Bruh I dropped a dollar with some yayo in it and I’m tryna get it but fuck man this is a lot but thank you
@michaelhennessy89294 ай бұрын
Would like to see video of Hyundai Terracan centre console,2005 diesel removed, please.Mike, Southern Ireland
@Poochie19866 ай бұрын
Thanks for the help. Have to adjust the cable for the handbrake.
@QueeniesKillaCrafts-by4dz6 ай бұрын
Omg I can't hear you! I wish you hadn't lost interest in your channel. It was super helpful 😢
@rgrcooper6 ай бұрын
Speak up! I can't hear a word you're saying over that ridiculous music.
@robersonpaul57437 ай бұрын
What make is that
@fredplow94488 ай бұрын
The article was very straightforward and it made it some very simplistic, excellent job excellent post thank you very much for your time to go through that I can find what I need after that once I get it apart. So very much appreciate your job there keep up!!!!!!!!!!!!😊😊😊😊
@chironaimes8 ай бұрын
Oh this was so helpful! Thank you!!
@BLAKHARTFILM10 ай бұрын
The music is too loud and makes your voice difficult to hear and understand.
@BLAKHARTFILM8 ай бұрын
@@chironaimes I don't see very well and I like to hear the explanations of what he is doing. Thanks for your input.
@ebonyapplepy3906 Жыл бұрын
Your intro music is louder than you.
@petbytes7167 Жыл бұрын
Can that 2nd connector next to the cigarette socket be used for a 12V accessory?
@MrMac5150 Жыл бұрын
You do not know much about air bags do you, vehicle has to be going over 14 miles per hour moving before any air bag can be deployed at all.
@autorepairdiywithsam45239 ай бұрын
It seems that you know a lot about airbags or supplemental restraint system. But, do you know that an airbag can be deployed unintentionally or accidentally if you short circuit an electronic component of the supplemental restraint system. You might be correct that an airbag can only be deployed with the vehicle having a minimum speed of 14 miles an hour, but can also be unintentionally deployed if you short circuit an electronic component of the SRS while working in your car.
@autorepairdiywithsam45239 ай бұрын
So, I strongly suggest to disconnect the battery while working. I am not a mechanic. I am just a DIY guy trying to save money. And, I am just trying to help others who wanted to save money as well by doing the repairs or maintenance on their vehicles themselves.
@petarhavriluk26797 ай бұрын
I agree just look at the KZfaq vids that people make on setting of air bags under seat's
@jeffmarsten745 Жыл бұрын
music is distracting and annoying.. had to turn off sound!
@autorepairdiywithsam45239 ай бұрын
I am so sorry about that. I will not use background music on my other videos then.
@bluefallon6374 Жыл бұрын
I love the birds in the background.
@juliuskanuhi251 Жыл бұрын
If I can’t do it,can I bring the car to your shop?
@bwill578 Жыл бұрын
I literally can't find a u-joints or the lower intermediate steering shaft for my 2003 Mitsubishi Galant
@thenexthobby2 жыл бұрын
Wasn't sure if the U-joint should easily move up the shaft like that. Thank you, you answered my question. Now, it doesn't actually DO that on my particular car, unfortunately. We already dropped the subframe once, to install a new steering rack. Might have to do so again. :(
@foley151362 жыл бұрын
That was a proper torque wrench that you used to tighten the bolts?
@bigiecheese9192 жыл бұрын
Hey how do you get diagrams for stuff for all parts to know here everything is
@grimmyboss20792 жыл бұрын
Hi I have an issue whenever I drive on bad road I have knocking sounds and even when turning the steering I feel shaking as well . What could be the cause of it?
@robertboydston37872 жыл бұрын
lose the music so we can understand what you're saying....
@ravenscooper2 жыл бұрын
great job! thank you!
@falcongarcis69302 жыл бұрын
Great video. I have to take out the center console on a 2002 jeep liberty, can you help me?
@tonistarks28742 жыл бұрын
Good video, I diagnosed a Volkswagen with the same problem
@jonathanbaguinon44032 жыл бұрын
Good job kailian
@kevinshea58192 жыл бұрын
I love you.
@Gone_Rogue3002 жыл бұрын
Your picture is showing the e brake console that's what I need direction on how to remove.
@Live_with_Meaaa2 жыл бұрын
Thank you
@andreasf58822 жыл бұрын
Have similar, actually same knocking symptoms straight to the wheel...(opel antara) did you fixed it completely ?
@eltonherrera75242 жыл бұрын
Omg!! Thank you so much, I'm removing the rack and pinion and is free from everything else but the yoke but wasn't too sure how it would come out free from the rack n pinion... this video help me lots, thank you so much.
@azwanabuselaiman60383 жыл бұрын
can this damage yoke causing noise on uneven road or bump?
@alexkram3 жыл бұрын
Hey I had a clunking sound in the steering of my 2007 Corolla and I went to check this joint. It turns out the top pinch bolt was tight (lock washer was crushed down) but not tight enough to pinch the clamp fully so the clamp was slightly loose. I tightened both bolts and it is solid now. Free fix! Thanks for showing how easy this part is to get to and work on.
@edwinedwin6453 жыл бұрын
Great video !. Although annoying, would it be considered dangerous to continue driving with the knocking noise ?
