If you can direct me to where I can get the sysex files 4 version 2.0 so I can install them on my version 3.1 unit along with instructions. I have Google but when I find a link they are dead I would also want to know if you are interested in selling one of your lexicon MRC's I would be willing to pay you well for all of this i'm asking for..

Did you had problem with weight on keys? That glue went out and need something to clean if off. If you have sysex I might need your service when I run out of sounds

FYI the Stage 2 used Eibach Springs and sways, not coilovers. My IS is Feb 02. I was visiting all the dealers than sold Ltunes back then and was a member of the My.IS website forum and all we did was talk about the car. They were specifically Eibach relabeled springs, and the sways. Also TRD was behind Ltuned. I mean it was basically Lexus's version of TRD. Here in LA I still see them here and there. I found a body shop here the other day that looks brand new and Im gonna have them repair my front bumper and rear and make a video one of these days. But I love this one.

I know this is 6 years old but nice to see an L-Tuned on youtube. I have an 02 and I was one of those conversion L-Tuned. My guy at South Bay Lexus got me the body kit with badges, I got the mats later. Had the exhaust already as my first purchase for my IS. Somewhere in the original months I got the Eibach springs and sway bars that Lexus used for stage 2. Then later got not 1 but 2 sets of Rays SS7 wheels. So I have everything except for that badge on the dash. Mines has a recently replaced and painted hood so it looks pretty good. But my Ltuned front bumper and rear valance sit in the garage. They need some paint. But rolling around with just the sides and the wheels in blue by the way, it still gets a thumbs up look here and there when I do pull it out the garage here in LA. I stopped the video when you mentioned doing your sides (6 years ago I assume). I remember redoing mines with the 3M heavy duty. I swear I did a way better job than the original installer I used. I did mine probably 18 years ago and they still are on there strong as day 1.

really appreciate the video. i wish more people would go this indepth with a restore

Hi - Excellent Video! ...shot in the dark question... does anyone know what is necessary to upgrade firmware on this keyboard?

Ive got an issue with mine,no sound from the main outs.. The headphone jack works but its low and if I press the keys hard I get distortion, the distortion goes away if I turn down the main volume knob but then I can hardly hear the synth at all..

great video. just wanted to get some thoughts. Mine powers on "normal" occasionally (shows OS version etc). but most of the time the LCD is just a top row of bars. Anyone have any good pointers where to look? Battery is good. voltages are good.

I've been trying to do this same repair with no success. Unit had very low output. I replaced all the surface mount caps on the main board, then got no audio at all. So I replaced all the caps on the jack board, and now there's a sawtooth hum on the left output. Still no audio from headphone jack or the right channel. I have experience soldering and doing cap replacements. I've never had issues like this. Does anyone have any ideas?

I had that problem with mine, and replaced one cap, that was keeping the audio from working. I hope I don't have to replace the other caps, but if I do, I will. Bought it when it first came out, and have enjoyed it ever since. Thanks very much for this guide and have a great day 🎶🎹🎶❤️

How can I search for the mesh that holds the fog lights on that bumper?

Here from your reverb comment. Thank you for your efforts

Thanks for this. I just acquired this model. The previous owner said it would need a new belt. I haven’t powered it up yet I was too intimidated. I was picturing something way more involved. This looks easy enough. Thanks for the video!

My MC 303 doesn't turn on!! I have tested the power source and it has power OK, but I get the impression that there is a problem with the on/off switch. I can't find an electrician who wants to take responsibility for checking it (too old fashion machine!) ....... any tips? or video you can recommend?? thank you very much!!

Using Roland Cloud has been brilliant, all JV1080 functions easy to access on UI and all the SR-Boards - use straight in the DAW ----- BUT ----- I still look at the industrial black box and want to buy one just cause it looks so cool imo

IT came out of the stand in 1997,that year i listen to it in a store music in Montauban,but because of the price more than 2500 $ i bougth an Harmonica!!so i wait till 2008 FOR buying one!!to a german punk group!one ic were broken and it was a simple side,so i resold the tracks with electric wire!!!!so i resold it after!so if you got a JP 8000 resolding it's certainely this one!!

I went through the full recap process after watching this video several times. I had a couple pads come off and did my best to graft. The board will semi - boot. I get backlight and the "R" on the screen and then all the text goes away. No sound either. Anyone with experience willing to service the board for me (paid) or offer some troubleshooting?

Very helpful video🙏

🥰

I don't know if it existed when you created the video but nowadays there are very cheap SCSI to SD solutions like Blue-SCSI either version 1 or 2.

Nice work! On mine the +12V is being pulled to 0, until snipped and then it's fine... any pointers?

