Mine makes an horrible grinding noise when I 1st turn it on?
@heikoofalltrades22678 күн бұрын
@@darrenhayward4340 yes, my engraver as well. It is a bad but cheap solution to home the laser with a mecanical stop. So the motor makes a lot of steps to reach the end position. If the laser is close to home the laser will ram into the mechanical end but the motor wants to do its steps. That the mechanical sound. Not the best thing but the motors are weak. My engraver works a wile now without error. In a few days a publish a test video of a big engraver. Maybe this is someting for you. This one as end position switches :)
@darrenhayward43408 күн бұрын
@@heikoofalltrades2267so is the noise normal for this cheap engraver when you first switch it on
@GurgaonFire15 күн бұрын
Hello how are you doing man
@heikoofalltrades226715 күн бұрын
Hey, busy these days 😁. Working on a laser cutter review. Hope we see us around here.
@GurgaonFire13 күн бұрын
@@heikoofalltrades2267 can you drop any of your social media here for better conversation
@GurgaonFire12 күн бұрын
@@heikoofalltrades2267 Hello man
@ThomasJames-zo2nqАй бұрын
👍👍👍👍👍👍
@ArojoJoshuaАй бұрын
Amazing to see waste turned into something new🎉
@zeroeaseАй бұрын
Well done!I bought the acmer p1 s on amazon and I love the precision it gives me. And the price was very cheap.
@heikoofalltrades2267Ай бұрын
Yes, this little things are very handy and easy to wirk with. I started testing a bug machine but at that point you have to deal with software and layers and stuff. I like the little machine a lot.
@OluyemiPrecious-vj3kdАй бұрын
Heiko of all trade ❤
@JeffJames-ke9cyАй бұрын
What a nice work shop❤❤
@MakyomaАй бұрын
Well Done man 👍🏽 👍🏽👍🏽
@SamuelJosh-zo5dg2 ай бұрын
😮😮😮😮
@nonsibi10872 ай бұрын
I don't get what the point of it is...
@AndrewClifford-pz6sh2 ай бұрын
Love this 😊
@WealthMide2 ай бұрын
Awesome 💯
@Emilyshmider2 ай бұрын
Lovely 😮
@JamesMide2 ай бұрын
Can you list out the name of equipment and machine used in the crafting process
@TimothyClark-wq4id2 ай бұрын
Nice fitting 😊
@ClarkTimothy-vi8my2 ай бұрын
👍👍👍👍👍
@MideJames-io7jj2 ай бұрын
Is it every glue that works for wood???
@RichardJames-om9cz2 ай бұрын
Wow amazing Your tutoring is cool
@heikoofalltrades22672 ай бұрын
Thx😁
@JamesSmith-pe6uf2 ай бұрын
I need more understanding about the measurements can you help??
@heikoofalltrades22672 ай бұрын
What exactly you want to know. Surface is 60cm by 120cm (2x4 feet). The hight should be adjustet to your other work areas so that you can place long worksurfaces or let the work bench serve as support or outfeet table.
@maryseidl80812 ай бұрын
Great and, above all, detailed explanation of how to build the workbench. I like it very much.   Feedback
@OlaoluwayimikaBada2 ай бұрын
i think i would watch this again for better understanding Lols 🤗🤗
@TimothyTimileyin-dt9uu2 ай бұрын
wow amazing 🥰
@collins082 ай бұрын
wow 🥰🥰
@homemadesales2 ай бұрын
Love it 😅👍🏼👍🏼👍🏼
@DavidImole-nc9nb2 ай бұрын
😍😍😍😍🥰
@DamiladeDaniel2 ай бұрын
wow amazing
@KrogunDK2 ай бұрын
I think you have a beautiful workbench. It is unique and you have made some cool modifications to it. One question though. You mentioned that the bench matches the height of your table saw. Haven't you changed the height so that is not the case anymore?
