Outdoor bow hunter

Пікірлер

@Muskiehunter92 11 күн бұрын

Both solid choices. I like those Q2i's and run them on some of my 23 dia. arrows. My buddy got some of the 3" bohning X3 vanes and they are impressive too. Similar to tac in stiffness, just a tad heavier though. I have been trying tons of vanes for years now. I shoot lots of competitive archery from indoor to 3d to field so I have tried darn near everything on the market to see what works for me... General trends I see are stiff and low bucks the wind and is quiet, high and soft gives the most control but is loud... Shield cut is usually louder than parabolic, but shield cut will give more drag than parabolics usually, meaning added control. I have been very happy with the TAC driver 2.75 in a left helical 3 fletch. Stiff and suuper light, and pretty quiet. Very good all rounder that I shoot 3d with from my target bows and hunt with as well. AAE max are also phenomenal. Heavyish, but super solid option. I dont mind vane prep. I do it on most vanes anyways. Acetone and a good scrubbing on the base with a Q tip always works fine if your glue is decent. I use the pens too, but I have not noticed them to do any better than acetone. My TAC vanes have some of the strongest bonds of all my vanes. They are freaking welded. Also impressed with durability. I thought because they are stiff that they would get destroyed in 3d but they dont. They are holding very very well. Seating them well is critical. I am trying out the new AAE airazr 26 right now and so far they are decent. Like a super stiff AAE max stealth with no ribbing. 8 gns each, so not nearly as light as the TACs, but they are very stiff. Very quiet. They may be my fixed head fletching for the year. Right now its between them, the tac 2.75 and the bohning black sky blazers (basically an easton bully which is a stiffened up blazer) ... and always 3 fletch. All this 4 fletch business these days is strange. Its just more weight to get more noise and wind drift. A good 3 fletch will do everything a 4 can with less wind drift, noise, and weight. Good luck this year and enjoy your summer!

@hotshotelkslayer4547 11 күн бұрын

Q2 I for me forever…always a great seat on the arrow with now issues…nothing fancy to clean or wipe…no cleaners…just glue it and it sticks…great company service and responses…they will be my choice going forward 😊

@timparrish1847 13 күн бұрын

you'll be happy with these vans.I've been use them for 3+ years and like them. I use a Bizenbuger jig They say you don't need to prim or prep be for glueing. i use to prep but haven't for about a year and haven't had any problems.

@Not_Andrew_Huberman Ай бұрын

You just sold me on PSE, thanks. That's the customer service I want. But yeah I've seen splintering on the company you're a fan of now.

@Outdoorbowhunter Ай бұрын

Your welcome. I’m not a fan of any company.

@EatmyGrass420 2 ай бұрын

If you lower your air tire pressure down to 5-6 psi you don't need Shocks, like riding on air.

@Outdoorbowhunter 2 ай бұрын

That’s what I ended up doing and it definitely helped. I did however get the front forks with shocks. I was able to get the for a great price.

@Foreverbowhunting84 2 ай бұрын

This can happen to any bow from any company. Either way, that sucks! I tested the Mach 30 and 34 they are amazing bows.

@paulheberling2750 3 ай бұрын

Damn, was thinking about switching to PSE. How’s the levitate as far as splitting? Also, aren’t the split limbs supposed to fix the splintering? I have APA and their solid limb and have had multiple splits and was thinking it’s due to the solid limb “v.” But split limbs get rid of that issue..

@PoeOutdoors 3 ай бұрын

The M34 is the best bow I have ever owned, it isn't even close. Sounds like the PSE rep took good care of you. Everything fails or breaks sooner or later, how the customer is taken care of matters.

@wswillett 4 ай бұрын

You brag aboutt all the bows you have yet do not bring a backup? You are simply put...not prepared properly

@troybengel691 4 ай бұрын

why I always have a backup bow

@TripleRwoods 7 ай бұрын

So to be clear… PSE bent over backwards to give you great customer service and you said screw them I’ll go to another company? This happens to bows all the time for every manufacturer. If this had happened to me I think I would be a PSE lifer due to them working with me….. I have no ties to PSE but this is silly….

@user-rp6qw6ml7r 7 ай бұрын

I got nothing but Pse bows and no issues with them

@dewboy910 7 ай бұрын

The more pre-bend the limbs have, the more chance you could get a compression splinter. But none of them are immune. Hoyts are notorious for splintering on the edge. The issue for me would be the fact that just a few years down the road, PSE may not have any limbs available for the Mach 34. If I chose to shun PSE, it would be for that reason alone. That being said, who the hell would go all the way out to a western hunt without a complete back-up bow this day and time? Not me. I'll probably have my bow press and extra limbs and cams, plus a back-up bow.

@jordancler931 7 ай бұрын

Limbs are all made by the same company sooooooo this is not a good reason. I've seen it on plenty of other Companies too.

@paulr2372 8 ай бұрын

They are on sale right now for $799 at Scheels, in store only. I gotta believe it's worth $800 wouldn't you think?

