SpeedyBee Mario5 | Cool Design, but Difficult to Build 🥵

Рет қаралды 3,199

5 ай бұрын

Speedy Bee has been on a winning streak with their affordable electronics and full sized drones. Well, they're back again with the Mario5, a 5-inch drone in both a "dead cat" and "X" versions. Could this be the right frame for you? For more info, check out: tinyurl.com/5n7bpp3a
Buy The Mario5 Here: tinyurl.com/5n7bpp3a
Buy The Bee35 Here: tinyurl.com/z8ns56vd
Buy The Bee35 Frame: tinyurl.com/2f9dzmhv
Buy the SpeedyBee VRX Here: tinyurl.com/yc4knsp8
Buy the SpeedyBee VRX Here: tinyurl.com/yc72efpa
Buy the SB F405 V4 Stack Here: tinyurl.com/5n6dsctt
Buy the SB F405 Mini Stack Here: tinyurl.com/2tt9nvke
* All links are affiliated unless otherwise stated, and helps support the channel at no cost to you. Thanks
Join me on Instagram: / onemanunmanned
RELATED VIDEOS:
SpeedyBee Discharger: • SpeedyBee Discharger |...
SpeedyBee VRX: • SpeedyBee 5.8G VRX | G...
Nord5 HD: • Nord5 HD 1st Flight - ...
Pavo20: • BetaFPV Pavo20 | A Big...
Pavo Pico: • Pavo Pico - Mind Blowi...
Pavo25 HDZ: • PAVO25 1st Flight | So...
Pavo 30 Review: • BETAFPV Pavo30 | Setup...
Meteor75 Pro HD: • BetaFPV Meteor 75 Pro ...
Freewell ND Filters: • AMAZING Results From O...
DJI O3 Air Unit Review: • DJI O3 Air Unit - Shou...
DJI Goggles V2 1st Impressions: • Everything you NEED to...
DJI Goggles V2 Setup & Flight: • DJI Goggles V2 Setup &...
Bind DJI Goggle to O3 AU: • Binding DJI Goggles V2...
WTF OS Root on DJI Goggles: • Get More Features From...
BetaFlight OSD in you DJI Recordings: • DJI Goggles V1 & V2 Ca...
BDI Adapter: • BDI Digidapter V2 | Fl...
#speedybee #fpv #5inchdrone

Пікірлер: 39

@alfdriss 5 ай бұрын

My son's one has been build in an evening last friday, including all electronics , and made his maiden flight (4min.30) on the next morning. In the hands of a full rookie (apart of few hours on simulator), it's a formidable machine!

@OneManUnmanned 4 ай бұрын

Thanks, I appreciate the feedback.. I'm looking forward to building mine.

@stevereed166 4 күн бұрын

thanks for the build video, simple instruction sheet would have been handy & can't print off the on line manual as i have just destroyed my second & last lousy HP printer, thanks again.

@OneManUnmanned 4 күн бұрын

Haha.. no prob. I agree, an instruction sheet would be nice.

@betaodrone 16 күн бұрын

Very cool bro, I'm going to build mine now

@OneManUnmanned 2 күн бұрын

Awesome

@northerntierfpv8947 5 ай бұрын

Thanks for sharing, interesting design for sure! Cheers!

@OneManUnmanned 5 ай бұрын

Thanks, it does have a unique design.

@chrisneru6564 4 ай бұрын

It's one of many easy builds I have done . Came together easy as.

@OneManUnmanned Ай бұрын

Thanks

@MikeCarr07 5 ай бұрын

I just did the Master 5 V2 build, lots of fun and a solid frame.

@OneManUnmanned 5 ай бұрын

Awesome.. this one does feel VERY solid. I was skeptical at 1st, but by the time it was assembled, it felt sturdy.

@MikeCarr07 5 ай бұрын

@@OneManUnmanned I pulled a bonehead move, I was testing Rescue Mode and I didn't think it was doing anything, I went to switch modes but I disarmed it instead....130 feet drop, nose first, fortunately it landed in a bush but I don't think the frame would have been damaged much. Now I man practicing muscle memory drills on my transmitter.

@SkeezyFPV 5 ай бұрын

Great review

@OneManUnmanned 5 ай бұрын

Thanks, I appreciate the support.

