EVERLOST

Пікірлер

@theoneghost2 8 күн бұрын

how do you start the car at the beginning?

@MR.EVERLOST 8 күн бұрын

@@theoneghost2 i make a mod for that. Check my videos and patreon. Still need to fix one thing but as you can see it can work well 😄

@trungtrung9739 11 күн бұрын

my brake pedal is only about 20% help me🥲🥲🥲

@MR.EVERLOST 11 күн бұрын

@@trungtrung9739 what you mean? It works in 20% range only? Did you calibrate them in DiView as in this video with Excel calculator?

@trungtrung9739 11 күн бұрын

@@MR.EVERLOST The throttle pedal is good but I press the brake pedal at maximum about 20%. I also put a minus sign before the values. I take the min value minus the max value then divide by 2 like you. I bought "simjackpro" 3 days ago. I also tried "simjack control" but the software does not accept the pedal.😒😒😒

@MR.EVERLOST 11 күн бұрын

@@trungtrung9739 write to me on IG, MR.EVERLOST

@MR.EVERLOST 11 күн бұрын

@@trungtrung9739 sometimes people make simple match mistake which is A + B / 2 instead of (A + B) / 2

@trungtrung9739 10 күн бұрын

@@MR.EVERLOST can't install DIVIEW i switch to "freejoy" and then i plug simjack pedal into computer. "other device" recognizes my device as "freejoy" instead of simjack even DIVIEW recognizes freejoy in setting ???. - ACC game before installing freejoy recognizes pedal, after installing it doesn't recognize pedal😂😂😂 -how to make the computer understand simjack like before

@Shari_Tejp 12 күн бұрын

hey, can you tell me which buttons and those button covers are you using exactly? do they have that quality feel like kmp ones? i can't find those anywhere. Thanks :D

@MR.EVERLOST 12 күн бұрын

@@Shari_Tejp they are super soft, I don’t like this feeling too much but they just looks closer to one from KMP 🤷🏻‍♂️ a.aliexpress.com/_Exw9HRZ

@Bodays 16 күн бұрын

Hi Everlost, Really like your videos and wanted to share an hydraulic mod I bought from a regular guy which is really good: kzfaq.info/get/bejne/gpp7ipqbsp3biok.htmlsi=4gA6n4vXfjJ8HU1R

@moceasar671 19 күн бұрын

Hey, what screw sizes did you use for the 3d printed hub?

@MR.EVERLOST 19 күн бұрын

@@moceasar671 m5 or m6 don’t remember. Project is on patreon so you can check it before/after printing. I’m out of home so can’t check it right now.

@fnar8965 20 күн бұрын

What paint did you use to paint?

@AqilTheCarGuyandmore7513 21 күн бұрын

Im first here woohoo but that sound tho 🔥🔥🔥🗿

@KarolKrawczyk-x8w 23 күн бұрын

Siema, ten srebrny plate do którego przykręciłes pedały to jest ten z zestawu simjack? Czy kupowałeś go gdzie indziej lub wycinałeś?

@MR.EVERLOST 23 күн бұрын

@@KarolKrawczyk-x8w jeśli chodzi ci o podstawę to kolega mi wycinał. Jeżeli chodzi o fronty pedałow, w sumie też wycinał kolega i ja zaginałem 😅 nakładki mam jeszcze 1 kpl

@KarolKrawczyk-x8w 23 күн бұрын

@@MR.EVERLOST ciekawy jestem ile by mi wyszło takie wycięcie bo podstawa z aliexpresu 320zl +

@MR.EVERLOST 23 күн бұрын

@@KarolKrawczyk-x8w jak masz projekt to wytniesz zawsze z 50zl taniej niż gdzieś kupisz. Pytanie czy jest to warte twojego czasu. Popatrz czy na OLX jeszcze są od Piotra 😅

@KarolKrawczyk-x8w 23 күн бұрын

@@MR.EVERLOST masz może jakiś link kolego? Wydaje mi się że jak wpisze simjack plate piotr to mi nie znajdzie :D

@MR.EVERLOST 23 күн бұрын

@@KarolKrawczyk-x8w pisz na fb do Piotr Sk

@moceasar671 24 күн бұрын

Hi, did you upload the hub STL anywhere?