@heikoofalltrades22672 ай бұрын
At first, thank you 😁. No, by replacing the casters with wooden legs I shorted the legs by 18mm to compensate for the extra beef on the surface. The retractable casters are lower than the old ones.
@wyominghome48573 ай бұрын
I bought a whiskey barrel to use as a rain barrel outside. It's not particularly old, just discarded from the distillery. It has 3 one-inch holes in the side for venting. What's the best way to stopper those hole to make it water tight?
@heikoofalltrades22673 ай бұрын
I would take a oak - if this is the wood of the barrel - branch and cut it to fit the holes. It will look like a plug from the distillery.
@kthschsslr3 ай бұрын
Even on the narrow inlay, one could drive screws and use a cut off wheel to cut the screw head off below the finished pour height. No need to drive from below.
@user-lp2lg7ij6y4 ай бұрын
Nice video❤
@homemadesales4 ай бұрын
Love it mate ☀️☀️ would like to have one ☝️
@resitcevirgen78684 ай бұрын
Hello Heiko, Many thanks for very nice video :) I would like to cast aluminum on letter engraved OSB. Which thickness and depth do you recommend?
@heikoofalltrades22674 ай бұрын
Uh, I have no Idea when it comes to aluminium. Aluminium melts at more than 600°C, tin round 300°C. You have to test if it buns the wood or sets the OSB or the glue of the OSB on fire. I would start with a 10-15mm / 0,5" cut into the OSB. Be careful as the glue of the OSB might produce gas and kicks out the molten metal.
@OmotoyosiOpeyemi-hz6rl4 ай бұрын
Very nice video ❤
@ozoln4 ай бұрын
You have blocked viewing videos on other sites. Remove the ban so that views on advertising sites are counted.
@raymondlands40004 ай бұрын
❤
@Smarthealthsprints4 ай бұрын
Inspired 😊
@user-ew1ku5sh9u4 ай бұрын
Nice work
@maryseidl80814 ай бұрын
❤I love it. Great work 💪💪💪
@papatinpan4 ай бұрын
NEVER!! 3D Printing NEVER!! What's the point of learning the skills if you aren't willing to put the time in?! This is not Making it's Lazy.
@johnvodopija17435 ай бұрын
Good on you for reusing materials. Cheers 👍😎🇦🇺
@heikoofalltrades22675 ай бұрын
Thx. I thing it is a kind of "Makers responsibility"
@user-yj3uf8nx5r5 ай бұрын
link? why no freaking link?
@heikoofalltrades22675 ай бұрын
I put one into the video discription...
@michaelbeyer76135 ай бұрын
A link to the laser was very helpful, i think…
@heikoofalltrades22675 ай бұрын
Sorry, I add one...
@homemadesales5 ай бұрын
Great one 👍🏼 also good to laser handy covers ?
@heikoofalltrades22675 ай бұрын
😁 I never tryed that. If they are made from silucone I think it will not work. I engraved leather, that works well!
@harleydu37645 ай бұрын
Interessantes Teil. Wäre schön, wenn du den Laser verlinken würdest.
@adrimathlener80085 ай бұрын
What type/brand is the laser engraver?
@heikoofalltrades22675 ай бұрын
I bought the HomdMarket K4 but there is a family of products with the same data. I thing they mire ir les comming from the same factory. Look for mini laser engraver.
@willmartin-5 ай бұрын
Very cool. I would get it. Thank you
@prestonian10665 ай бұрын
how do you manage to melt tin in a tin can without melting the tin can?
@heikoofalltrades22675 ай бұрын
😁The tin can is not made from tin. It is a soft steel. But if you have doubts, you can take a stainless steel or aluminium cooking pot to melt it.
@biankaschmitt41435 ай бұрын
👍🏻
@michaelhyland92166 ай бұрын
Put a bevel on the inside of the piece so the metal is wider at the bottom than the top.
@heikoofalltrades22676 ай бұрын
Yes, a undercut, very good as well but the screws working as well very nice and they are easy to install. Works on my table with history since a year with no moving metal...