They need to put sliders on the top corner/ top . Pita cannot be easily be changed with one finger. Sliders also need center detent
@marcochierico51508 сағат бұрын
Thank you so much for this video. It's a shame you can't add the f2 and f4 too.
@emmanuelcheveau489115 сағат бұрын
Hi, I need to update the firmware of my HDZERO goggles. Can I use an SD card of 8 Gb ??
@Joerg09017522 сағат бұрын
which color you have? I order a spacegrey and become a „light grey“ and the dealer say this is right…
@bboyM4rk0Күн бұрын
What do you think about putting bigger motors on the Pavo20? For example 1204 or 1404? BetaFPV has a F405 AIO 20A 2-4S board, so maybe swap that with the original and go 4S with 5000-6000kv motors, any thoughts?
@owlboy66772 күн бұрын
Radiomaster is sleeping. Jumper already lissened to the comunity.
@OneManUnmannedКүн бұрын
Haha.. we shall see. These manufacturers play close attention to their competitors
@GR33ZY.A12 күн бұрын
That notchy feel can be adjusted from the inside 😅
@OneManUnmanned2 күн бұрын
Thanks.. Any reason why it would come that way?
@GR33ZY.A1Күн бұрын
@@OneManUnmanned maybe person from the setup factory? Because I just received mine yesterday and that notchy feel is not there
@GR33ZY.A1Күн бұрын
@@OneManUnmanned Hi quick question ❓ so recently tried to flash my transmitter with passthrough option and go an error due to the Manual serial device selection part. How can i fix that? I only see COM16 on there.
@RickyD19683 күн бұрын
All companies that are making these FPV kits for beginners please LABEL the Radio !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@OneManUnmanned2 күн бұрын
Hopefully they start doing that. I think EMAX did with their latest RTF Kit.
@jonathonappleby3143 күн бұрын
Thanks for this video it’s popped up while I’m researching getting into FPV and narrowing down my first drone choice and this has help 100% thanks for taking the time ✌️
@OneManUnmanned2 күн бұрын
Anytime..Glad the video helped.
@genjitsu74483 күн бұрын
This radio - this is the one! The color screen may not be necessary but I like it a lot. That and the fact that it is a touch screen... geez, how hard was it for them to figure out that we might like something like this. The Boxer should have been offered with this configuration already. For my next radio I will be buying this radio for sure! I also really like the full size JR bay - these modules can get hot so size can be a real factor (larger is better) Also, nice review, nice pacing and presentation, not too long. Well done.
@OneManUnmanned2 күн бұрын
Thank You for the kind words..I appreciate that.
@jeeveshlohat-vl9kg4 күн бұрын
Good looking frame. Bro isme GPS ka 3D printed part kese lge ga
@OneManUnmanned2 күн бұрын
It’s not a bad frame…I did not put GPS in mine, but the antenna fits in the TPU mount. You will have to configure the rest in BetaFlight. It is primarily used for GPS Rescue if you loose VTX or RX signal.
@stevereed1664 күн бұрын
thanks for the build video, simple instruction sheet would have been handy & can't print off the on line manual as i have just destroyed my second & last lousy HP printer, thanks again.
@OneManUnmanned4 күн бұрын
Haha.. no prob. I agree, an instruction sheet would be nice.
@jas-FPV4 күн бұрын
Compare to Frsky X14 (which Jumper copied…)
@OneManUnmanned4 күн бұрын
I don't have that radio, but it does look nice.
@LehtusBphree2flyFPV4 күн бұрын
Now if they came out with clear color cases they would dominate the market but pastel's?! Come on this is the future not the 60's make that radio clear in different colors with LED lights inside?! This radio would sell out and be really hard to find in stock. My boxer still rocks with AG01 gimbals clear case with LEDs but boxer do color screens like they SHOULD of done in the first place. Boxer will always come on top. A boxer plus with color screen and that radio antenna would be the next sell out. We'll see if they read the comments.
@OneManUnmanned4 күн бұрын
Haha.. they might. I do feel RM has no option but to come out with a color screen Boxer. And you're right, a transparent case with LEDs would be wild.
@elxero21894 күн бұрын
Indkviduals cant buy that radio from your link . that link is for dealers
@recklessfurytv5 күн бұрын
Thank you for the video review. Well Done. Can you adjust the tension on the sticks?
@OneManUnmanned4 күн бұрын
Yes, but I think you have to access it from the back, which requires you to remove the back cover. Here's a video from Jumper's channel: kzfaq.info/get/bejne/edORpaWJnaevYX0.htmlsi=pJm5-CPlW2iRBEKJ
@small-n-fun20615 күн бұрын
I have this drone, love flying it, it's a rocket of a tiny/cinewhoop but I'm having issues with my 4k, when I put the card in the drone the video comes out glitchy, like it is a real bad stop go type video
@OneManUnmanned4 күн бұрын
You might need a new DVR, but before you do that, try to use another SD card. Sometimes these recorders can be picky and need the highest quality Micro SD cards.
