Settings? And the refracting plate it’s ss or aluminum?
@nejestudio6867 сағат бұрын
13000mm/min,30%.That's a black card paper in the back.
@luizaugusto964321 сағат бұрын
Hola buenas podría decirme cuál parámetros utilizan?
@nejestudio6867 сағат бұрын
Hola!13000mm/min,30%
@Fl0pnikКүн бұрын
I am none of those things except for the last one 💀
@hectortorres85802 күн бұрын
How long takes to do that and at what setings?
@nejestudio6862 күн бұрын
Hi it's 430mm/min, 2 hours.
@anauseros374 күн бұрын
Settings with E40?
@nejestudio6864 күн бұрын
11000mm/min,60%
@Trittihn08156 күн бұрын
Nice idea 👍 As I can see you are using a cable track. Could you please provide more information how you mounted the rail and which rail you have used? Would be really interesting
@nejestudio6865 күн бұрын
NEJE Max4 rails
@romansemenov23937 күн бұрын
@romansemenov2393 0 секунд назад Hey , can you comment - do I right understand - first of all , you put some colors on the tile , let it dry and then you put the black color and also let it dry . All paints are on acryl base , is in it ?
@nejestudio6865 күн бұрын
yes,and just use normal spray paint!
@juanandres97418 күн бұрын
Hola que aerosol usan ?
@nejestudio6865 күн бұрын
hola pintura en aerosol normal
@hectortorres85808 күн бұрын
What the settings?
@nejestudio6868 күн бұрын
hi,it's 3000mm/min,50% power,as I wrote in the title.
@hectortorres85808 күн бұрын
Higthh?
@nejestudio6868 күн бұрын
The height is always 25mm for E80.
@FiglioBastardo8 күн бұрын
How were those colors achieved?
@nejestudio6868 күн бұрын
Spray the color you want on the tile before you coated it in black
@FiglioBastardo8 күн бұрын
@@nejestudio686 ahhhh ok. That makes sense and it's a pretty cool effect. Great job.
@nejestudio6868 күн бұрын
Thank you,you can make lots of creations with colorful spray.Like on foam/canvas/mdf/ceramic.Same method.
@myopinie70148 күн бұрын
Very clever
@nejestudio6868 күн бұрын
thanks!
@myopinie70148 күн бұрын
Hi Neje. I like the video! But why or rather how do you get the colour gradient from pink to yellow to blue?
@nejestudio6868 күн бұрын
Spray the color you want on the tile before you coated it in black.
@wandadimasi10 күн бұрын
Hola con una neje 3 plus como hago
@nejestudio68610 күн бұрын
Hola
@wandadimasi10 күн бұрын
@@nejestudio686 holaaa
@prmvera14 күн бұрын
How long is the max4 going to stay at that price??? I already own one.. at that that price I wouldn't mind getting another 🤗
@nejestudio68614 күн бұрын
Hi!!!seems that you had a good time with max4.The rollback deal will be finished when max4 is out of stock.We only have limited quantity left in warehouse now.You can catch this chance cause it's the annual biggest discount.
@nejestudio68614 күн бұрын
Now I couldn't tell you a specific time cause we are on sale on Amazon/ebay/aliexpress/Shopify.Really hard to estimate the deadline.I suggest you to get this price within 7 days maybe.
@niceboy76114 күн бұрын
Just on the neje shop and I was trying to get the max 4 with the extended bit with the aluminium cutting bed is that still available and it had air asist with it is that all you need or do you need your own air supply I went on the ebay shop and you don't have the same offers the extention only comes with belts and no aluminium cutting bed and they don't sell the air asist on the shop they do but no uk plug hope you can help as im a newbie
@nejestudio68614 күн бұрын
Hiii,the [Max 4 E80 Large Area Kit] is in very low stock and not on ebay.It comes with fish air pump and we send you uk plug.The fish air pump is used for thin materials.We suggest you to order a 5-8 bar air compressor if you frequently cut thick materials.
@victorgonzalez-lm6dk15 күн бұрын
Hola tengo un neje 3 plus, quisiera cambiarle el módulo láser más potente, cual sería compatible con la placa que trae?
@nejestudio68615 күн бұрын
Hola,A40640 and E40 neje.shop/collections/all-products/products/40w-laser-module-laser-head-for-cnc-laser-cutter-engraver-woodworking-machine neje.shop/collections/all-products/products/e40
@luizaugusto964316 күн бұрын
Hola buenas! Qué material es este que usted utilizó?
@nejestudio68616 күн бұрын
Hola!! esto es caucho, sello de caucho:D
@myopinie701416 күн бұрын
Hi NEJE Where can I get the plans for this?
@nejestudio68616 күн бұрын
Hi there,you mean the project file or our deals?
