The hardest part is separating the 2 parts from new. They actually come apart easily but it feels like something could break. My one failed after 18 months but took it back to TLC and they gave me a new one no problem.
@Cablesmith10 күн бұрын
Yea you’re spot on, they do feel like they’re going to snap. Remember being wary at first
@Tracy-s3q11 күн бұрын
Hey just about to have a summer house installed . What would be the typical cost for something like this please. Parts labour etc thank you nd great work 😊
@Cablesmith10 күн бұрын
I typically charge around £1000-1300 for the majority, but depending what they want, I’ve done one for around £3500 before now 🤯
@Tracy-s3q10 күн бұрын
@@Cablesmith thank you for your reply 😁
@Sparks1Plumbers011 күн бұрын
You numpty... 🙄 Could have at least sprayed it Red ... eh? 😉 Would have started a new 'Trend' amongst your fellow youtubers 😂😂😂
@MrEditsCinema13 күн бұрын
I cant have the armoured cable running directly to my consumer unit as my neighbours property gets in the way (4 in a block / maisonette) Can the armoured cable be run into my bedroom then threw the wall again into my hall where the consumer unit is?
@Cablesmith13 күн бұрын
@@MrEditsCinema there’s a couple ways it can be done. Usually best to use twin and earth cable inside the house, buried in wall, trunking, through the loft etc whatever works best. Then convert to armoured once it gets external
@numatic12stan13 күн бұрын
(19:50) It is a sounder bacon base by the way 😃
@Ste202314 күн бұрын
Nice Lamp at a north west stadium.🤔
@Waynesworldofgaming14 күн бұрын
😂 5hrs to put up an outside light light 🤣
@Cablesmith14 күн бұрын
😂😂😂
@Standupuk16 күн бұрын
Looking for hand outs
@Cablesmith16 күн бұрын
@@Standupuk what for? I’ll see what I can do for you
@Standupuk16 күн бұрын
@@Cablesmith no, not for me sparky, for you, I have a old drill somewhere pall if you want it.
@Cablesmith16 күн бұрын
@@Standupuk 😂😂😂 I’m good thanks matey. appreciate it tho
@Standupuk16 күн бұрын
@@Cablesmith ok, keep doing the good work.
@Cablesmith16 күн бұрын
@@Standupuk cheers bud 👌🏼
@corgar393017 күн бұрын
there was no risk in that because the electricity was off, still hats off to you for working hard
@Cablesmith17 күн бұрын
@@corgar3930 thanks matey 👌🏼
@corgar393016 күн бұрын
@@Cablesmith no worries but next time don't advertise it like it's dangerous or something
@Cablesmith16 күн бұрын
@@corgar3930 it wasn’t, it’s a joke, that’s how electricians check
@cag928417 күн бұрын
Obviously, he can't afford a drill, he should ask his uncle maybe he get one cheaper 😂
@Cablesmith17 күн бұрын
@@cag9284 which uncle? I’ll ring him now
@cag928416 күн бұрын
@@Cablesmith 🤣. .. keep up the good work bro.
@adriatikkrasniqi145318 күн бұрын
Long time no see mate you don’t use any more SDS drill are this stepladder 🪜 safe 👍
@Cablesmith18 күн бұрын
@@adriatikkrasniqi1453 no more SDS mate, taking it back to the old school 😂 Ladders safe but doesn’t feel safe. Only use occasionally
@Chatterisdotbiz18 күн бұрын
Brace and bit lol, gotta be on a day rate 😊
@Cablesmith18 күн бұрын
@@Chatterisdotbiz 😂😂😂
@roydowling254218 күн бұрын
Welcome back, back again
@Cablesmith18 күн бұрын
@@roydowling2542 how do Roy
@Rossisearle19 күн бұрын
Great light.. I done few lately and customer have been so happy with how much light they got..
@Cablesmith19 күн бұрын
@@Rossisearle I’ve tried all sorts, but have stuck with ansell for any lights now. Never had any issues
@cag928423 күн бұрын
Don't these sockets require a CPC fly lead to the back box? I've used them, I kinda like them.
@Cablesmith23 күн бұрын
@@cag9284 this one required it, because the back box didn’t have any fixed lugs. tbh, this was the first and last time I used these sockets
@taze_ray791fn524 күн бұрын
Do you think you could come and rewire my summer house please
@Cablesmith23 күн бұрын
@@taze_ray791fn5 depending on your location, I certainly could.
@morninglobbyenjoyerАй бұрын
whats the risk of fire with this?
@CablesmithАй бұрын
with what? The summer house itself or the wiring?
@morninglobbyenjoyerАй бұрын
@@Cablesmith Wiring in a summer house, is there any risk of fire? I'm asking cause I'll be moving my PC into a summer house and the electricals will be done DIY, so I don't want my stuff to burn cause of an electrical fire
@CablesmithАй бұрын
@@morninglobbyenjoyer I suppose there’s always a small risk of an electrical fire, but no more than anywhere else. Everything is protected by RCD’s, tested etc. shouldn’t have any issues
@morninglobbyenjoyerАй бұрын
@@Cablesmith Ok great thanks. Just was worrying wood would make it more susceptible to fires but I'll get it checked by an electrician anyway.
