8 ай бұрын
Пікірлер
@Tsukuu_ 15 сағат бұрын
gimmee the range test with duality's brother please.
@colibrifpv 3 сағат бұрын
@@Tsukuu_ Hey there, absolutely, I've already done it, I just have to edit the video. Spoiler, the range is way better with the Dualities, these are basically TrueRC antennas and they are awesome for long-range applications...
@AnthonysHobbies 18 сағат бұрын
Is it under 250g? If it’s over it does it come with remote Id?
@colibrifpv 16 сағат бұрын
No unfortunately, on both counts
@AnthonysHobbies 14 сағат бұрын
@@colibrifpvis there a cheap remote id option? I don’t want to spend $200 on a module, is there like a solder on one?
@colibrifpv 3 сағат бұрын
@@AnthonysHobbies The closest thing I know about is called DoneTag BS, it's under $100 and is super lightweight. Unfortunately, there are not a ton of great options. Here's the link: dronetag.com/products/bs/
@AngerFPV 21 сағат бұрын
The fact my nuzgul didn’t come with gps and this did is the BIGGEST fuck you iflight could have given.
@colibrifpv 20 сағат бұрын
Hey there my friend, GPS is an add-on, you have to select it and it costs extra when you order, but if you already have your drone you can add it, just buy a GPS unit and the mount!
@ciprioltean360 Күн бұрын
@colibrifpv i need your help further with this drone. i ordered all the parts you are using in this video, yet i need help with the FC & ESC … I have the same Argus ones, yet i might be missing something when i build it (at the connections level). could you please perhaps email me a couple photos of your final johnny fpv v2 build? I would very much appreciate. I am still sort of a noob at building. thanks.🙏
@colibrifpv Күн бұрын
Hey there, that would be no problem but unfortunately I'm on the road and don't have access to the drone right now but I would be happy to help, you can email me at the email listed for this youtube channel. Basic advice: take your time! Your first build has a steep learning curve, but it gets more fun later 😉 Practice soldering! Buy a cheap practice board and practice. Also watch Joshua Bardwell's soldering tutorial. As for your FC connections, plan first on a piece of paper, ie, TX1 on receiver (yellow wire) to RX1 on FC... I just made that up but you get the point. Good luck and once again, take your time!
@Tsukuu_ Күн бұрын
betaflight 4.5 preinstalled? hmmm just got 4.3 of evoque version.🤔 not cool man 😅
@colibrifpv Күн бұрын
Mine had 4.5! If I recall, Betaflight 4.4 had major GPS issues with M10 GPS units, so they waited for a long time before upgrading and leapfrogged 4.4, which is why they shipped a lot of quads with 4.3, it was the solid version for a long time. The good news is that iFlight does publish their official Betaflight configurations, check out their Facebook group or e-mail their support, they will get you sorted...
@AngerFPV Күн бұрын
Xl5 wit the analog all DAY shawty
@colibrifpv Күн бұрын
Can't go wrong with a prebuilt iflight ripper at that cost 🤘
@chunkit78 2 күн бұрын
Do u have problem with GPS locking satellite?
@colibrifpv 2 күн бұрын
Hey there, nothing major, although when I fly for the first time at a new location, it can take a minute or two. Also, every now and then the GPS will not be recognized at all, but when I unplug and replug battery (restart FC), it works normally.
@chunkit78 2 күн бұрын
@@colibrifpv Sometimes it takes like 5-6mins to lock and I have tried restart FC , it doesnt help. I think the placement of the GPS is not ideal. My cb25s and manta36 with cheaper GPS locked really quick at the same location with nazgul eco. I think everything is good about this drone but not the GPS
@Kellis6 2 күн бұрын
Just got the o3 version for my first 5". Its very fast but i havent found a place to really open it up yet. I disarmed on accident about 20ft high at 25mph and it was not damaged at all.
@colibrifpv 2 күн бұрын
I hear you, it's hard to find a nice open space to fly such a fast quad safely. I've also disarmed accidentally when something goes wrong because it's like a panic instinct in me. Just head out to an open field and take your time, have loads of patience and you'll have a blast with it. And if you haven't already, spend some time in the simulator. I'm not a gamer and playing video games at my age doesn't come natural, but the experience served me well. I love this quad!
@Offroad_Airscapes 3 күн бұрын
Nice review mate👍 answers alot of my questions i had about this
@colibrifpv 2 күн бұрын
I'm glad to hear that, thanks a lot for watching!
@colibrifpv 3 күн бұрын
Check out the Nazgul Eco: Nazgul DC5 Eco (DJI O3 Air Unit) 👉 bit.ly/EcoDC5 Nazgul XL5 Eco (analog) 👉 bit.ly/EcoXL5
@Versillio 3 күн бұрын
I just received the DC version with ELRS and GPS. It’s ready to go for a maiden flight but too much rain in my area. I wish I got the XT60 loose lead version, the captured version I got is a pain, and now I have to get a 2-inch extension to maintain battery balance. Price wise it was about the same as a custom-built quad but without the work of doing it yourself. Hopefully this is the start of new trend.