@myopinie701416 күн бұрын
@@nejestudio686 Yes, the project file please. I bought the NEJE Max 4 E80 2 days ago!! I cant's wait to receive it.! Now I'm collecting project files...
@nejestudio68615 күн бұрын
WOW,I'm so glad you caught our annual biggest discount!!I will ask my teammate to share in our FB group.You can find many free files in our group!!
@nejestudio68615 күн бұрын
We also have a tutorial sharing how to find free files in our group.You can check that out!
@anauseros3717 күн бұрын
WoW!!!! Settings???
@nejestudio68617 күн бұрын
20000mm/min 25% :D
@roywilliams774018 күн бұрын
Amazing!!
@nejestudio68617 күн бұрын
Thanks!Just uploaded another video engraving gift bags.And good news,we are on rollback deal now:D
@oliviermeunier159420 күн бұрын
Is it a special tape?
@nejestudio68620 күн бұрын
Yes,it's called laser marking paper.
@prmvera19 күн бұрын
I'm still having issues setting up that tumbler.. when are you going to make a video showing examples and better explanation on the setup instructions?? I keep referring back to the one you tagged me and still keeps turning over a dozen times.
@nejestudio68619 күн бұрын
May I know the problem you are having?You can make a video and send to our teammate in Facebook group.That will be faster to solve your issue.
@fruterrence643520 күн бұрын
What can be the problem
@fruterrence643520 күн бұрын
My neje max 4 E80 stop cutting
@nejestudio68620 күн бұрын
Hi,it's better to make a video of the trouble and sent to our engineer.Are you in our fb group?Our official teammate is there to help.
@MYTH.BUSTERv320 күн бұрын
Is it also possible to cut through aluminum blocks?
@nejestudio68620 күн бұрын
Hi,mechanically diode laser can't cut through aluminum materials and transparent acrylic.But it can cut through thin stainless steel.
@anauseros3724 күн бұрын
settings, please!
@nejestudio68623 күн бұрын
8000mm/min 85%
@EmmaNikolic25 күн бұрын
What’s happening?
@nejestudio68625 күн бұрын
Everything's fine.
@prmvera25 күн бұрын
Settings please? Just to give us an idea as to how to go by making a similar project
@nejestudio68625 күн бұрын
All the settings of shorts are in the description section,maybe you can check that?
@hectortorres858025 күн бұрын
Great job , I buy same machine butt I have problems setting the coneccion between computer and machine can help?
@nejestudio68625 күн бұрын
Yes sure.You can check the Machine Guide 5 Software set up in this playlist.It's video tutorials made for beginners. kzfaq.info/sun/PLTtjKZMYvDOYZ_4U1yb4MhM5ZPVBu8bE6
@hectortorres858024 күн бұрын
@@nejestudio686 thanks
@Duupje25 күн бұрын
still missing a small router for cutting wood :-)
@nejestudio68625 күн бұрын
Can use our laser module to cut wood.
@Duupje24 күн бұрын
@@nejestudio686 for deep letters and 3d cutting :-)
@nejestudio68624 күн бұрын
Oh you mean the motorized Z axis!!May I know your machine type now?We have upcoming new upgrade.
@Duupje23 күн бұрын
@@nejestudio686 Neje Max 4
@Jen_blue126 күн бұрын
There so pretty!! ❤️
@nejestudio68626 күн бұрын
Thank you!!!I love your cute videos!!
@xXTAZ1125Xx28 күн бұрын
Can you make a video on how to set up each configuration of air assist please.
@nejestudio68626 күн бұрын
Hi,do you mean the configuration in Lightburn or ,the small air pump is like a fish pump you know,and the big air compressor is a 5-8 bar one,and there is one more air filter regulator.
@SirwanFatah29 күн бұрын
can cut other acrylic colors?
@nejestudio68626 күн бұрын
Hi,yes,but only solid colors.Diode laser theoretically can't cut clear acrylics.
@abuabowdableАй бұрын
Please specify the engraving settings, the distance between the laser head and the material, the laser power and speed I have a problem connecting between the laser machine and my phone via Bluetooth
@nejestudio68626 күн бұрын
Hi,there.The distance between the laser head and material is 4mm if you are using E40.The settings are different for different materials so you'd better have a test before you make a project.You can let me know the material you use and I'll tell you a parameter to start!BTW,it's suggested to use Lightburn software to run NEJE machine,NEJE software is just a bridge to make NEJE machine more functional with Lightburn.
@nisonusMusicАй бұрын
What is the thickness of the wood? Amazing job done NEJE
@nejestudio68626 күн бұрын
it's 3mm plywood my friend.
@nejestudio68626 күн бұрын
If you need the file you can join our FB group,we share files there.
@prmveraАй бұрын
Settings?
