Sounds like all the before clips were done with tone halfway down with it opened for the after clips. Amazing what some new electronics can do. I remember hating the tone knob on an old guitar until I replaced it with a slightly different value cap.

This is how every bassist who can play guitar plays. 😆

'Do you want to rock AND BE A TERRORIST?!?!?!?!?'

Amazon no longer selling these cables :/

Hey, thanks this is really helpful. I have got a kit P bass with everything pretty much done i.e bass head has been finished, soldered pots, I've glued the neck to body pretty easily as it was pretty flush... Only thing is that there is no hole from cavity to the bridge like yours. How do you attach the ground wire to the bridge, do you need to solder it? Thanks

What a dick thing to do. I sat thru your whole stupid video because the heading gives the impression Fxck it I’m out.

hey, how did you drill the hole from the control cavity to the bridge for the ground wire?

Talking about what you sell on your website is a bit tiring...

My 88 has a 500 tactical grip and adjustable stock, rail mounted on the top, rear sights from a crossbow, front optics I drilled to snap onto the factory nib sight, and a 17 dollar barrel heat shield that is badass! And strap mounts. Grand total cost- 285.00

Very cool! Thank you so much!

Thank you sooooo much. I have no imagination. This helps a lot.

the commentary on the build video is priceless.

Metal hangers???

Awesome build dan and god bless u,my friend...Ernie

Hello , killer finish, congrats. Did you given color with water based stain? Cheers

Just wanted to say I got one and I am pleased as punch

I recently purchased an SDS tokarev Hammer 12 gauge pump action shotgun that uses Mossberg stocks and four ends with a bolt system similar to Remington 870. It accepts many Custom features made for Mossberg. I paid $150 for it from Bud's gun shop.

I'm trying to decide between Vangoa and the Donner Acoustic Electric

Is the binary trigger illegal if you get it added.

I've never tackled a guitar build, let alone finishing one. The reviews of these product was exactly what I needed to move from finsihing to assembly. For a novice like myself ( even though I qualify for the silver discounts..LOL) this video was gold. Thank you. FWIW, I went with the Zinsser...

Damn man, that's the best description of knife sharpening I've ever seen. Great Job. Outstanding. Thank you.

I'm sure the customer just loved watchin this video of you saying the reason you only went so far with quality sanding is because you don't like sanding. They're going to love that! *lol* And rinsing your hands off with soap is called, "Washing your hands". Haha! Sorry, couldn't help myself.

This will do nothing, other than make more holes to weaken the wood.

I bought a used jackson and someone must have watched this video and then tried to level the frets. The problem is they didnt do it right and the frets arent round but more like triangles now and they took way too much fret unless they were that bad idk. I bought it anyways cus it was cheap and it played ok still and i wanted a project

The Olight Baldr Mini is just fine. User error on your part is the reason it falls off!

14:12 Careful, you could shave off your tattoo with that thing

To remove the pop of the switch watch the video on repair. Two 25c resistors on the back of the switch. Takes 5 minutes and then will be silent. Or replace the switch. It buy heaps (150) of pedals and most are great on guitar. Even the cheap wireless system 15$ are fantastic. I have had mine for a year and they work very well.

Yo i just was thinking is there page out there that involves guitar and guns lol well here i am

Ive learned that you buy the name rather than the quality of the product behind the name.. ive bought ten dollar tools that last way better than 100-200$ tools...

Wouldnt it be better for kitchen knives, if it was 15-17 degrees?

Just subscribed to your Patreon❤

Wunderbar.

This is the awesomest

Thank you for this video. I got so much information.

I have large dowel plugs I insert into the jack hole when rounding. Don't feel too bad, I just mangled the neck pocket on a $500 body. I have all the wood fixed. I think after it is stained, the only person who will actually see it is me.

I remember many years ago, I had the option to buy a Remington 870 or a Mossberg 590 for $300 as my first shotgun and I chose the Remington… I still kick myself to this day

The best way to polish is with a dremel. You don’t need to press down at all if it gets hot ur going too fast, staying in the same spot too long or not using enough compound.

thank you for that review my friend ! it's active or passive ??

Helpful advice I hope when it comes to safety there is never never compromise no sights no shoot that's the bottom line

Posso ordinartene uno?

È bellissimooooo…….

Imagine that you have 3 seymour duncan p-rails 😅.... In same wiring

Dude you’re so awesome! Bout to keep this thing in my back pocket, happy practicing everyone!

Which one works better for guns?

Has anyone been able to co tact Dan? I bought an instrument from him and had some questions for him

Would .25mm also be for electrics?

Got a diagram for that 'fancy, practical' wiring job you did there?

I have this guitar but a left handed version of it luckily i have a friend who helped me switch the strings furthermore I love it

So there's no room for Fret wear, so I'll pass

How does it work with a double blade (4 bar)?