@3D_CryptoCamo 8 ай бұрын

Haha that’s exactly why I’m watching this video 😂

@evanfettig2606 8 ай бұрын

Why I am watching too! Haha

@Deested 8 ай бұрын

Same here 😂

@Deested 8 ай бұрын

He paid 1700 so I’m gonna say it’s worth it

@mickeyvueful 8 ай бұрын

Same

@SnoProYo 8 ай бұрын

Interesting video, I found it looking to upgrade from my carbon Hoyt. I’ve owned carbon Hoyt’s since they have came out and have had 3 sets of limbs replaced by Hoyt over the years, 65lbs, 70lbs and custom 75lbs limbs. I’ve also had a carbon riser come apart and was warrantied by Hoyt. Anyway, I still think Hoyts are great bows, I’m just wanting a longer ATA carbon bow and the Hoyt Ultras are too slow at 28” draw and honestly the carbon Hoyts have gotten so heavy the carbon really doesn’t offer anything over the aluminum now.

@wcwcgarner2717 8 ай бұрын

Nice bow cool review on it. I am shooting a Mathews V3X 29 in granite wt gas strings in flo orange wt gun metal servings. Hamskea epsilon rest made for mathews. Total peep tech grip for mathews. Spot Hogg fast Eddie xl wt a shrewd optum 35mm scope wt a shrewd rod for adjustments and a shrewd 4 power lens. The new Mathews low pro 1pc 5 arrow quiver. Conquest control freak pro 500 stabilizers a 12 inch up front and a lower back bar wt a 10 inch bar both wt quick disconnect and the mathews engage limb legs. Shooting Easton axis 5mm 340 spine 417 grains 003 straightness. And the stan shootoff TL thumb button release. Bought the bow new a year ago.

@anthonylubic 9 ай бұрын

Thanks for sharing…I love my RX7 Ultra 👌🏻

@hunteradamson5024 9 ай бұрын

Sorry to see this happened. Probably a fluke. I’ve got thousands of shots through a 80lb s2 Mach 34 with no issues at all.

@brucehillbillybarthalow3786 10 ай бұрын

I see you wearing a Hoyt hat. Man I can't believe that is still an issue for p.s.e. on going for 20+years. I just recently purchased my 3rd Hoyt. The Z 1 S, it's also a smooth drawing bow. Almost robinhooded broadhead turning.

@goon1500ify 10 ай бұрын

Man that terrible that happened to you man I happy to hear the PSE reps were able to get you up and running so you could shoot the course buddy but as far as you saying you lost your peace of mind and confidence in your bow limbs I can understand that but I don't know if you realize that Gordon glass limb company makes all the limbs for each manufacturer in the U.S so it doesn't matter what brand of bow you go with your still getting the same quality and same manufacturers limbs even with the Hoyt bow you swapped yours out for you still got the same limbs made by the same company just with a different paint job and logo stamped on them . Every US bow company outsources their limbs to Gordon glass limb company and have been doing so for decades. Just thought you'd like to know best of luck to you and your new bow . I love the color it's beautiful man 👍🎯🏹👍

@tylerparker3024 10 ай бұрын

I want the levitate so bad. Its the best looking bow out there. Just so expensive. Limbs will fail its just the way it is.

@mr.monitor. 11 ай бұрын

The full suspension is great but not needed. Get the tire liners and the flat out liquid sealer and you will never get a flat again.

@Outdoorbowhunter 11 ай бұрын

I was looking at the liners and think I’m gonna pull the trigger. I did just buy the cargo rack.

@jimmiekaelin4804 11 ай бұрын

Can’t do PSE, sorry.

@ianesterhuizen9179 11 ай бұрын

Just an FYI. All of the limbs for all of the bow companies are made by the same manufacturer. No matter what you are being told.

@jimmiekaelin4804 11 ай бұрын

Maybe, but limbs are built to a particular bow manufacturer’s requested specifications, which differ drastically between companies.

@ianesterhuizen9179 11 ай бұрын

@@jimmiekaelin4804 agreed.

@KennyHollingsworth 11 ай бұрын

Not true.

@TalonID 11 ай бұрын

I've seen "unzipped" limbs on every major manufacturer. I've owned Mathews, Hoyt, Bowtech and PSE. Shoot what you shoot best.

@UrMom_says 11 ай бұрын

When I shot Redding this year the only two guys in our group who had Mathews Bows both had the same exact thing happen to their limbs. One day after the other. They weren't together just coincidence. Just thought that might be relevant here

@sinepari9160 11 ай бұрын

I was a huge PSE fan for over a decade back in the late 90's/mid 2k's. Then I switched to Hoyt and haven't looked back. I go shoot all the new bows every year at my LBS and haven't found anything that would make me want to go to another brand. Maybe if they sponsored me :).

@Outdoorbowhunter 11 ай бұрын

Yeah I definitely like to shoot all the new bows I can. It takes me a little longer considering I’m a lefty. But I’m definitely extremely happy with my Hoyt.

@GlenKimpton Жыл бұрын

What would you do if the same thing happened to the hoyt now?