@MR.EVERLOST 24 күн бұрын

@@moceasar671 www.patreon.com/posts/97965190

@MR.EVERLOST 24 күн бұрын

On my Patreon there is more for VRS like front mounting from my latest videos 🙌

@moceasar671 24 күн бұрын

@@MR.EVERLOST Thanks for the reply, much appreciated

@user-uf1eu2lt3w 26 күн бұрын

how did you create the texture?

@MR.EVERLOST 26 күн бұрын

@@user-uf1eu2lt3w I manually modeled this texture in the 3D software 😬

@GrTheodor Ай бұрын

Can I have design for 3D printer;

@MR.EVERLOST Ай бұрын

This model is no longer available as it has been replaced by the V3 version - link in the video description. Unfortunately, the V3 version will not be available in digital distribution. In the future, other button boxes should appear on my Patreon. If you are interested in this specific one, you can find a similar model on Cults3D or eBay - I have decided to sell one of my two units.

@kristaps2010 Ай бұрын

good cockpit view/set up, thanks for sharing

@user-tg5su9bf2f Ай бұрын

I'm really looking forward to the latest update, I've been beta testing it and there's a lot of great stuff coming, but best of all are the new physics.

@thijsazerty692 Ай бұрын

There are more GT3 cars coming (Audi) but on the other hand: why the F would we need more of those? We need more people in the non GT3 lobbies. AMS2 has lots of other good classes. Learn to drive stick (heel toe) for example...

@MR.EVERLOST Ай бұрын

I would like to be able to recreate historical races with a full grid 🥹 I will definitely want to improve my driving techniques, but in my own time. I play very rarely and irregularly, but just driving and DIY brings me a lot of joy.

@Jullzman Ай бұрын

Thanks for the guide! I have an issue where my brake and clutch work beautifully but the accelerator do all sorts of weirds things - The input values jitter in the 1000's, and grounding it makes it accelerate 100% input. Would this signify a faulty load cell on the accelerator, or faulty simjack box/cable usb?

@MR.EVERLOST Ай бұрын

Could be LC or controller. Stock usb cable is bad quality so anyway it’s good to get something shielded and better. If it’s not helps ask supplier. They sometimes send LC or controller to customers.

@Jullzman Ай бұрын

@@MR.EVERLOST Thank you, will let you know what happens

@MR.EVERLOST Ай бұрын

@@Jullzman I talk with the manufacturer and if you place aluminium enclosure somewhere on your pedal plate mounting you should got same effect. I just followed ideas from Heusinkveld manuals 🤷🏻‍♂️

@Jullzman Ай бұрын

@@MR.EVERLOST Are you suggesting this is how to fix it, or this is how the problem happens?

@MR.EVERLOST Ай бұрын

@@Jullzman I just say this two ways make same thing. You don’t have to solder it, you can put controller on the metal plate for pedal mounting and check if it help with your problems. If so, you can keep controller on the metal plate or solder gnd cable as I do. Also read video description 😀

@VladKov36 2 ай бұрын

hey, is there any chance you have the spec for the Ultimate's throttle spring?

@MR.EVERLOST 2 ай бұрын

No, don’t have it 😔

@MikeJones-wq4qv 2 ай бұрын

Nice build man. I would try to print it without those supports, there are no big overhangs, it should work I guess.

@MR.EVERLOST 2 ай бұрын

Im printing without cooling so supports helps a lot here 👌

@Carm4rr 2 ай бұрын

yo can u send screenshot of ur engine drop settings? i need help

@freeman1827 2 ай бұрын

Teraz już wiem po co była Ci potrzebna przedłużka do vrs

@MR.EVERLOST 2 ай бұрын

Ogólnie chciałem, żeby się wygodniej wsiadało 😀 ale w sumie nie wiele to zmienia. W każdym razie odległość kierownicy od reszty jest teraz idealna, więc bądź co bądź zwycięstwo 😅

@gregpruitt1647 2 ай бұрын

When removed the brass bushings, 2 of them broke. So, I had to replace all 6 bushings with flange bearings. The bearings are a much better solution over the bushings. So...

