91945punx

Пікірлер

@tannerphillips4456 15 күн бұрын

I had this same problem where it was leaking from these ports. The top housing is entirely removable, and you can remove it all the way and plug the hole like the bottom so it’s not leaking from behind the housing

@jayber5941 18 күн бұрын

Thank you so much for this video!! Saved me from having to get a new one!!!

@TheCraftyIntrovert 22 күн бұрын

Thank you!! You save the neighbors having to listen to a lot of cussing.

@MathewWeaver73 Ай бұрын

Didn’t work

@JoanRoss-ud9rx Ай бұрын

Thank you!! You’re the best!

@bingfischer9679 Ай бұрын

There is a one way valve on the bottom hose and it can break. Dont plug that off.

@lmphashby Ай бұрын

I can't believe I just ran across your video I had the same thing happening the thing is how do I get the water out of the air Chambers

@jeannettesachs3053 Ай бұрын

Can’t get the screw out of the top piece. Now it’s stripped. Do we know the function of this top piece or can I just wreck it and patch the hole with JB Weld?

@themaddmoeshowgermanshepar1627 2 ай бұрын

...thank you for ti's video, doing mines right this minute

@kimwerner2187 2 ай бұрын

So now that we know how to fix it how do I get the trapped water out?

@Kfjfjdjdb 2 ай бұрын

Thanks for the video. Very helpful

@khazoury 2 ай бұрын

That works but now the airport has a water leak. Ugh

@TheRawdaddy 2 ай бұрын

Thank you. Exactly what I was looking for.

@e-roc6703 2 ай бұрын

This is a life saver I was just fixing to drag the ol thing to the road but was holding out hope and here it is. Thank you for this video! To those asking about the water in the walls I had to open all the drains, the one on the botttom, and flip the jacuzzi a couple times and step the water out of it. Finally got basically all of the water out.

@kapaxian 2 ай бұрын

how did you get the water out of the walls? Mine weighs a ton now!

@kapaxian 2 ай бұрын

Just saw the post about the air vent nozzle unscrews. Success!

@carriesanford7154 2 ай бұрын

So I did what you did but the top one is still leaking air from behind the valve. Is there a way to fill it in behind the hole. Is that what you had to do or no?

@leyburne1 2 ай бұрын

Thanks for the fix! I plugged the top and bottom holes but found it was leaking around the outside of the upper “vent”. I put some Marine JB weld into a syringe and pumped it around the perimeter, no more leaks 👍

@psrsscott 2 ай бұрын

How do u get the water out of the walls to heavy to pink up

@eddyacevedo5089 3 ай бұрын

Well thought it a little Riscky but did it anyway and sealed those suckers just like this said and Guess it works.🎉😊 I usted silicón.

@JimMeyerTheFirst 3 ай бұрын

What is the function of the vent-looking part on top? I'm about to undertake this fix, but I don't want to plug up something that might be important... From the location, my guess is that it's an overflow drain. And... thanks for posting this!

@theRickLC 3 ай бұрын

Same problem ... it appears to be similar to a bath over flow drain. Except the overflow is routed thru a tube back into the bottom of spa. I am assuming this tube has disconnected and water is now filing the walls/air pocket and the air is escaping thru the ports where the tube was connected. Also, since this tube is inside the walls/air pocket there is no access to repair, reconnect or replace. An expoxy plug at both ends appears to be the solution.

@anitawatts2341 3 ай бұрын

Can anyone tell how the shaved the thing on the upper port

@DontBeSickOFit 3 ай бұрын

did the same thing today! Thanks!, Don't be sick of it!

@amykanai851 3 ай бұрын

Thank you for the instruction! I will fix this today. I had trouble getting the water out of the walls until reading comment replies and understanding that the air valve can be completely removed by unscrewing the second ring.

@TimLenhartTech 3 ай бұрын

We will get a few more months out of our spa thanks to your video. I took that cover off and stuffed the hole good and full of muffler weld. All's well now.

@JamieMurphy-eu5bq 3 ай бұрын

Thanks for the video. Trying this as well. JB well is curing.

@JoanMarieOnnagan 3 ай бұрын

So my main question is how do i get the water out of the walls???? Hellppppp

@5tmarc 3 ай бұрын

Thank you buddy!

@lilliangonzalez4896 4 ай бұрын

How did you drain the walls?

@brandykay2644 4 ай бұрын

Unscrew port you put air in and turn hot tub on its side. Water will drain.

@rehorm1809 4 ай бұрын

Thanks for such great information. Should I put JB Weld on the back of the top piece too?