@CablesmithАй бұрын
@@morninglobbyenjoyer I mean if there was a fire, obviously it would be much worse. But an electrical fault causing the fire isn’t any more likely than anywhere in your house really.
@joejoejoejoejoejoejАй бұрын
Would four(4) been better ; considering the size of room ❤
@CablesmithАй бұрын
Me personally yea I’d have 4 but that’s what they wanted in this case.
@joejoejoejoejoejoejАй бұрын
@@Cablesmith That room gave me the creeps whilst watching video I hope you didn’t experience anything weird and spooky
@CablesmithАй бұрын
@@joejoejoejoejoejoej I can’t really remember it much tbh 😂 but I remember thinking what’s the point of 2 downlights 😂
@brianoneill350Ай бұрын
Good video, nice tidy job. Extra box for documents great idea.
@CablesmithАй бұрын
Thanks mate. Appreciate you watching
@JRCElectricalАй бұрын
O hi Sean welcome back
@CablesmithАй бұрын
Hi Jack
@metrotechguru5863Ай бұрын
Looks like an excellent product, mate. Well constructed with really good instructions. I might have to give this one a go. Cheers.
@CablesmithАй бұрын
Thanks mate appreciate the view 👌🏼
@raywelshmanАй бұрын
Hi again young Sean, I hope the reason you don't post many videos is because you have loads of work? This one is very interesting matey, I will have a look at the info on the camera later. Regards from Ray the old sod from North Wales.
@CablesmithАй бұрын
Hi mate, partly because I’m busy yea, partly because I just haven’t bothered and choose an early finish over filming 😂
@thetruth6693Ай бұрын
The legend is back! One of the few real ones left 🎉
@CablesmithАй бұрын
Cheers bud, thanks for watching
@Sparks1Plumbers0Ай бұрын
And he's back... 'ish! 😮 Where you been m8? Practising your presenting skills for your new job on QVC 😂. Anyway, get back on the tools and leave this s#it to the likes of efffffffffffix and their shonky product promotions 🙄 😉😉
@CablesmithАй бұрын
😂😂 don’t think I’ll get the job still. I’ll try mate, just never find time to film for some reason recently.
@johncoe530Ай бұрын
Good to see you back Sean. Camera looks very easy to setup.
Seriously, very well put together, and you got to the point quickly and explained lots of stuff. GREAT VIDEO!!!
@Cablesmith2 ай бұрын
Thank you mate 👌🏼 genuinely appreciate that
@paul1962uk2 ай бұрын
Wish you'd shown how you managed to get fixings on those concrete sections
@Cablesmith2 ай бұрын
I thought I did? Red plugs and screws plus some grip fill
@paul1962uk2 ай бұрын
Did you get much breakage when you drilled for the plugs?, am thinking of doing something similar
@Cablesmith2 ай бұрын
@@paul1962uk not that I can remember. I have had some blow out on a really old garage. You just seem to hit the rebar sometimes, just end up going in on a steep angle to avoid coming close to going right through.
@Manu-Official3 ай бұрын
<-------- Smirks in Audi without variable size adaptive cup holders.
@catnlilynsteve3 ай бұрын
I build these and plugging the panels voids the customers warranty on those panels 👍🏼
@Cablesmith3 ай бұрын
Never knew that, I’ll mention it to customers next time. Out of curiosity tho, what would typically be a warranty claim on one of these?
@MithileshMuraven3 ай бұрын
Hi, can you tell me why i get integrity faults?😊
@Cablesmith3 ай бұрын
The panel probably just needs resetting in engineer mode most likely.
@MithileshMuraven3 ай бұрын
@@Cablesmith i will check this
@MithileshMuraven2 ай бұрын
@@Cablesmith how to reset it on engineer plz
@Cablesmith2 ай бұрын
@@MithileshMuraven off the top of my head I’m not sure, but turn the key to enter engineer mode and try the green reset button. Failing that look through the engineer menu
@Cablesmith2 ай бұрын
Also, make sure the detectors are clean and dust free as that’s often a cause
@hakanduygun15793 ай бұрын
Zehirlenmek için içiniz
@Cablesmith3 ай бұрын
katılıyorum, nadir görülen bir muamele
@adriatikkrasniqi14533 ай бұрын
Nice one but don’t put too much hot 🥵 author wise will fall down 😂
@adrianbaxter95693 ай бұрын
Lovely job mate, well impressed, from Cablesmith virgin.
@Cablesmith3 ай бұрын
Thanks for watching mate 👏🏼
@ironmantooltime3 ай бұрын
That is damn sexy. I feel an uncontrollable urge to bend over.