@small-n-fun20614 күн бұрын
@@OneManUnmanned I'm embarrassed lol, it was the computer I was trying to view it on, I pulled the files up on our newer computer and it read fine. I guess if the device isn't 4k then it won't play 4k
@dingr5 күн бұрын
I've had mine for a few days now. Strangely, mine did not come with the gimbal protector. It is the platinum white model. The colour screen is totally fine in bright sunlight, in my opinion. The touch screen is not as sensitive as the one on the Radiomaster TX16S. Just takes a little getting used to.
@OneManUnmanned5 күн бұрын
Thanks for the insight and experience since you own both models. Yeah, mine came with the gimbal guard, which was a surprise. Thanks again.
@MaksGrey3 күн бұрын
@@OneManUnmanned yeah, probably its only for bloggers they send max setup. I Has ordered my t15 when it starts selling and using it for almost two weeks. There was and still no option to get it with CNC halls, only regular plastic. So I have to order ono more radio t14 with CNC and replace it. Also stick protection its only available as extra for 20$. Great radio btw.
@unknown_person_7775 күн бұрын
im new to this rc plane hobby and i want to buy my first radio....i just wanna ask if i buy one transmitter, any receiver will be compatible with it???? and what radio do u recommend for a beginner???
@Jynxx_135 күн бұрын
Buy a Radiomaster TX16S. Look at what everyone else is using. It's the TX16S for a reason. So much community support already in place and it's an incredible piece of tech. This new JUMPER is just trying to be a TX16S.
@unknown_person_7775 күн бұрын
@@Jynxx_13 thanks
@elxero21894 күн бұрын
@@Jynxx_13I wouldn't say that at all the only thing missing in comparison are two switches and sliders ..some people prefer smaller radios and my tx16s mk2 died for zero reasom couple months our of warranty and the company told me to kick rocks so I'm getting this. I've been in the hobby more than 20 years I've never had a radio die in under two years NEVER!
@OneManUnmanned4 күн бұрын
@unknown_person_777 You can buy any radio, but the receiver has to be the same protocol in order for them to communicate. So, an ELRS radio will need an ELRS receiver. A Crossfire radio will need a Crossfire receiver. A DJI radio will need a DJI receiver/air unit. Asking some about the best radio is a highly subjective question. I personally like smaller radios...Larger style radios have tons of features and high power output, but they are very bulky and heavy. That's why radios like this T-15, Boxer, and Mambo are so popular. They have all the features of a large radio in a smaller form factor. You'll have to know your priorities and preferences(size,price,output, protocol).
@OneManUnmanned4 күн бұрын
@Jynxx_13 The TX16s is the industry standard, but that doesn't mean everyone needs a large/Full-sized radio, especially a beginner. Did Radio Master copy the Mambo, or other way around? Either way, it doesn't make the other product inferior.
@12fpv5 күн бұрын
i wish i could get that transmitter but im 12 and so i aint got alot of money but im chillin
@OneManUnmanned5 күн бұрын
It will come with time, but I agree it's not a cheap hobby.
@mortonbeard22406 күн бұрын
Does it need to be programed or is it ready to go out of the box?? I heard some controllers had to be programmed.
@OneManUnmanned6 күн бұрын
It is is programmed, and the 1st four channels are setup, but you do need to setup/assign your Aux switches(which make sense since that's a user preference).
@OneManUnmanned6 күн бұрын
Thanks…It actually looks better in person, and maybe in a different color.
@markwilliams56546 күн бұрын
Does look nice 👍
@MVRAR16 күн бұрын
How much flight time will you get?
@ronniequalls72178 күн бұрын
I watched Whirly Bloke video on this quad & he went up a notch on the camera mount with the camera & that took props out of view on this quad 🎉
@OneManUnmanned2 күн бұрын
Thanks..I’ll look into that.
@dominikhangl10 күн бұрын
Great Review. Thanks
@OneManUnmanned4 күн бұрын
Thank you, I appreciate that.
@joepaige755310 күн бұрын
Great little mod! I'm impressed with the crispness of the Runcam's 1080p output! Which flight mode were you using? You had nice bright lighting conditions, would be interesting to see how it performs in low light. One issue with the Aquilla 16 is that it is so light and small that it does not perform well in any kind of wind. Pretty much would need perfect conditions to get ok results. Still, this seems like a fun solution for a low price entry point!
@OneManUnmanned2 күн бұрын
Thanks…Its not too bad considering it is not a very powerful drone. I was in Sport Mode “Fast” speed setting.
@brkfpv6010 күн бұрын
i bought one , i like this little thing . thanks for review
@OneManUnmanned4 күн бұрын
Thank you, I appreciate it.
