A Backyard Budget Method of replacing Suspension Bushes.
Пікірлер: 8
@PipoZaro5 жыл бұрын
Nice job and a great guide for my weekend project. Best wishes and regards from Copiapo, Chile
@daniloraynor80436 жыл бұрын
grateful from chile!
@simonskeloggs48115 жыл бұрын
Danilo Raynor If there are any Jimny fixes you would like to see- please let me know!
@jonathan80905 жыл бұрын
Nice video, do you think you can share with us the measures for make that mini press using those washers and the bolt ? Also i couldnt understand exactly why the bearing.. I dont have easy access to that kind of bearing, can I skip it in any case ? I have those bushings and I ll do that replacement this sunday and Im getting ready to it hehe
@simonskeloggs48115 жыл бұрын
Jonathan A. Zuñiga O. As long as you have one washer (or socket) 52mm (the same size as the bush) and another washer (or socket) bigger than 52mm on the other side you will be fine. The bearing was used as it is 52mm (the same size as the bush) and makes it easier to press in as the bearing rotates so reduced friction. The other washers were used to reduce the internal hole size down to the same diameter as the bolt. Hope that makes sense and good luck !
@christianotin12185 жыл бұрын
@@simonskeloggs4811 Thanks for taking your time to help. I ll do that !. one last question, My jimny model (2007) uses a bushin with no holes like your bushins, this mean I can put it in any way right ? . Thanks in advance
@simonskeloggs48115 жыл бұрын
Jonathan Zuñiga Yes, that’s right. The solid bushes can go in any way. Just remember to freeze them!