6 ай бұрын
Пікірлер
@robbyvaughn4450 2 күн бұрын
What color wires will it be on 2023 ? Also it looks like I’ve got 2 lines of connectors . I see just one line on yours where you are counting to what plug to unplug
@AJSWoodworks 2 күн бұрын
@@robbyvaughn4450 I’m not sure what color it would be on a 2023, I wish they would keep it the same between years. Unfortunately, there may be a different way to wire it to your specific 2023. It took me hours to figure out how to wire mine.
@itznadzii 3 күн бұрын
Nice arms man
@AJSWoodworks 3 күн бұрын
@@itznadzii lol, thanks
@benzii9331 5 күн бұрын
Hi! Love these cars. Thought I might help you track down the leak issue. I can almost guarantee that it's either your sunroof drains being clogged or your windshield seal. But I'd barging on it being your sunroof drains. Not 100% sure where they are on this car, but if you find them, you can typically clean them out by blowing them out with an air compressor .
@Tony-77i 7 күн бұрын
You're the best 👍
@znazn13 9 күн бұрын
What happens if that plastic piece broke that goes to your door handle where can I buy a new one
@AJSWoodworks 9 күн бұрын
@@znazn13 Which plastic piece?
@znazn13 8 күн бұрын
@@AJSWoodworks the plastic piece that goes to the door handle. I already figure it out. The whole door latch is getting replaced and I have to order that door cable separately and I’m reusing the door lock cable
@truemanerolle5067 13 күн бұрын
Hey would you like to sell this car
@AJSWoodworks 13 күн бұрын
@@truemanerolle5067 Right now I don’t plan to. I’d like to refurbish it a little better. Tons of fun to drive, and hard to part with.
@anniearegger1418 14 күн бұрын
Was so helpful thank you
@BeautifyTV 16 күн бұрын
Huge thank you, saved me a $500 mechanic bill.
@haydeetraver 16 күн бұрын
Do you know how much it weighs?
@AJSWoodworks 16 күн бұрын
@@haydeetraver Maybe 30-40 lbs
@irishmanphill 18 күн бұрын
i believe its an E10 torque socket for the bolts
@tmiller7129 18 күн бұрын
I cannot get the trim off for the life of me 😩
@AJSWoodworks 18 күн бұрын
@@tmiller7129 I have an updated video on my channel that may show it better. I’m sorry it’s not working for you!
@JamesAnderson-fw5ew 19 күн бұрын
I do it the exact same way on my cars but I lower it through the bottom onto a dolly. I find this also makes it easier to line up the input shaft as opposed to using a jack
@amysheetz3031 19 күн бұрын
Forgot to mention that I have a 4 month Golden Retriever and she is my first larger dog! Subscribed!
@amysheetz3031 19 күн бұрын
I bought the same brand but smaller and I am buying the large because of your great review. I especially appreciated how you can pull the hair out in a clump! Thank you!!
@play.brz86 20 күн бұрын
Nice update video and glad to see the Accord is still with you!
@play.brz86 20 күн бұрын
Did you ever end up having to modify the exhaust or HFP rear lip to fit the exhaust?
@AJSWoodworks 20 күн бұрын
@@play.brz86 I did not, but the hangers had to be adjusted
@play.brz86 20 күн бұрын
@@AJSWoodworks Thanks for the info and super helpful videos! Super happy to see the Accord is still with you in the recent update video!!
@GameHEADtime 23 күн бұрын
How’s it handle winds on that?
@AJSWoodworks 23 күн бұрын
@@GameHEADtime We’ve had some pretty bad storms over the years, and never had damage.
@GameHEADtime 23 күн бұрын
@@AJSWoodworks do you know if it will move or fly away if I order it and place it on dirty temporarily?? Just wondering I can’t mount it to the dirt or anything or add something to mount it.
@AJSWoodworks 23 күн бұрын
@@GameHEADtime It shouldn’t just fly away unless you have 50 mph winds or something. It should be fine until you figure out a base or put things inside it.