I have two of these. The first one failed some months ago, and since it was still in warranty Polk sent a replacement power supply board. That solved the problem, but it never sounded as good as the original did. And then yesterday, the second one (which I use with my computer) died. Before its death, that one sounded incredible. I must have had it very well adjusted for that environment. Consequently, I am done with this and have bought a non-Polk replacement for the computer which should arrive in a few days. Perhaps I will try to replace caps on the dead ps board, but I find that the time required to procure parts, dis- and reassemble, and swap parts is probably not work my hourly pay rate. So more than likely, this second dead subwoofer will just sit around unusued until I can work up the nerve to just dispose of it. On the other had, it does have a perfectly good driver and could be externally powered. Maybe that's good enough reason to let it clutter my space a while longer.

Anyone know where I can get the capacitors????? Ready to do a restoration on mine 🙏🏾💯

I just got a QS6.1. This is so helpful! Good image quality, good viewpoints and detail shots. And some handy explanation as well. Thank you!

great stuff!

Oh wow. First of all, thanks for sharing all your repair knowledge with us [common humans]. My XP-50 needs the same personal treatment from you. How can I contact you?

I have a 2500R where the F/I switch always releases. I Suspect an error current, but i cannot measure this. Do you have a suggestion what the cause could be ?

great video

Great video! Anyone that’s got the schematics pages that’s missing in the online service manual. Page 40-41

I have this keyboard and the programming unit that is not shown here. Never used it. It is like new. I wonder what they are worth today.

Everyone talks about The "Tiled Room" that is in Rev 2.2 is there a way to add this room to the 3.01 version. I have that version. If everything is full, then maybe deleting something?

Hi Brad, what size O ring is needed for the auto return mechanism for the sl1700 mk2. ?Thank You. Dennis

My favourite Technics turntable, easier to repair than the SL-1600mk2 as all the electronics parts are still available.

AJ-1s always seem to have broken plastic on the back. Also, their keybed circuit boards are prone to corrosion. Backlights are spotty on both models. AJ-2 build quality is much better. Pitch bend is often broken, and the plastic "hinge" on the pitch bend mech will eventually crack. Always wise to rebuild the power supply. AJ-2 is a little harder to work on as the main circuit board is tucked up inside under the keybed.

thank you sir for this video, much appreciated and it save me 200 bucks at a repair shop🤟👌

i assume i can replace both rectifiers with the overkill version?

Can have a dbx 160A repair

I need to report this. I just took down pages of notes from your video in order to start the work on an XP50 that canme to me, no screen, no output. I put it on my bench tonight and turned it on to see the symptoms. The LED screen came alive with patches, numbers, etc.. And it sounds like a million bucks, big rich wide stereo tones. I'm kinda baffled. It had been dead in the water from the owner and something happened that brought it back. Well, at least for now. I'm sure those capacitor are getting ready for a cat pee fest. Thank you for this really good video.

Hey Bradthx, cheers for this video. I've got a jv1080 that has no sound unless I quickly turn the power on and off to where the screen doesn't go black during power cycle, and some of the waveforms (not all) are distorted on playback. Inside looks really clean, but I'm about to inspect it. Any chance you could know what might be going on?

Super great video. Thanks a lot!

Sir good day , can i buy the power module of that keyboard plsss or else where to buy??

No sound whole keybed, hooked up external midi keyboard and still no sound, what am I looking for? although I didn't open yet, maybe voice chip?

Olá, parabéns pela qualidade do vídeo e principalmente pela qualidade de seu conhecimento e pela espetacular ajuda que prestou a todos que tem um belo exemplar do Xp50. Eu acabo de comprar um xp50 usado, com defeito. Ao ligar, o display acende sem caracteres nenhum, não existe som, não existe nenhum led de botão. Esta morto. Apenas acende o display sem dados. Irei substituir todos os capacitores da placa, mas você arriscaria um palpite do qhe eu posso verificar pra entender porque ele está morto? Obrigado

I just got a beat up Alpha Juno 2 and it has the exact same wire. Mine was totally severed. Not the most thoughtful part of the design haha

What do the three tiny miniswitches on the digital side of the board do?

I'm angry at myself I've sold mine.

Compared to AKAI’s previous samplers like the 1000, 2000 and 3000 series, the S5000 and S6000 were a massive Relief, Finally a sampler that could do what other samplers couldn’t: 256 Mb of memory doesn’t sound like much these days, but it still enabled you to record 3 minutes of 16-track recording at 48 KHz, and if that wasn’t enough, the virtual sampling feature with recording Directly onto the harddrive was simply Unheard of in those days, and it left AKAI miles ahead of its nearest rival, the Kurzweil. USB connectivity, 16 channels, 128 voice polyphony, the option of putting in a HD really put the S6000 at the Top of the wishlist for many recording studios. And the sound quality, well Nothing beats the AKAI, not even now. The difference between the S5000 and the S6000 was that came as standard in the S5000 were optional extras in the the S5000, which was basically a cheaper starting point.

Brilliant video! How does one contact you for repairs?

JP-8000 Problems 🤷‍♂

Super JV 1080 é um mostro no palco e estúdio, uso hoje diariamente, co excelentes resultados. ARNO MACEIÓ ALAGOAS BRASIL