@MR.EVERLOST 2 ай бұрын

Like I said, quality of stock bushing is bad. When you play a bit on wobbling pedals you could make it weaker, that’s why they was broken. Bearings is good move if center hole diameter is the same diameter as tightening screw.

@LurizanFian 2 ай бұрын

noice

@francisjoelcastilloromero5104 2 ай бұрын

harias otro para venderlo ?

@MR.EVERLOST 2 ай бұрын

This was the last one. Love this project but it’s too time consuming for me. I’m just simple hobbyst 😀 Write me on PM /IG or FB, I’ll try to help you.

@oversober-re2kj 2 ай бұрын

ride on me

@gregpruitt1647 2 ай бұрын

On my pedal set, I replaced the much too soft elastemors with Hawkeng Mid-soft and replaced the spring with an car engine valve spring. Made the perfect match.

@gregpruitt1647 2 ай бұрын

This pedal design sets the pedals at a nearly flat angle. With the pedal plate set low, it soon becomes uncomfortable for your ankles. I found that elevating the pedal plate makes the flat angle much easier to manage.

@gregpruitt1647 2 ай бұрын

I purchased Fanatic's Clubsport v3 pedals when they first came out. The Clubsports pressure goes directly to the load call. I tried everything to get a better feel for the brake, but enter got it right. I just ordered the SimJack Pro set with its spring/elastomer design. SimJacks take on the Neusinkveld design loadcell force transfer, is much better idea. This has improved my control of the brake by leaps and bounds, and at a much... much lower price.

@MR.EVERLOST 2 ай бұрын

For this price it’s very good choice. After installing HE elastomer kit and preload clone spring from the Ultimates they are perfect for me 😉

@sam1kon 2 ай бұрын

can you just put them on the floor, or you must have a cockpit

@MR.EVERLOST 2 ай бұрын

It require hard mounting. Even stock brake will be too hard to keep it on the floor

@Clay_Regazzoni 2 ай бұрын

Hi bro! Is it ok when I do a short video with the mod? Of course I will link and credit everything to you. But still think it's appropriate to ask first.

@MR.EVERLOST 2 ай бұрын

Sure :) with credits sounds great 😀

@Clay_Regazzoni 2 ай бұрын

This is a genius mod, and it takes about 30 to 60 seconds per car (which also shows how clean and lean it is made). I totally love it ❤️🍀 PS: I deleted the clutch section in the lua file, which let me shift without problems now.

@MR.EVERLOST 2 ай бұрын

Clutch could need „<„ „>” signs adjustments depends on inverted pedals or not. Version 2.1 is better for cars with steering wheel shifters and 2.2 probably for H gearboxes. Actually don’t have to much time to work on it but maybe when finish my other project will back to it again.

@willemvanesdonk8577 2 ай бұрын

great job, just ordered the parts :)

@MR.EVERLOST 2 ай бұрын

Thank you 😀 yesterday I watched Philips hue and govee lamp configurations and don’t know, this looks better for me and is a lot cheaper…

@willemvanesdonk8577 2 ай бұрын

I will always go for the cheap and home made 😁💪👍👊🤘

@willemvanesdonk8577 2 ай бұрын

@@MR.EVERLOST Hi,got one question can i do 2 ledstrips of 60 and 1 of 40 or do i have to adjust the sketch then?

@MR.EVERLOST 2 ай бұрын

@@willemvanesdonk8577 this power supply can handle safety 180leds, so you can use less LEDs but you need to know how to connect data cable because it’s one direction signal. You also need to know that more LEDs in sketch = more blocks on the screen to adjust. It could be more time consuming to adjust it to specific car 😀

@willemvanesdonk8577 2 ай бұрын

@@MR.EVERLOST ok thanks for the info👍

@lechatfou2587 2 ай бұрын

Hi, i just instaled it on a car but the thing is i can't shift when i press the clutch, but when i don't touch it i can? can you help me please?

