit Menabo's website for your local stockist

Hi, are you referring to the single diode? If you need further technical support please email [email protected]

Hi, if the battery is AGM please select Winter mode, and if it is non-AGM select 12V Standard mode. Many thanks, the Maypole Team

Thankyou

Hi, the standing voltage of the battery is less than 7.5V so the charger thinks a 6V cell is connected. Please attempt to charge the battery via other device so it’s above 7.5V and the charger will recognise it correctly. Many thanks, the Maypole team

Hi, as there is no display and just a backlight, it sounds like a replacement is needed.

Hi, are you referring to the pad poles? These poles have spikes to go into the ground and provide extra stability during bad weather and keeping the awning snug against the caravan or motorhome. Many thanks, The Maypole Team

Hi, it must be plugged into the mains to charge the battery.

@@MaypoleLtd1 Not very smart then 🤣🤣

Hi, yes they are optional for mounting accessories to the roof bars

@@MaypoleLtd1 Thank you

Hi, where possible, it is good practice to not use the negative battery post as most vehicles will have a designated post on the chassis for this specific purpose, but if it is not possible then you just use the battery post instead. As long as you have a good earth connection.

thank you

Hi, no it can't. You would need one of our metal cased battery chargers, part numbers MP713, MP716 and MP730.

Mine also when charging Ford Transit Tipper 2 x 6V Batteries , the Mode Button doesnt change anything - Batteries fully depleted for some unknown reason. on charge now at 2.00pm 10th NOV 2023 Will update progress if time permits Charge is creeping upwards from 1.5 to 2.0 30 mins later

You could leave a locking wheel but fitted, but you would need to ensure they are torqued correctly

Hi, the charger will indicate reverse polarity and enter error state.

Hi, yes the red backlight indicates charge status, the green backlight indicates charge complete/maintenance mode.

I'm assuming they are optional for carriers etc that require them but it would be nice if it was mentioned SOMEWHERE

read instructions it tells you where to put them

@@brianjones7970 that's not what he asked. I just bought somemof these roof bars and can't see a purpose to the 4 bolts

Peter Jones , he did, but the caption said chassis.

Hi, It is considered best practice to connect the negative clip to the vehicle chassis; most vehicles will have a marked connection point specifically for this purpose. In instances where this cannot be achieved direct connection to battery posts is acceptable.

It doesn't do any harm, usually the battery has a metal plate you can attach it to, but its fine to attach it to the negative terminal. I have no option on my rs3 as the battety is in the boot and no other metal there. Well, it is for ctek chargers. I always attach cables, then connect the charger, then turn on plug socket power. If anything goes bang I'm 10m away.