I got 2017 honda accord sports edition i recently noticed air coming from top engine cap when it's running where they wrote 0-20 on cap I am not sure it's normal?

I AM A 76 YEAR OLD MAN... i whent outside did it your way and man it worked ... i thank you Sir....

best video on this subject on KZfaq!!!!THANKS....

Is that considered a transmission service? What about the filter?

Do the blades need to be in a certain position to each other?

Thank you for making this video.

Well. You do know they all get glossy with age. Why ruined a good pan

Thanks for the videos you post. I started with the CVT fluid change. I have a question, I have a 2015 CRV Touring. For some reason, when turn in the car, all the safety feature lights start to show up on the dash. No engine light. Ever see that before? I tested the alternator and some suggested. It’s good. I have the ability to work on the car so any advice or direction would help. Thnx.

Very best video yet!

Nice. I would really like to see how you would deal with a Lodge cast iron wok. The curved surface would probably prove very challenging.

Was expecting the wheels to be fatter

Great video; thanks for sharing 👍

Blue it in the BBQ first (slow heat up then increase; no oil; wait till it turns blue)

This was an extremely helpful video, just completed the same repair, couldn't have done it without this vid. 👍😇

Forgive me for asking, but why would you want to put a tube in a tubeless mower tire? The next time you get a puncture you will have to do this whole process again. With a tubeless tire, often all you need is a tire plug and you're good to go. Tire slime is messy, but it has it's uses. In my case I have hedge trees on my property and I pick up thorns quite often. Got tired of plugging my tires and filled them all with slime. I haven't had a problem since.

Great video you are a good teacher with a lot of good advice.

Becareful 2013 have two different AT, CVT or early one, look at the dipstick, if no level check at the stick, it"s CVT.

Helped me out a ton, just wanted to let you know my appreciation, thanks!

May I ask if anyone knows whether the torque wrench is required? I'd rather not buy something unnecessary. Thanks!

Best video on this topic

Thanks. Fought one for an hour after watching four other videos. Your advice of starting with the Vice grips and using screw drivers (I was using end wrenches as tire irons) got me over the goal. Was just at the point if swallowing all my pride and taking it to a tire store. Taylor.

Don’t do it, the roughness holds butters and oils better. They’re made that way on purpose.

I have and use a Lodge 12, 10. & 8 inch cast iron skillet. They are seasoned well. None of the needed work, from the factory all an nearly non stick, not sure what people are doing to have issues, but strongly suggest they are not well seasoned and they have them too hot. Dial it down and season them 5-7 times and they are good forever. I bake mine in the gas Bbq upside down with canola oil.

costco vs bjs wagon anyone have any suggestion？

Thank you for this. I just put a new tube in my lawn tractor tire and save a lot of money doing it myself. Appreciate the detailed video.

What's part number for carb

Buddy just be talking

Your looks really good my friend.

Thank you

Thanks 🙏 god bless you

Best video by far on this subject.Very good tips that other videos did not mention.This will make my tube install go alot smother.Thank you

Capacity 2.5 qts…

the valve stem is in the center of the tube. On the side of the tire. So it seems out of line.

The rough finish is part of the non stick,if your food is sticking your cooking temp is to high,a smooth pan wont hold a seasoning,sanding cast iron ruins it

Thanks for the video, Worked for me as described.

Excellent. Just what I wanted to know.

No Vids show where to lift the front, from the frame. Side lips are mentioned are mentioned in the manual for jacking. Jack stand-subframe bolt for backup safety , works for me.

Meter reads 100% non stop.I have the same one lol garbage.

sweet...

No need. Seasoned my rough cheap ebay pan twice & nothing sticks to it.

That was great. Didn't know about the vice grip on rim trick. Also, spraying the lubricant around the edge for easier seating upon inflation is something I should do. One thing I do after adding just a little air: spin the tire to make sure the stem is straight up through the hole.

Is the drain crush washer same for the manual tranny

Followed your instructions step by step and mower now works great. Most tricky step is valve adjustment. Saved a lot of money--thanks. Now if I could only find a good quality head gasket that doesn't fail every 6 months or so.

You the man!

Woo and you made sure we knew to do the other side at the end. 6 years later and this is still helpful!

What about 130,000 miles?

Thanks for the vid good description of what needs to be done gave me great day

Thanks it worked. My tires were good

What if the tpms light comes on flashing first stays on with trac light and the light with the steering wheel with exclamation mark

I’m going to put a valvoline fluid? Is this will ok?