@MR.EVERLOST 2 ай бұрын

Hi. Try to remove two IF functions related to clutch behaviour. You will find it in „script.lua”, „- other” section.

@MR.EVERLOST 2 ай бұрын

I updated resources, you can download it again and check if the problem persists. Current version is now 2.1.

@Clay_Regazzoni 2 ай бұрын

The shift problem happened to me aswell. Gonna try to solve it as recommended.

@MR.EVERLOST 2 ай бұрын

@@Clay_Regazzoni I try to add hotfix of it today. Ian fix it by removing part responsible for this issue and sent me corrected code. It was probably part which move gear to N in some conditions.

@MR.EVERLOST 2 ай бұрын

@@Clay_Regazzoni Done. Try to download version v2.2 and let us know how it works now 👀

@ZenMotionSim 2 ай бұрын

👌🫡👊

@mgbeatz9260 2 ай бұрын

Jak zwykle świetna robota 👌👌💪

@Camolus84 2 ай бұрын

Awesome 😮😊 thx for my next project 🤭🤫😅

@user-tg5su9bf2f 2 ай бұрын

If I may ask, how are you getting that texture on the top side of your 3d prints? It looks as if you're using fuzzy skin on the top surface.

@MR.EVERLOST 2 ай бұрын

Textured paint

@user-tg5su9bf2f 2 ай бұрын

@@MR.EVERLOST Sweet, thanks for the reply 👍

@user-nz4oq9ck3e 3 ай бұрын

hello i have a little problem with the ignition and start mod. Most of the car mods i use is already idleing when i go ingame can i do something so the cars is off when i load in or is it just gonna have to be like that

@MR.EVERLOST 3 ай бұрын

It should be off after installing start engine mod. Did you use first version or second? Don’t know why some people have problems with version 2.0. If it 2.0 try 1.0.

@user-nz4oq9ck3e 3 ай бұрын

@@MR.EVERLOST i tried but it didn't help

@MR.EVERLOST 3 ай бұрын

@@user-nz4oq9ck3e so if v1.0 don’t work too, the problem is on the car side or AC or you missed something. You need to install both scripts, sound and script lua as in the instructional video, and remove old data acd. You may check the scripts - I don’t remember but if there is something connected to rpm - it should have idle rpm of your car. Default was 900 idle rpm because I made it for Porsche 2016 GT3 R. If you install it to this car it should work instantly. Don’t have access to computer now so can’t check it for you. You can write to me on FB or IG or Patreon.

@guyom3780 3 ай бұрын

thankssssssss

@TechBabu801 3 ай бұрын

How do you connect it to the pc as i saw there is no wire connected to the pc

@MR.EVERLOST 3 ай бұрын

Hi. 5:56 - there is cable connector on the bottom of the enclosure 😬 maybe one day I will try with wireless but for now all my projects was cable connection

@TechBabu801 3 ай бұрын

@@MR.EVERLOST No I mean do you connect it to pc directly by a USB or u connect it to your wheel base if so the how ?

@MR.EVERLOST 2 ай бұрын

@@TechBabu801 no, I connect it directly to PC. VRS don’t have communication connection like BT or USB

@user-xj9wo7nx7i 3 ай бұрын

спасибо за видео! но у меня вопрос, как вы поставили минус перед цифрами!??