@GameHEADtime 23 күн бұрын
@@AJSWoodworks thanks !!
@TrataTas 23 күн бұрын
Im looking at honda odyssey 06 automatic... 🤔 what did you do with ABS module?
@AJSWoodworks 23 күн бұрын
@@TrataTas mine is a manual, so I did not have to worry about it.
@tcoe1970 24 күн бұрын
Hi, went through and replaced intake and valve cover. Great video easy to follow . I am working on a 2105 Buick Encore and my oil cap does not fit?
@AJSWoodworks 24 күн бұрын
@@tcoe1970 that’s odd. Must not have the valve cover lined up. Acdelco brand?
@tcoe1970 24 күн бұрын
@@AJSWoodworks Dorman valve cover 264-968
@tcoe1970 24 күн бұрын
@@AJSWoodworks i used a Dorman valve cover part no. 264-968
@AJSWoodworks 24 күн бұрын
@@tcoe1970 Mine was somewhat tight, and required harder twisting, but yours might be worse.
@tylerpastorius4859 14 күн бұрын
@tcoe1970 did u figure out which oil cap fits the dorman valve cover?
@ACAMPS.HITHOUSE 25 күн бұрын
One thing no one makes clear is if you just wanna charge a battery to turn the on button just hook up the cables and hook it up to an extension cord and it will charge slowly
@beanoldboy 25 күн бұрын
Your hands are too soft for me to take you seriously....
@tieudao3366 27 күн бұрын
My car was good before i do the Stereo CarPlay upgrade then some how I can’t start my engine. When i put my key turn to ignition I, II is ok (have power like radio) but when i try to Start the engine the whole car shut down no power, no crank, no nothing then i put brand new battery in the car and it’s do the samething. PLEASE! Help me SOS 😢😢 i only have one car to work. My car is 2008 Honda Accord EXL. THANKS 🙏🙏🙏🙏
@AJSWoodworks 27 күн бұрын
@@tieudao3366 either your starter is bad, or the wiring of your stereo is draining or short circuiting your battery. A new battery should temporarily fix the draining issue though.
@tieudao3366 27 күн бұрын
Everything work fine until i install the carplay upgraded and i did buy another new battery. I put the key in ignition I and II it fine then try to start its shut down the whole car power. Do you know where is the start relay fuse locate? For 2008 honda accord? Thanks
@ImDanny916 28 күн бұрын
I’m wondering what i did wrong. I followed this video. I replaced my serpentine belt and now my AC doesn’t work.
@JayVanWetering 29 күн бұрын
Thank you for this video. Very helpful .
@lxfiveoh 29 күн бұрын
Just picked up a 2011 Honda Accord with an identical headliner stain (but on the driver side) and am going to try this! Nice work.
@trumetta 8 күн бұрын
Did it work ?
@redorange Ай бұрын
How is the Dorman intake manifold working out? Have you had the same issue? I’ve read mixed reviews on it as far as fixing the problem the issue.
@AJSWoodworks Ай бұрын
@@redorange I’m not sure it fixed all of the issues, but it did seem to run better
@toddhawley5840 Ай бұрын
Thankyou sir
@dylanharris5320 Ай бұрын
Very clear and concise. Thank you!
@james_8554 Ай бұрын
I have been staring at the parts for about a week. I needed this whole video.
@anthonywells733 Ай бұрын
Mine leaks … after a hard rain we have puddles of water to the left of the door and in front of the right side door. Trying to come up with some way to seal the doors when there shut.
@AJSWoodworks Ай бұрын
@@anthonywells733 You could attach a rubber weatherstripping to the sides of the doors where it comes in contact with the wall.
@MM-sq5pf Ай бұрын
So was yours bad?
@AJSWoodworks Ай бұрын
@@MM-sq5pf it was
@extremetv2024 Ай бұрын
Cool I have the men's edition for sale in great shape needing the tires and inner tubes 😢
@jinsestephen Ай бұрын
Thank you for sharing the video
@JasonBourne119915 Ай бұрын
Thanks man, knew the location but appreciate the video!