@stewartabel 2 ай бұрын

Thanks for this video! I'm following it today/tomorrow to do my Mario build! very informative,. thanks alot. Just one question, for GPS, what options for mounting do we have? many thanks!

@MrFadjule 5 ай бұрын

Good frame vid, will come back to see it get its' guts packed

@OneManUnmanned 4 ай бұрын

Thanks!

@damaca_fpv 5 ай бұрын

You are right, not an easy one, beautiful tho ❤

@OneManUnmanned 5 ай бұрын

It is beautiful... But it was difficult to hold the mid/ bottom plates, keep the front camera parts together, and know what bolts to use during assembly. It did turn out great, though, and should be an awesome build.

@damaca_fpv 5 ай бұрын

@@OneManUnmanned yes, when I was finishing the build I notice the middle part was bent 🤦🏻 And I had to do it all over again hahaha but I love it. Hope it flights as well as it looks

@jeeveshlohat-vl9kg 4 күн бұрын

Good looking frame. Bro isme GPS ka 3D printed part kese lge ga

@OneManUnmanned 2 күн бұрын

It’s not a bad frame…I did not put GPS in mine, but the antenna fits in the TPU mount. You will have to configure the rest in BetaFlight. It is primarily used for GPS Rescue if you loose VTX or RX signal.

@Binkoro 4 ай бұрын

Thank you again. I'm sorry, I do have one more question if you don't mind. Since I want to install a GPS, it looks like I will have to install the FC/ESC stack backwards in order to have the XT60 come through the front. However, I don't want to do that, since it will mess up the length of all the other cables from the connectors on my F7 V3 stack. If I mount the FC/ESC stack facing forward, is there enough room between the stack to pull a long XT60 pigtail through to the front?

@OneManUnmanned 4 ай бұрын

I'm confused about the last part of your question, but I just finished the build on this frame today. I used some electronics from a previous build, but I had to install the FC and ESC in reverse like you asked. I did NOT utilize the XT60 plug integrated in the rear TPU. I actually wired and routed the battery lead through the front hole. There was actually space for the capacitor between the front FPV camera and the flight stack.

@Binkoro 4 ай бұрын

@@OneManUnmanned No worries. I figured O can install tue FC facing forward and the ESC facing backwards. as long as the FC is facing forward, everything is good. i just have to reverse tue order and direction of the motors.

@kurtzFPV 5 ай бұрын

Been flying the old speedybee fs225 v2 for nearly 3 years now and still love the frame. Have you seen their mario 8 folding frame?

@OneManUnmanned 4 ай бұрын

I've seen it, but it's not for retail...At least not on the SpeedyBee site. I think you have to go to Bangoood or Alibaba to find it. I inquired about it months ago, but was not available for review.

@fnkycoldmedina 4 ай бұрын

hey , do you have a v1 dji air unit you could test fit in that frame for me ? speedybee told me the v1 air unit would fit in the rear but my concern is if the camera cable will reach the front mount

@OneManUnmanned 4 ай бұрын

I just did the build this afternoon, but I don't own a V1 Air Unit, sorry.

@fnkycoldmedina 4 ай бұрын

@@OneManUnmanneddid you put a 03 unit in it ? if so was there length to spare as far as the cam cable? i believe the cable on the 03 is 115mm and the v1 is 100mm

@d33dkiwu 5 ай бұрын

first 🤙

@Binkoro 5 ай бұрын

is there enough space to fit a VTX with the following dimensions? 36mm*27.5mm*8mm

@OneManUnmanned 5 ай бұрын

What VTX is that? I'll be installing the components in the next day or two...I can check.

@Binkoro 5 ай бұрын

@@OneManUnmanned It's the Foxeer Reaper Extreme.

@OneManUnmanned 4 ай бұрын

OK, so I just did some measuring, and here is what I have. 40mm from front to back(mid standoff to where rear TPU starts) 38mm side to side (width) 23mm from mid plate to top plate (height) Hope this info helps.

@Binkoro 4 ай бұрын

@@OneManUnmanned thank you!

@NaorFPV 4 ай бұрын

not so difficult

@OneManUnmanned 4 ай бұрын

Maybe not for you, or me for that matter, but compared to other frames, it's a bit more difficult. If you look at any reviewers that built this frame on camera, they had a few "fumbles" or mishaps, including myself. It's still a good quality frame and done, just not the easiest to assemble, especially with the not so clear instructions.