@NaorFPV12 күн бұрын
no storage
@OneManUnmanned2 күн бұрын
Nope
@TheMadone30114 күн бұрын
I would like to see a video on how to update the Jumper T14 ELRS configurator via WIFI, including the binding phrase!
@rrenegadoo15 күн бұрын
excellent video..... can I do this on my DJI fpv goggles V1?.... Thank you,
@OneManUnmanned2 күн бұрын
thanks
@mortonbeard224015 күн бұрын
Can't get mine to fly reliably. It takes several attempts be for it flies. Spins in circles before shutting off.
@OneManUnmanned2 күн бұрын
That sucks..I recommend contacting EMAX or the distributor
@mortonbeard22402 күн бұрын
@@OneManUnmanned Things have gotten better. I think I damaged some of my batteries. Thanks for answering.
@betaodrone16 күн бұрын
Very cool bro, I'm going to build mine now
@OneManUnmanned2 күн бұрын
Awesome
@LehtusBphree2flyFPV20 күн бұрын
I got my uncle Chuck this kit and i hope it gets him into the goggles to fly more since he's never been in goggles before. Uncle Chuck i hope you like the FPV experience like we all do. You didn't feel the stick feeling in analog like you do in digital FPV.
@OneManUnmanned2 күн бұрын
Awesome..Hope he likes it.
@wassiliys191825 күн бұрын
For everyone who tried this, and it didn’t work - in my case downgrading Literadio’s firmware from 2.1 to 1.2 worked.
@eddaardwolf26 күн бұрын
Between the Aquila16 and the Cetus X, which one has more potential for better upgrades? I’d like to get my first fpv drone and eventually incorporate an insta360 3s hard mounted.
@DFEUERMAN26 күн бұрын
Nice video! My quad FC came presoldered with a yellow signal wire on the underside of the FC near the bootloader button. Any idea what this might be? It came as a plug with a battery voltage and GND.
@Ghost_GA26 күн бұрын
Hello. I'm interested in the tinygo and the aquila 16. How well this aged? Can you make a comparison video about this drons? :)
@olafchristiansen440527 күн бұрын
Oh my lord thnk you so much for posting this when you said what was that I have that same problem and it annoys me so much
@OneManUnmanned2 күн бұрын
Yeah, it sucks..Tumble washout. It does a better job in Sport mode.
@Moroder_Drone28 күн бұрын
Also I think the LEDs might interfere with the filming because of the bright light
@Moroder_Drone28 күн бұрын
Hi!... Where is the location of the micro SD card for 4K recording?.. thanks
@tranvanduy-truongthphuochai328 күн бұрын
If I cut off the protective frame, replace 4 larger wings. So can Aquila 16 carry DJi actione on its back?
@OneManUnmanned2 күн бұрын
no It cannot
@WR3ND29 күн бұрын
Thanks for the great details.
@OneManUnmanned2 күн бұрын
You bet!
@mohycanaАй бұрын
@onemannunarmed Do u install the Firmware Update for the AQ16 ? It cames on the offizial Website 2 month ago
@niccouz793227 күн бұрын
The aquila got a update ?
@mohycanaАй бұрын
I'm from Germany and came across your video. You're the only KZfaqr who draws attention to these problems! Everyone else is afraid to say something negative. The Aquilla 16 is unflyable outside. It vibrates and shakes like crazy. It's not fun, it's annoying... The drone is not a whoop drone... you can only fly straight with it in normal mode.
@mssippijim17 күн бұрын
@@mohycana I reduced the pids 10% with a calculator spreadsheet that does the math. It’s a bit more stable. I fly mine outdoors often in sport mode.
@mohycanaКүн бұрын
@@mssippijim Thank u... but i sell the Drone 2 Weeks ago 🤣.... look at my Channel... i bought a mob7 HD 1S... i liked more
@YT_ORCАй бұрын
7:14 thats why the drone is sh1t... flying outdoor is pain in the a..ss... vibrations from hell
@OneManUnmanned2 күн бұрын
Its common with smaller drones and certain Flight controllers. I just wish it could be tuned out from the factory.
@light5087Ай бұрын
Can you send me a link too expressLRS receiver and how to put it on
@jithinkgeorge9232Ай бұрын
How much is the runcam affecting the flight time ?
@OneManUnmanned2 күн бұрын
Maybe shaves off a minute and a half. Thats not bad considering the drone can fly for 7 minutes on a new battery.
@dbabs1128Ай бұрын
Hey man, great video. Will those goggles work with radiomaster controller and nazgul drone?
@iffyfpvАй бұрын
If your drone has an o3 air unit or a air unit lite/caddx vista/runcam link then yes, it will. Although you might have to update or revert to a different version to make the v2 compatible with the o3 and air unit lite.
@chaoticadventureАй бұрын
I ordered the truck with remote and the camera separately for $20. Since i already have fpv goggles.