@jinsestephen Ай бұрын
Actually my car got the same issue .
@johnmarcustaylor Ай бұрын
Bolt seemed to take 15mm socket but was welded on so tight it wouldn't budge and then stripped when i used my drill.
@AJSWoodworks Ай бұрын
@@johnmarcustaylor if you had a shop change your oil previously, they probably used an impact driver to tighten it. I never use impact drivers or drills to loosen anything or tighten anything if possible. A good, long handled wrench or a steel pipe slid onto a wrench will prevent a lot of stripped bolts.
@kentryan8752 Ай бұрын
That motor sounds rough.
@AJSWoodworks Ай бұрын
@@kentryan8752 Yeah, didn’t run great either. Can’t recommend against getting one enough.
@JamesDeni Ай бұрын
Did the same thing to my 07 accord sounds really good
@Psp-id7uw Ай бұрын
Switch to white wall tires.... Install voilamart diy ebike kit lol
@cometpowell Ай бұрын
What were the symptoms that made you change the gasket?
@AJSWoodworks Ай бұрын
@@cometpowell I had to remove the intake manifold for another repair, and so replaced the gasket as I was disrupting its original seal.
@ITubeUser23 Ай бұрын
Not sure if this has been mentioned already but check your sunroof, it could be the cause of your leaks. Different car but it was happening on my 2015 civic si
@jessicabergren9230 Ай бұрын
I have the same one, and every time is fully and charged the battery dies away.
@limpy88 Ай бұрын
Thanks for posting.
@alexthepanda2058 Ай бұрын
What has everyone else used for replacing the flywheel which option did yall go with
@pjkf01 Ай бұрын
I'm in the middle of this and I went with LUK.
@jerome5021 5 күн бұрын
Just installed the clutch and flywheel, hopefully going to finish this in the next few days. I went with luk for the clutch and the flywheel. As far as I can tell they are rebranded oem. They are visually the same as the ones I pulled out of the car which supposedly had never been replaced.
@Juicesquaredchevy Ай бұрын
We’re would I find the computer pin out identification for earier year Silverado models?
@AJSWoodworks Ай бұрын
There are manuals on the internet regarding the pin locations for basically all year models. No great single website unfortunately.
@Juicesquaredchevy Ай бұрын
@@AJSWoodworks part numbers for chassis side harness? Can’t seem to find lock and unlock cables
@iamnoesilva Ай бұрын
I have a 14 cruze with 43,000 miles on it, i just had the turbo, wastgate, water pump, thermostat, bunch of lines all replaced and just had the same code come back again, turbo underboost, i just bought a new valve cover, manifold and the hose you broke, going to replace it this weekend when i have a few extra days off. Had the car a year since 32,000 about tired of it already lol.
@AJSWoodworks Ай бұрын
Good luck! So many things go wrong on this car that you’ll get good at fixing it!
@RodHammer888 Ай бұрын
Check to see if your turbo is covered by the recall. I would submit it for reimbursement
@iamnoesilva Ай бұрын
@RodHammer888 it was all covered under my warranty. I bought the car last July and somehow got a 3 year 36,000 mile extended warranty with it. I've only had to pay for my deductible $100 out of my pocket. I'm tired of the dealership having my car for a week + is the only reason I'm doing the valve cover and manifold myself or else I'd make them do that too.
@michaelsutton3032 2 ай бұрын
Thanks bro you a real one
@chrizze5062 2 ай бұрын
Please keep this car and update us on whatever you do to it 🔥🔥
@AJSWoodworks 2 ай бұрын
My wife wants it gone, but I’m holding on!
@LP-ok9rl 2 ай бұрын
I truly want to thank you for showing me all the extras like the connections in the back. And also being safe with the hoses thank you again, great video.
@FishingDucks 2 ай бұрын
Can u stand up in it
@AJSWoodworks 2 ай бұрын
Yes, although it’s not necessarily made for that
@FishingDucks 2 ай бұрын
@@AJSWoodworks thank u