@reddawng43x91 11 ай бұрын

😂😂😂 u funny! It’s a Hoyt bro! You know how they test they bows? I do! 1000 dry fires 🔥 they drag they bows behind trucks tied to a rope hitting shit all the way ! No other brand holds up like a Hoyt! This a fact !

@wolvesnight 11 ай бұрын

Not gonna happen with a Hoyt...just aint...built to last 💪

@jakeroberts9307 8 ай бұрын

@@reddawng43x91so far since the HBX cam has come out my local shop has replaced more Hoyt limbs than any other make. I’ve had one go out a Ventum pro 33, buddy had a set go bad on his rx7, and another buddy has had a set go out on his Ventum 33. Cant really say Hoyt’s are tougher than anyone else if they are consistently cracking limbs.

@nockit86 7 ай бұрын

I’ve seen Hoyt’s limb split. Matthews too. It happens.

@dragonheartvid Жыл бұрын

On any important hunt or tournament if at all possible have a back up bow. Lesson I learned many years ago. Sound like the PSE customer service rep went above and beyond to help you at the shoot. Understand why you changed. Confidence in self and equipment is paramount in exemplary performance.

@Outdoorbowhunter Жыл бұрын

Yes I usually have a backup bow when traveling for most things. But unfortunately I got rid of my backup bow. Yes the rep did go above and beyond. Definitely have to have confidence in your equipment.

@jackbuendgen389 Жыл бұрын

Man it seems Mathews and hoyt are the two manufacturers that are making trouble free bows. Bowtechs have terrible cable wear, elites are hit or miss on whether they'll tune, and pse is a solid meh.

@joshflanery1352 Жыл бұрын

Man you hit the nail on the head for my experiences

@jackbuendgen389 Жыл бұрын

@@joshflanery1352 my bowtech ss34 is eating cables like a 28 nos let eats barrels. I COULD NOT get my omnia to tune. And like I said pse's are meh so are ok some are not ok. My Mathews vertix performed flawlessly. My hoyt ventum 33 was an arrow pounding machine.

@Outdoorbowhunter Жыл бұрын

Man I really liked my PSE to. I had a v3 Mathews and it was a solid bow. Had a couple different Bowtech’s and one was good and one not so much. This is my first Hoyt and so far it has really made me think why I didn’t try one earlier.

@javedmclean7997 11 ай бұрын

Ther was a review of a Mathews V3 when they just released. The guy who was doing the review had the bow blew up while testing the draw cycle. Every bow company has their issue but a company is only as good as its customer service.

@mayhem035 Жыл бұрын

That's sad, i heard that most of the limbs for the majority of bows are made from the same company in the us.. i hear you! 👍👊

@denniskay8178 Жыл бұрын

All bow manufacturers make there own limbs in house.

@ecrank83 Жыл бұрын

They make risers in house.. most limbs are sourced from Gordon Glass..

@eclipsearchery9387 Жыл бұрын

@@denniskay8178No - The actual limb material is made by Gordon's Composites. The bow companies grind the 'blanks' but they do not make the limbs from scratch....Gordons is a massive company, the bow side of stuff for them is small fry...they had serious problems with clear glass laminates for trad bows. They consistently weren't propely clear with streaks running through them. these were areas where the glass fibers weren't properly coated in resin.....Gordon's basically said they couldn't care less. Sounds like these limbs are having the same 'issues'. Ultimately if the load on the limbs is appropriate the only likely reason for them to fail is incorrect wetting of the fibers with resin.

@jessebott1879 Жыл бұрын

How many arrows do you think you shot threw the Mach 34? I was wondering if the carbon fatigues after awhile but I’m not sure if it does. I picked one up in April and prolly put close to 4000 shots threw it. This has me a little worried now.

@Outdoorbowhunter Жыл бұрын

I’ve had it about 6 months so I probably at least had around the same as you maybe a little more. I really did like the bow. But after mine did that and I seen a few others doing the same. But it may never happen to yours.

@mmcguire5687 6 ай бұрын

Actually this is the first I have heard of PSE limbs splitting. I have an EVL and a Mach 34. I have over 10 K shots on my EVL and maybe half that on my Mach. Whether I’m shooting 3D or hunting, I always have both bows. One is none, two is one.

@tomtolentino7575 Жыл бұрын

It’s becoming apparent that quality issues with PSE is starting to degrade, since the change of ownership of PSE from founder/original owner ( Pete Shepley ) to some off brand investment group. Pretty darn sad. I still own 4 original bows ( before change of ownership ) of earlier years, and they all shoot lights out to this day, with proper maintenance, and maybe some minor accessory changes like upgraded sights, and that’s pretty much it. All in all, all 4 of them seem to shoot better if not the same performance as the day they were out of the box. Sorry for your dilemma, but hey…..nice rig ya got there buddy…good luck with future TAC, and future hunts 😎🏹🏹👍

@Outdoorbowhunter Жыл бұрын

Yeah I was afraid of that after the ownership change. I thought it may have been a fluke. But after seeing the same problem on several other bows. I knew it was the best decision.