I tried using a 1/4 masonry drill bit on brick but the hole was too big; the anchor easily came out. I am practicing on one loose brick I found in my yard. More research is needed to accurately select the right drill bit for the type of brick on my home.

O' my Gosh. I messed with my rear wiper blades on my 2016 Rav4 for 30 minutes and came close to breaking it. It would not open wide so I could do anything. I was so close to forcing it. Finally I searched KZfaq and found your video. Thank-you Sir!! so much. These car companies must think it is so much fun making it difficult. I have done my job for the day, now I can have a beer. You are a life saver.

Thanks!! Very clear instructions.

I know I can do the research opinions full synthetic? And how much do you typically spend changing yourself? Where do you take your used oil

Good video, thank you

How did you know the correct inside and outside diameter of the plastic hinge sleeve? Thanks

What product did you use and how did it hold up over time?

You told us everything except the size of the “very specific filter tool, make sure you get the right size” but you don’t tell us the size.

Why not use drano?

Thank you for the video! ❤ Now we have our issue fixed!!!

"Thiiis guyy..." thanks bro

What is the name of that stepped attachment?

Great, clear instruction. I'd probably run the engine to check for leaks before installing the skid plate though.

Much appreciated the tutorial you demonstrated absolutely well now I have mines set up.. thanks very much

What size are the mounting screws

So what if it still leaks???

quick, to-the-point no BS explanation. I have already changed my new 4R oil once before but wanted a refresher before doing it again today. thank you

Success. Your video was close enough to show the steps to redo the battery on the key fob on my 2016 RAV 4. Thanks alot.

If you Accidentally touch the bulb, just wipe it with a clean rag

The plastic housing that came standard was either tightened too far, or became fused on mine. Had to be chiseled off. Your local auto parts store sells a replacement housing, made from metal now, that greatly improves removability. Highly recommend.

My auntie and uncle set one in the basement where i live 6 months ago there's a ton a drain flies now..please..help me give me a idea because i have those drain flies all over my basement

No crush washer on drain bolt?

Thanks, this video explains everything perfectly. First time changing the oil in my rav and you’ve taken the mystery out of it! Well done :)

Tu explicacion es muy buena, quiero ver quien te hace preguntas de que no entendí! Hasta mi perro lo captó! Gracias! 😃✌🏽

I am always off by about a mm. The holes seem to line up but then when I put in the anchors it doesnt line up

Thank you. I’m currently dealing with this issue 😫

Great job going fast

The best and most clear instructions on youtube for this exact situation. Thank you!

Not only helpful,, but fun to watch. Great video!

Recently purchased a 2012 SR5 and changed mine for the first time yesterday. Wasn’t too difficult except that I could not remove the skid plate completely so I just left it hanging and had to struggle to get to the filter from the behind the passenger side tire area. I was dreading the potential that the filter would be overnighted but it wasn’t so no issue there. I did notice that there wasn’t a washer on the drain plug of the oil pan so I added a blue nylon washer to be on the safe side. I 100% agree about the difficulty of checking the dip stick. It was already difficult with used oil (around 2k miles on what I changed) but was almost impossible to tell with fresh oil. I finished a little after dark and like you, I had to recheck this morning. Maybe I’ll have better luck with the skid plate next time. I plan to do it again in 2k miles as this was just to flush the oil that was in it when I purchased it since I wasn’t sure what the dealer was running in it. I had just enough Kirkland oil to use for this change but plan to go to Pennzoil Platinum High Mileage since I’m at 108k miles. At 110k my plan is to change every 5k so the nice round numbers will help remind me.😊

Just got done putting this grill together thanks to your video!! Thank you soo much! Would have never of got it done with the instructions it came with

Got a issue with the mount, my door is like a hotel door, metal with with a lip on the edges of the door preventing the door from closing when the mount is applied…any suggestions?

Thanks for the walk-through, I fixed my door to my closet thanks to your help :)

Thanks 😅

Great video..Thank you for showing how to change the oil for the 5th Gen. 4runner..

Man, I have replaced the washer and applied plumber’s tape and my hose still sprays out? Any other ideas?

9:50 a.m. You are a GENIUS!!!

Your vid is the absolute best 4Runner oil change vid. Soo many poor ones out there from some big channels.

Thank you so much for making this easy for me! Much love!

PERFECT THANK YOU!!

There's a glitch in 6.36-6.41

Very helpful, but somehow I needed 1 more 2x6x8 and one less 2x4x8

It would be nice if Toyota put a big enough opening to get to the oil filter too without having to take that monster off every time

I would love to hear your thoughts after a year of use.

This is great, thanks much 👍👍

Is this the wireless one

This episode was on March "forth" (fourth in 2017)! Today, 7/1/2024, I "marched forth," by finding this episode! Thank you! Why didn't I think to tighten that metal tube to keep the ball joint from popping out? The problem closet door is fixed? I'm happy. My wife is happy. Even our ol' puppy is happy!

I had half a jug of the hair clog remover by instant power (red bottle) but I have no idea if it was actually the chemical, or if i just poured regular water down

Any recommendations on the cheapest high gloss paint I have no idea what I’m doing but the booth is complete just need a paint 😊

Good 👍🏽 Thinking