@MR.EVERLOST 2 ай бұрын

Minus was copied and pasted 😀

@ailtonalmeidaz 3 ай бұрын

nice view

@mgbeatz9260 3 ай бұрын

Ciśniesz ciszniesz😅😅

@MR.EVERLOST 3 ай бұрын

Coś pięknego wrócić do ACC. Teraz tylko wyczuć wszystko i setupy poogarniać 😅

@jackheywood6200 3 ай бұрын

That button box 👌Any chance of posting the 3d print files for the enclosure? I'm clueless with this shit 😅

@MR.EVERLOST 3 ай бұрын

I've thought about it many times, but I spoke with someone who measured this box, and we agreed that it's too valuable of a project to just let it go around on the internet... 😬🤷🏻‍♂️

@MR.EVERLOST 3 ай бұрын

But you can download similar to my v2 version from the cults 😀

@arranmc182 3 ай бұрын

Very nice great job 👍

@f.r.4887 3 ай бұрын

Great Job.Looks Amazing👍

@willemvanesdonk8577 3 ай бұрын

Nice my friend very nice, Are the stl files available by any chance?

@MR.EVERLOST 3 ай бұрын

I've thought about it many times, but I spoke with someone who measured this box, and we agreed that it's too valuable of a project to just let it go around on the internet... 😬🤷🏻‍♂️

@willemvanesdonk8577 3 ай бұрын

@@MR.EVERLOST no problem, love the projects and if you don't ask you won't know anything :) Thanks.

@Tuganotube Ай бұрын

Great job!

@Liamoxocars 3 ай бұрын

Mate this is awesome! Deffo going to try it out, awesome work! I actually have a request for you to make something... basically, I want a launch control app that will play 2-step sounds at a set RPM. For example, when pressing fully on the throttle with clutch in, it will start playing 2-step sounds. And make it so that we can use our own 2-step audio recordings, making them interchangeable. It's something that will totally change Assetto Corsa for the better! It would be great if it could all be implemented into an app within Assetto Corsa. I have been after something like this for years, and a lot of other people want it too! :)

@MR.EVERLOST 3 ай бұрын

With code provided In anti lag mod you should make it easy 😀 all crucial formulas is there. Now it’s just adjusting for own purposes. But if we talking about AC app - I would like to have it like that but I don’t know how to build them. I more 3D designer than app or scrip designer. Making all these mods working like that, I mean ignition, stall, start engine and anti lag took me lots of hours 🥲

@Liamoxocars 3 ай бұрын

@@MR.EVERLOST I shall give it a try! I would be willing to pay if you made one but yeah I shall try myself :) Keep up the great work man 😁

@lmfixit 3 ай бұрын

i thought thats dragonball z music :D

@JhnyBravos 3 ай бұрын

Omg amazing loving what the community can create

@RcSimracing 3 ай бұрын

C'est vraiment intéressant, je travaille aussi sur l'antilag mais directement dans le sfx.

@MR.EVERLOST 3 ай бұрын

It’s probably better way if you can make it directly in SFX but maybe this script could be helpful to achieve anti-lag behavior. I’m pretty sure it is possible to play this sounds from sound bank instead of mp3 files from extension. Otherwise is also nice that anybody can use custom mp3 files just swapping them in extension folder.

@RcSimracing 3 ай бұрын

Ma façon de faire est meilleure mais la tienne est activable et desactivable. Pas moi. Et moi je dois recréer le son moteur complet de la voiture alors que toi simplement l'antilag donc à ce niveau c'est mieux pour toi. Un conseil que je fais, l'antilag consiste à garder la pression du turbo en charge. Je modifie le turbo lag down dans engine.ini pour qu'il reste en charge. Si tu peux faire ça dans ton script, ca serait génial. Ton turbo resterait en charge comme en vraie

@MR.EVERLOST 3 ай бұрын

@@RcSimracing yeah, I know that’s why I called it „fake” 😅but script keeps the car on specific rpm range truly

@RcSimracing 3 ай бұрын

@@MR.EVERLOST c'est une très bonne idée ce que tu as fait. Il faut juste trouver comment l'améliorer. Je suis sûr que c'est faisable avec un .lua d'intégrer le lag du turbo du fichier engine.ini

@KingGemini530 3 ай бұрын

track?

@MR.EVERLOST 3 ай бұрын

Prague

Ең жақсы KZfaq

Пікірлер