Make me now be aware if i ever buy a wrapped vehicle DONT! hiding a crazy story
@Eweazy-mh8gd18 күн бұрын
How much lighter is this hood than OEM? Any good weight savings besides looking awesome?
@ZackBadCompany123420 күн бұрын
Did that clutch work for that engine?
@ReimaginedWraps19 күн бұрын
I havent had a chance to get it back onto the bike yet unfortunately. I do plan on upgrading though, this is a bomb waiting to happen
@ZackBadCompany123418 күн бұрын
@@ReimaginedWraps very curious I have that same clutch on the same engine I'm in the process of dropping into a lawn mower
@JesseRizo24 күн бұрын
🔥🔥
@user-ws4pr5ce8vАй бұрын
Will the lip kit fit a xts 2015 ( the cts 2022 have the same dimensions as the xts?)
@dadsrock4252Ай бұрын
Go old school and make one just saying
@ReimaginedWrapsАй бұрын
Was going to go with sealant but i was worried about the back spacing of the cam and crank. The case is what holds the back end of the shafts into the engine. The gasket thickness is specific in that sense
@frosthoeАй бұрын
dont drag seals across rust, it ruins then the very first time you do it the lips are scratched. ALWAYS, wire brush, sand gently, or wipe with oily rag. and only remove on aan oiled shaft. dont be shy, oils cheap. Go easy coax it off, then before assembly Emory or 1000 grit it til smoth-ish. Not too much be sparing, and NEVER sand or wire the shaft and seal lip interface area. Old performance machinist here. Best wishes. Ps those stock connecting rods suck, be careful! They are made from hopes, dreams, and cost cutting measures. AKA nearly useless for real performance. They WILL fail without an Rpm limit..Wiseco proforged pistons rings pins clips and some decent Cro Mo beam rods, and a stud kit will save the entire engine. PsPS only run 100% synthetic oil. ...Dang I left a graveyard of Briggs and IH back then... I once tried to run nitrous on a briggs with no added fuel. Blowtorch Briggs go screeeee clank a clunka and shot sparklers out the exhaust. I was 13...I didnt know it needed fuel too...lol
@ReimaginedWrapsАй бұрын
So much great information!! Thank you so much for taking the time to leave this comment to help me and others out. Thank you for watching my video as well!!
@lyonknives1784Ай бұрын
Yes. Definetly save the pieces.
@joelnicholson8606Ай бұрын
Looks like a $1600 wrap lol
@icyroads3431Ай бұрын
how many feet of vinyl wrap did the wing take to do?
@ReimaginedWrapsАй бұрын
I wish i could answer this question accurately for you, this was many years ago and i dont fully remember. If you were looking to wrap the complete wing you could order 6ft and that should do the trick.
@icyroads3431Ай бұрын
@@ReimaginedWraps ok thanks man just ordered some carbon fiber wrap for mine!
@ReimaginedWrapsАй бұрын
@icyroads3431 very nice!! Its going to look great!
@craigpennington1251Ай бұрын
I've come to realize that you must have all the necessary parts even before you dismantle that engine. Makes things go so much easier.
@ReimaginedWrapsАй бұрын
Having the gasket would have definitely sped this up for me
@snooka2484Ай бұрын
I would have my truck wrapped by these guys simply because of this video. I love it when shops call out other shops on poor workmanship and then showcase their own work in comparison. Good wrap btw
@ReimaginedWrapsАй бұрын
Thank you for watching the video!! I hope this was able to bring some value.
@loadedtomcatАй бұрын
I can tell you guys weren't popular at all with your teachers
@swornimyakamithemtbrider9724Ай бұрын
Cost, location , Of doing it
@ReimaginedWrapsАй бұрын
I ended up closing my shop and i am not offering any vinyl wrapping at this time.
@JesseRizo2 ай бұрын
🔥🔥
@MigookNomNom2 ай бұрын
Spring compression was difficult to watch; luckily you didn’t get hurt.
@ReimaginedWraps2 ай бұрын
Im not a big fan on those old harbor freight spring compressors myself. Luckily i have since found a really cool spring compressor that mimics the style that we use at Mercedes Benz when we replace struts in shop. I feel so much more comfortable with the new tool! Thanks for watching the video!
@MigookNomNom2 ай бұрын
@@ReimaginedWraps harbor freight works… once lol just gotta be safe and do it between 2 tires.. I’m old school
@kevinp75192 ай бұрын
Guy probably DIY
@ReimaginedWraps2 ай бұрын
Unfortunately i knew exactly who did this and it wasnt himself
@venusfan2 ай бұрын
Alot of us are having problems with that very same thing leaking and BMW playing the expensive module right underneath so if it ever leaks it will go into the module. I'm hoping for that class action lawsuit.
@MegaDMan23232 ай бұрын
Should not be using a jack stand anywhere except where the jack pads go.
@ReimaginedWraps2 ай бұрын
Its a good thing you cleared that one up
@squaaaad67733 ай бұрын
Hi, i need calibrate radar after removal bumper?
@ReimaginedWraps3 ай бұрын
The official instructions will tell you to calibrate the cameras that were removed. We did not calibrate it and we had no issues
@squaaaad67733 ай бұрын
@@ReimaginedWraps Thanks for fast reply!
@ReimaginedWraps3 ай бұрын
No problem! Glad i could help
@davidm67513 ай бұрын
What would a job like this cost assuming he took it to you originally and he didn’t have to do all that other repair work just a straight up window chrome delete not the grill?
@ReimaginedWraps3 ай бұрын
Prices vary depending on the car, normally around $300
@danielgarcia-vx7hn3 ай бұрын
How's it extra labor if that was your idea to go that route. That's dishonest.
@ReimaginedWraps3 ай бұрын
Its easy to make a judgement without having all of the information.
