hey where did you order the harness from? I cant find an actual metra dealer that has it.

Thank you!! I was starting to freak out about my car. I was ready to get it towed to the mechanic. Thanks again!

Thank you for this video. 🙏🏻 Do you know where to buy the bulbs? Thank you so much.

Please get yourself a fresh marker before your next video!

I haven't seen any modern cars that don't have a plastic intake plenum. The button is to turn off the forward collision mitigation system.

Yo I bought the exact speakers for this car lol

So how about a update on how it held up because you said prep was everything you did not remove the clear coat on most of the bed

This changes the oil right?😂

Yeah that’s wrong because the fan doesn’t just come out, no direction showing how to remove the fan

Thank you sir!

62824 🎉 Yoursolution was perfect as Ineeded to access the windows switch to apply power to raise the windows. Thks

Tried the wheel thing , does not work ?

Trying to surprise my daughter and fix her rear blown speakers today! 2015 Toyota Corolla S. No need to add an amp for these 6X9 Kicker correct? Car Toys mentioned that a speaker w/higher amp rating than the stock ones would need an amplifier and if I did that then I should consider upgrading the front speakers as well for continuity etc. Any help welcome today!!! Thank you!

Is that the new Wonka Vision box in your truck bed? 😁😉😉

Great video and great job in explaining! Camera work is great! In frame and not jerky! Concise explanation! My truck is 1998 so there's a little bit of a difference. I'm just replacing my stock bulbs with an led set. Thanks for the video!

It’s a truck not a car 😂

Bro is a lifesaver!!! Love your video. No bullshit music, just great information. Just change both windows in my 92 chevy. 👍👍👍👍

Thanks for the info, but you know all that chemical crap ends up in the local waterways with the next rain right?

eaaist install until the controls. what horrible design i broke all three pos

thanks for the video. my corolla 2006 has the same aiming setup. but on the side of each lamp there's also another aimng screw, is that for horizontal adjustment?

Fonky! This worked!

I just used it on my nerf bars. Hoping it hold up.

The recalibration works on my ml500…however I have to do the recalibration often because the EPS-ABS warning pops up more often now. Sometimes several times per day.

Thank you!

Thank you!

Nice sound, got a magnaflow rumble exhaust for mine! Its a 2000 Subaru Outback. I want to pair it with UEL headers this summer. Thanks for the video-WS

bought an obd scanner for "nothing" than I guess hahahaha

Want to replace your water pump pulley? Then do this. Ask me how I know. I'll tell you when I get back from buying a new one.

It's NEVER NEVER NEVER the gas cap. Nor is it the evap can or the solenoid valve. It's usually one of the numerous hoses. Once they dry out, a pinhole will develop and that's all it takes to pop those codes.

Hi, yesterday I was talking to a friend om the street and I left my car running for a 45min to 1h ...totally ignored it because i was outside of it next to the car just talking to a friend and after that time all the esp bas and abs lights turned on. I was confused because all of that happened after that 1h of talking and letting it idle. The moment I saw the lights I kinda panicked because its the first car and I am still learning some things. Now I have no idea if that is direct problem or what was it...I have a feeling that it must be it because there is nothing else to be possible since my battery is new and all the other stuff is good. If anyone can help id appreciate it.

Thank you

2:27😂

Talking about the automatic not being worth as much as one with a 5speed. Screwing a tachometer to a mint dash certainly doesn't increase the value either. The dash sells on Ebay for 500 to 900 dollars if they aren't cracked or hasn't had something screwed to the dash

Can you show me where the other side of the hoses attach

Can the esp cause a no crank no start issue?

@biggirlsgarage, stop misleading folks

Anyone know where to buy those white clips on Amazon?

Before removing the door paddle, there is a screw behind a switch panel that you didn’t mention so you got two Philip head screws that you have to remove ones on the armrest and one is behind the switch panel because I broke mine. Also, the screws are 7 mm socket.

nice work - great job on the video as well. Going to buy a gallon and apply to the 18' Tundra I just bought as the bed is really scratched up. thanks for the info!

I 😊😊followed your instructions and my Mercedes Benz S500 started. I had to just it the Battery was Dead. So after charging Everything Worked except it would start. Thank You. Thank “GOD” I didn’t have see the work shop tonight.😊😊😊

Dear lord that is a clean engine mine with 240K and a slight leak of power steering fluid (which no doubt exacerbated the wear to the belt) is dirty. My belt broke Friday (sounded like skittering but then the power steering shut off and the alternator light came on and the heat came up) and had to park it (luckily in a nearby Police lot) on the way back home since it was overheating. Came back in the morning with the belt. Pieces of it were wrapped around the pullys here and there. He's right about the passenger side piece of cowling, removing it made it much easier to get the belt under the bottom pullys. NOTE: There is very little room between the tensioner and some metal dealio so your socket set up needs to be thin. I needed someone else to pull the tensioner bar while I put the belt on. A pickle ball player passing by totally committed though saying he knew nothing about cars. I offered him gloves but he went bare handed and then pulled the socket off the tensioner for me as I decompressed. I didn't mention my girlfriend watching a baby and it being about 100 degrees. Anyway thanks for the video and to the guy that drove off in his Porsche. My TSX is running like a champ again.

Front door is different.

سيارتي المفضلة دفع خلفي

Badass☆☆☆☆☆

I’m assuming you need the window down to do this. how do I get the window down if my motor is bad, to even do the replacement

Thanks bro

I appreciate your efforts, buddy. But, I am left with the impression that the names don't mean much. Toyota's fault, not yours.

I have the same problem in this moment, but my car is giving this ESP signal and in the same time ( while I am driving) the car is stoping, all by itself, and it feels like something is scraping. I went to the workshop and I turned off the censors, it was ok for a while.. the esp indicator poped up some times but it didn't stoped the car like before. Today I started the car and it poped up again and it bloked the tires while I was driving.. it is so wierd cuz the censors are turned off... pls help

Great video! How soon did you remove the tape? Did you remove it before the Herculiner was dry?

Зачем ты испортил патрубок???? В него просто нужно было поставить пружину, он бы ещё работал много лет Прежде чем что то делать, а уж тем более показывать это людам, изучи полностью предстоящий ремонт