@rosettasimmons6348 4 ай бұрын

I had the same leak from that top hole. You could hear the air coming from it when drained. Today I plugged it w JD Weld and shaved the stem down. Tomorrow I will blow it up and test the leak. I didnt do anything to the bottem hole. 🤞

@hornets303 15 күн бұрын

Did it work?

@ChrissyWilson-lg2wl 4 ай бұрын

So after you did this an filled it up did it stay inflated..an the filter system worked fine ?

@news435 5 ай бұрын

Just did this repair. Used JB WaterWeld. Note: that top plastic piece is removable. After removing the screw, just wiggle it out of the hole and patch it like the bottom hole. Image here: i.postimg.cc/Rh75JFxc/IMG-2211.jpg

@amyrenee9165 5 ай бұрын

How do you get the water out of the walls?

@pierre.alexandre.garneau 5 ай бұрын

I used a Shop-Vac for hours where the hole is.

@DLWang 5 ай бұрын

Thanks! Didn't know about the bottom one

@mizer89 6 ай бұрын

What was the best way to drain the walls after water got in? Planning on sealing but want to drain first.

@cindyrider2006 6 ай бұрын

Someone further up mentioned unscrewing the air fill hole.

@dallasriffle 6 ай бұрын

Add my name to the list… same story, walked out one morning and was collapsing. Didn’t realize the walls were filled with water until I drained the tub and still couldn’t lift it. This video was very helpful. Draining the walls now and hopefully can implement your fix. Thanks!

@psrsscott 2 ай бұрын

Are u adding air in to drain the water

@EMB-tl6mi 2 ай бұрын

can you please explain how you drain the walls?

@kristabruner6298 6 ай бұрын

How did you get the water out of the walls? Or did you leave it and fill the holes

@natashacash1018 6 ай бұрын

The valve on the outside near the bottom where you pump air into.

@hollywood1836 6 ай бұрын

Will this also cause a mysterious water leak from somewhere? It's a very small amount and can't figure out where it's coming from

@PortalDeConciencia 7 ай бұрын

What are the purpose of those holes if they can be sealed ? I dont understand why they make them if we can eliminate them ?

@valentynp 7 ай бұрын

Thank you it fixed my issue as well no more leaking. But now I have a leaking pump.......ohhh these hot tubs are cheap for a reason.

@playjayramirez 3 ай бұрын

Try loosening the screws and retightening them. This helped me. Simple fix but if you don’t know that’s your problem it’s hard to figure out otherwise.

@joellenpowers8278 Ай бұрын

Same problem. My pump is now leaking when i turn the heat mechanism on. What screws should i loosen? @@playjayramirez

@andrewlutz5274 8 ай бұрын

Your a good man. I’m going to grab some jb weld right now

@MunchieMan123 9 ай бұрын

Does anyone know what this thing does? (The one on top)

@louisefaison3264 9 ай бұрын

Couldn’t keep air in mine I hope this fixes my prob. Tnks

@bonniemiller8776 9 ай бұрын

Thank you! After much frustration… your method worked!

@TITANN-117 9 ай бұрын

I just had to do the exact same thing to my hot tub. Unfortunately the instructions don't say anything about horse play in the hot tub I think that's what damaged ours🫣 we've had ours up 24/7 for almost 3 years now. If I can make it through one more Montana winner I feel that I would have gotten my money's worth. Unfortunately I watched your video a day late but we both came to the same conclusion. Thank you for posting the video to help others.

@shawnmckenna5435 9 ай бұрын

Does the filter still work?

@darrisdoois2354 9 ай бұрын

I just did the same fix. Thx. Only thing i will add is, mine kept leaking from the upper thingy. I pulled it straight out and filled the hole behind it with a water proofing "kerdi fix" and pushed the cover thingy back on.. still not sure what the function of the upper thingy is. But it aint gonna fo anything anymore.. cheers

@Jdizzle108 9 ай бұрын

Also, does anybody have any idea how to get a replacement inflatable tub?

@Jdizzle108 9 ай бұрын

Is it possible that I inflated my spa to fast and screwed up the inside? Mine seems to be leaking air from behind the filter. It will not inflate. Any folks out there have this problem? Or any idea if it's fixable.

@TITANN-117 9 ай бұрын

You'll have to remove the small Phillips screw inside the purge valve case that's underneath the filter. In his video he shows how to twist it sideways. I just use a vinyl patch with PVC cement and it worked perfect .

@paigehanson8284 9 ай бұрын

I just put JB Weld in these two locations and it seems to still be letting out air slowly. Can not find a hole anywhere!? Any other suggestions?

@TITANN-117 9 ай бұрын

Patch over the bottom one will work and then use aquarium grade silicone around the entire top one that will help seal it.😊

Ең жақсы KZfaq

Пікірлер