@davidleal4564 ай бұрын
I enjoyed watching and learning. I watch the comments to see your feedback and I appreciate you even creating sir. I have a 2013 Camaro that had red racing stripes that are now sun tanned into a pastel red and chipped liked crazy. I believe I may have to just pay someone for this. I will keep my options open until then. Thank you for remaining professional when people try and tell you how to handle your business it takes a grown man to share when hes learning.
@reggiehammond65084 ай бұрын
Where did you get the body kit?
@adan64885 ай бұрын
How much wrap did you guys use ?
@ReimaginedWraps5 ай бұрын
I tend to buy a total of 75ft to account for any potential mistakes. Normally a 2 door car would be covered with 65ft total however
@adan64885 ай бұрын
@@ReimaginedWraps thank you
@ReimaginedWraps5 ай бұрын
@@adan6488 happy to help!
@danielbonner83095 ай бұрын
Wow thats insane. I know theres absolute Gs like yourself when it comes to wrapping but this scares me from ever getting a wrap. Im sure they cut on the paint too. This should infuriate any professional.
@andruerodriguez8175 ай бұрын
He should have just repainted it and kept it mystic chrome. But it does look super good too though. That color paint ^ (mystic chrome) is stupid rare.
@kennethhaywoodjr56426 ай бұрын
What color is this?
@ReimaginedWraps6 ай бұрын
Satin black
@moocw116 ай бұрын
Does this look like a dark green or more blue. Would like green to show thru more
@Ace615276 ай бұрын
How did you take the door handles off?
@ReimaginedWraps6 ай бұрын
You have to remove the inner door panels and pinch the white clip to disengage it on the back of each door handle.
@Ace615276 ай бұрын
@@ReimaginedWraps you can’t just remove it without removing the door panel. Like unscrewing the bolt and off it comes then unplug it?
@ReimaginedWraps6 ай бұрын
@@Ace61527 no, the camrys and rav 4s both have this style handle that requires door panel removal. I have not found another way around it. I believe the new prius might also have this style handle.
@ReimaginedWraps6 ай бұрын
@@Ace61527 the bolt removes the key cylinder piece under the handle but not the handle itself. Most cars only require that the bolt be loosened and the handle pops right out. The new Toyotas arent that straight forward.
@Javersonarzola6 ай бұрын
Where can I buy it
@ReimaginedWraps6 ай бұрын
Metrorestyling.com
@SLG.SOSA2238 ай бұрын
is the transformer lookin ahh logo thing an actual logo for something?
@Brock_Landers8 ай бұрын
I was looking this up because my radio antenna is not working at all in my E82 128i, so I bought a used antenna module on eBay for $25. I wish I could afford a carbon fiber shark fin for my car before I attempt to replace the module. I tried to reprogram the antenna when I still had the OEM stereo in my car and it just said "ERROR" when it came to antenna part. My factory BMW Professional stereo had Bluetooth to make phone calls, but if I wanted to play music from my phone I had to use an aux cable, so I bought the double din bezel and installed a 7" touchscreen, I also swapped stereos because I have a set of Sundown Audio 12" subs in my trunk and a Sundown SAI-1750D Intelligent amp.
@Skittledikk10 ай бұрын
Cringe af.
@TheJMan1K10 ай бұрын
What did y’all spray after you filled the holes? Don’t some body work on my car then wrapping after. Also what was that spoiler looks good!
@ReimaginedWraps9 ай бұрын
We finished it with a sanded spray primer after the body work and wrapped right over the primer. Im not sure on the spoiler, this was a customer’s car
@Houstondesto9610 ай бұрын
What about the sun ?
@user-nm1vw1uv5d11 ай бұрын
Do you have a way to get in contact with you for an estimate?
@ReimaginedWraps11 ай бұрын
Unfortunately we ended up closing our doors about 6 months back. Im sorry about that, thanks for watching our video!
@MegatronPajamas11 ай бұрын
Does this fix the “Emergency Call System Malfunction” error on the dash?
@howardsun179410 ай бұрын
Most definitely not. The tutorial is on removal of the cover. You might have a damaged hardware that requires replacement.
@CDdogg30311 ай бұрын
Doing a hail repair on an X1 here in Denver, just helped me decide to not pull the antenna. Appreciate it 👍👍
@mathewshoyt1763 Жыл бұрын
detail solution and a claybar
@henrycervantes8722 Жыл бұрын
What happened to your shop man I was looking forward on coming back to get a chrome delete on a new z I got?
@denisegonzalez2993 Жыл бұрын
loveee the look! where’s the grill from ?!!
@sevynwest151 Жыл бұрын
You’re so funny lmaoo
@ReimaginedWraps Жыл бұрын
Hahaha im glad someone thinks so 😄
@BeanBarboza Жыл бұрын
do you recommend any good wrap shops in your area since your shop is closed?
@sochendasum1167 Жыл бұрын
Hi brother, i do love your job and i’m impressed. Btw Do you mind telling me the Rim specs of this car? Especially ET (Offset) and J. Thank you
@Jesus-ki3zd Жыл бұрын
Thank you!
@ReimaginedWraps Жыл бұрын
Glad i could help
@scooby101386 Жыл бұрын
FREAKING AMAZING!!!
@cunthunter Жыл бұрын
Can u steam the sticker off or just the residue
@JOHNWAYNE1920 Жыл бұрын
You do amazing work but I don't understand putting so much money in a car that is obviously trashed and in rough condition. That car has a bad repaint and obviously has not been taken care of so I can only assume the mechanicals are in similar condition. These cars are not reliable, they will have a lot of expensive problems if it a lot of miles. My only thought is you must be doing this as a favor because if they could afford to pay $5500 they could afford a car in better condition.