5 жыл бұрын
7 жыл бұрын
Пікірлер
@PipoZaro 5 жыл бұрын
Nice job and a great guide for my weekend project. Best wishes and regards from Copiapo, Chile
@jonathan8090 5 жыл бұрын
Nice video, do you think you can share with us the measures for make that mini press using those washers and the bolt ? Also i couldnt understand exactly why the bearing.. I dont have easy access to that kind of bearing, can I skip it in any case ? I have those bushings and I ll do that replacement this sunday and Im getting ready to it hehe
@simonskeloggs4811 5 жыл бұрын
Jonathan A. Zuñiga O. As long as you have one washer (or socket) 52mm (the same size as the bush) and another washer (or socket) bigger than 52mm on the other side you will be fine. The bearing was used as it is 52mm (the same size as the bush) and makes it easier to press in as the bearing rotates so reduced friction. The other washers were used to reduce the internal hole size down to the same diameter as the bolt. Hope that makes sense and good luck !
@christianotin1218 5 жыл бұрын
@@simonskeloggs4811 Thanks for taking your time to help. I ll do that !. one last question, My jimny model (2007) uses a bushin with no holes like your bushins, this mean I can put it in any way right ? . Thanks in advance
@simonskeloggs4811 5 жыл бұрын
Jonathan Zuñiga Yes, that’s right. The solid bushes can go in any way. Just remember to freeze them!
@marcpitkeathly9434 Жыл бұрын
What size bolts go threw please
@daniloraynor8043 6 жыл бұрын
grateful from chile!
@simonskeloggs4811 5 жыл бұрын
Danilo Raynor If there are any Jimny fixes you would like to see- please let me know!
@jrsalibay3 6 жыл бұрын
Certified rockstar matey
@Warrior8bit 6 жыл бұрын
Looks awesome! You need a drone for next time ;)