@nejestudio686Ай бұрын
5000mm/min,don't need to set speed,it's only the blade.And be very careful when you set the height of the z axis.The heat transfer vinyl is too thin,so the parameter need to be super accurate.Remember to do tests on small piece first.
@jasonpedicord7354Ай бұрын
What is the material you put on the glass?
@nejestudio686Ай бұрын
Hi,it's called laser marking paper.
@Xxxtentacion12340Ай бұрын
Can you make me one
@nejestudio686Ай бұрын
sure,come and get this one!
@diegomonsalvo7740Ай бұрын
Que material es?
@nejestudio686Ай бұрын
es una tarjeta de presentación de aluminio
@prmveraАй бұрын
SETTINGS?/?
@nejestudio686Ай бұрын
1200mm/min,90% power.This is the setting we used on this metal knife,the result will be quite different if the material we use are slightly different.Maybe your result will be more colorful.Just try adjusting the parameters a little bit.
@diegomonsalvo7740Ай бұрын
Que material es?
@nejestudio686Ай бұрын
es madera de pino
@Miles____Ай бұрын
These videos are the worst. No imformation about what laser, the speed, power. Nothing! I really like to watch laser videos especially with neje lasers because I'm using one but your videos are just annoying poping up in my recommendations. Was to sell your product, not!
@nejestudio686Ай бұрын
Already add the settings.Thanks for reminding.
@oliviermeunier1594Ай бұрын
Is the bright suface a problem?
@nejestudio686Ай бұрын
no,it's working good.
@He3nelАй бұрын
What do you mean adjusting the focus to 17mm? Do I need to turn the focus knob ? A bit more clarity on setting up focus would be great
@nejestudio68626 күн бұрын
Hi my friend,it's a old video so I went back to check the video.This is how it work:You can assemble your module to any height you want,not just 17mm.And then you adjust the focus knob until you see the smallest focus point.Then you are ready to go. The principle is:N40630 is a zoom focus laser module,so you can always adjust the focus knob to find a smallest focus point at any height.
@davidsabag9204Ай бұрын
Looks like a joke, the neje max 4 e80 not engraving on metal.
@nejestudio686Ай бұрын
Hi,did you see the letters on the knife?
@davidsabag9204Ай бұрын
Hi i have this machin and if you can send the Definitions for ingraving on metal...its will be graet.
@nejestudio686Ай бұрын
Hi,it's 1200mm/min,90% power
@nejestudio686Ай бұрын
This is the setting we used on this metal knife,the result will be quite different if the material we use are slightly different.Maybe your result will be more colorful.Just try adjusting the parameters a little bit!
@luizaugusto9643Ай бұрын
Hola buenas cuál fonte de letras utilizaste? Gracias!
@nejestudio686Ай бұрын
Hi,it's Bodoni Bk BT on lightburn
@PurpleGPZАй бұрын
doesnt look like an E80 to me??
@nejestudio686Ай бұрын
sorry it's a E40
@Trittihn0815Ай бұрын
Which setting did you use?
@nejestudio686Ай бұрын
8000mm/min,80%
@JustiaFiatАй бұрын
Can I combine the automatic relay for internal small air assist with electromagnetic valve for external stainless steel? So small air assist is always running and large one only when necessary?
@nejestudio686Ай бұрын
The small air assist's function is to protect lens inside of the laser module from dust out side.So we suggest you to use small air assist with internal air tube.Use 5-8 bar air assist with external stainless air tube.
@sebastienhirrien4770Ай бұрын
good evening neje, I just bought a neje max4 E80 and I think I will have fun like a child with this beautiful and efficient machine, I love your videos a thumbs up and a subscriber in +
@nejestudio686Ай бұрын
Thank you so much for the feedback,feel free to contact us if you need help:D
@sebastienhirrien4770Ай бұрын
@@nejestudio686 well I'm having a little trouble with my Z axis for the adjustment, I'm trying to follow your videos but in English with the translation not easy, otherwise I have the Z axis motor when it goes up it goes too high and you can hear the engine making a tiny noise.
@nejestudio686Ай бұрын
Hi we will upload another video so you can select your language.
@nejestudio686Ай бұрын
Hi my friend,new update video,you can use the translation function on KZfaq now! kzfaq.info/get/bejne/o7qqlrh8mbCdioU.html
@nejestudio686Ай бұрын
The maximum travel of motorized Z axis is 45 mm,you can only input Z Offset smaller than 45mm.
@user-yr3lj2uz2yАй бұрын
How about Bluetooth connection instead of usb cable? Same procedures?
@nejestudio686Ай бұрын
Hiii,we suggest you to use usb when transferring the file.It's faster.After you transfer the file,you can unplug the usb cable.Don't need to use bluetooth or usb cable then.Cause the file is already in the machine's main board.