@Montoya19913 жыл бұрын
Yes
@samialsalam44343 жыл бұрын
Juste remove upper part and move up and down reinstall and noise gone forever me it works try it before replacing part
@mwilson94313 жыл бұрын
Can you do a video removing the center arm armrest console by itself by itself for a Toyota rav 2000?
@sneakerboywawan42653 жыл бұрын
Is this suited for latest models of vios?
@Andy44Andy3 жыл бұрын
Do you know if you had 2007 or similar model of Corolla S with hard steering wheel? Any advise on how to fix hard steering? Is S model has it hard by factory setting?
@jasonking86713 жыл бұрын
I'm having the same issue with my 2006 Pontiac vibe, everything looks to be the same. Thanks and great video
@alanfrancis92253 жыл бұрын
Great video. My steering seems a little stiff at a certain point when left for a day. It’s like it is rubbing. May well be wear on the universal joint. No effect on movement of wheels and no play in link between steering and movement of wheels. Going to apply silicon grease to both lower universal joint and top joint on shaft and see what happens.
@nailarae36333 жыл бұрын
You in Spring Tx?? Houston?
@MohamedAhmed-cy6np3 жыл бұрын
I had same problem but it was only needs greasing on top shaft by goes in and out it moves when u want to adjust ur steering up/down so the shaft goes in and out that where u gonna grease that's all.
@MJ.4013 жыл бұрын
My 09 Dodge Nitro is making this sound, I'm trying to recreate that sound for the mechanics to hear, frickin car gets stage fright every time.
@DJREZN83 жыл бұрын
nice vid!! i just have one quention tho, i have a 2000 camry and from time to time the steering gets very stiff and then gets better and then very stiff again making it difficult to steer. i'm thinking this is the u joint also because i read in a forum that this could cause this. if this is the problem, my question is when i go to buy the new part, is it called the intermediate steering shaft? i looked online and it looks like the yolk in this vid but just wanted to make sure, thanks!!
@williamk98813 жыл бұрын
He doesn’t answer questions.
@marlsonfabrid60103 жыл бұрын
Sir is my corolla ee100 has the same location of u-joint or yoke?
@azwanabuselaiman60383 жыл бұрын
im facing the knocking sound when turning the steering and also my steering vibrate on uneven road. can this be the cause?
@fikilefikilezondo47913 жыл бұрын
Thanks for the DIY where can I buy the u- joint around roodeport or jhb
@rileyhayden99843 жыл бұрын
The music is louder than your voice
@leonshay42723 жыл бұрын
Hi, I have a 2010 Toyota Matrix and i had the same knocking noise when i would turn or brake, so then i bought a new lower steering shaft with new u joints, but after changing it it still makes the same knocking sound, any help please?
@danieluntalasco41423 жыл бұрын
Hello kabayan. Tanong ko lang po. I drive a 91 Pajero. When i turn the wheel to the left, smooth naman. But when i turn right, initially its smooth but then it hardens and feels like you hit the end in a quarter turn but if you keep turning it smoothens out until you lock it all the way. What could be the problem? Salamat!
@nosnibor8003 жыл бұрын
I am from the UK. I have a 2006 Corolla with a noisy rattle - I have been told it is from the intermediate steering shaft. My Toyota dealer wanted £300 !! for the new part, plus fitting. There does not seem to be an after market part available (in UK). Could you tell me the price of the part in the USA ? I have a friend in USA who could get it for me. Thanks in advance.
@autorepairdiywithsam45233 жыл бұрын
Hi Philip! Thanks for watching! The part, which is called Yoke Sub-Assy, costs $117.67 from www.toyotapartsdeal.com. The part number is 45209-02041. I don't know if that's what your Toyota Dealer in UK was talking about when they said intermediate shaft. If you go to www.toyotapartsdeal.com, they have intermediate shaft with part #45221-05011 listed different from the yoke sub-assembly. Intermediate shaft, which I believe, is called steering gear input shaft, costs $165.36. That's the part that connects the lower part of the yoke. In some other year models, the intermediate shaft includes the yoke and shaft together as one assembly. In my case, the one causing the clunking noise whenever I turn the steering wheel was the yoke.
@autorepairdiywithsam45233 жыл бұрын
And, if you do the service yourself, please don't forget to put bungee cords on the steering wheel, before you disconnect the parts to prevent damage to the spiral wires located in the steering column. This part of the process is extremely important.
@nosnibor8003 жыл бұрын
@@autorepairdiywithsam4523 Hi thanks, the part number is 45260-02031. I have definitely identified it as this part that needs to be replaced. If you adjust the steering wheel so that it is fully out, the rattle disappears. So it is the splines on the intermediate shaft that are worn causing the problem. I will check your link. Thanks
@autorepairdiywithsam45233 жыл бұрын
@@nosnibor800 Ok, you're welcome!
@jmdonasc3 жыл бұрын
omg. my car has a clacking noise whenever i drive. i almost changed the CV axel or the wheel bearing just to relize that the black plastic cone that covers it is stuck.
@autorepairdiywithsam45233 жыл бұрын
LOL It's good you realized sooner than later especially if you already bought your parts. It's going to be frustrating. You can return the parts though. When changing either the CV Axle or the wheel bearing, you'll surely at some point during the repair process to access the steering wheel, and voila you'll come to realize that it's just the plastic cover that's stuck and in direct contact with the steering shaft.