@colibrifpv 3 күн бұрын
That's awesome that you just got your shiny new DC Nazgul, I know how that is with the weather, here in Ecuador we'll get fog and rain for weeks. Right now is insanely sunny though, guess it's global warming 😂 Personally I prefer the XT60 to run out the back with about an inch of cable free and that's what I do when I build my own. Lately manufacturers have been doing the captured XT60 which looks super nice, but is not so practical. Like you, I have to use an extension on my JohnnyFPV QAVS2 build for most batteries, and I would prefer not to... weight aside it's two more points of failure. Maybe there are batteries with longer leads?
@Mxoderberg 3 күн бұрын
I agree with the xt60 mounting. The hardmounted one on the updated version sucks! Looks good but battery options is limited. I had a F6d Evoque and with a Gopro there wasn't space for a big lipo for longer flights.. And add all the plastic sideplates and it was just a lot of unecessary stuff that don't really matter, I'd choose this kind of frame over the Evoques every time.
@colibrifpv 3 күн бұрын
I hear you, when I build I like to leave the XT60 running out the back with about an inch or half inch of cable, just enough to allow flexibility for battery mounting. It's really the angel of that mount that gets you, if it were totally vertical it might be better. That Evoque F6d is super nice, I built a 6inch and I love it for the flying I do, mostly mounting cruising with a GoPro for cinematic shots. 7" is technically better for that but the batteries, weight, and $$ get to be too much, 6" is juuuuust right!
@FlargzVR 3 күн бұрын
I have a question, can I buy the pavopico20 with the betafpv LiteRadio 3 pro and the VR03 fpv goggles?
@colibrifpv 2 күн бұрын
Hi there! Well, if you get the ELRS version of the Pavo20, and the ELRS version of the Betafpv LiteRadio 3 pro, then yes, they will work together. As for the goggles, those would work only if you installed an analog VTX in your quad, and this quad really is made for a digital system like the DJI O3 or Walksnail, so I would recommend you purchase some digital goggles and a digital VTX. Best of luck with it!
@FlargzVR 2 күн бұрын
@@colibrifpv thank you! But I have a question, should I get that pack or the Cetus X cuz I have A HS360S which is my only drone and I never had a fpv drone so should I get the Cetus X kit with all the accessories or the pavo pico set
@voelcker 3 күн бұрын
What size shocks are you running with your teraflex shackles? I just swapped out my stock 70mm front and 90mm rear shocks for 90mm & 110mm shocks. I'm waiting for my red leaf springs and my teraflexes to arrive and get them installed before I decide if I need leaf spring lift blocks.
@colibrifpv Күн бұрын
Hey 👋 Sounds like an awesome project! I used the stock shocks that came with the RC4WD kit and they worked pretty well!
@burdfamfpv 3 күн бұрын
Great re-view man nice looking quad
@colibrifpv 3 күн бұрын
Thanks a lot my friend, really appreciate your feedback. Can't go wrong with the Eco, it's like buying the parts and getting the labor for free 👍
@DanWewe 3 күн бұрын
Thanks for the video. I wanted to buy them for me, and still had questions. Video came on time
@colibrifpv 3 күн бұрын
Really glad to hear that, you can't go wrong with this one, price out the components and you're basically getting an flight built and tuned quad for the cost of the parts 👍
@DanWewe 3 күн бұрын
@@colibrifpv thanks :D
@DanWewe 2 күн бұрын
@@colibrifpv Do you still have a drone tip that is similar to the Nazgul in terms of price and performance?
@RCTeamAustria 3 күн бұрын
👍
@colibrifpv 3 күн бұрын
Hey there my friend, nice to see you here, thanks a lot for your support!
@felipepompermayer841 5 күн бұрын
Im building a ultralight 5" long range drone with 2004 1800kv motors, do you think I could use a 4s Liion battery or should keep using 6s? Thanks a lot and congrats for the amazing content
@colibrifpv 3 күн бұрын
Thanks a lot for your feedback! You could use 4s lions for endurance flights but it will be very sluggish with 1800kv motors, especially at the end of the flight when the battery voltage is lower. I would recommend 6s, they will be a little heavy but they should give you some nice long flights times with a more reasonable mount of power. I think my Croc5 was flying for ~17minutes on these 6s 3000mah lion batteries with an 1800kv equivalent (4s motors with motors output limit)...
@brkfpv60 6 күн бұрын
I've been flying my Pavo 20 for 20 days now, and it's really a lot of fun! It's a small drone but packs a punch. With a 550mAh battery, I get about 4.5-5 minutes of flight time. I'm really loving this little guy. Thak you for review
@colibrifpv 3 күн бұрын
That's great to hear, thanks a lot for sharing your experience! I agree that it's a super fun little quad, what I really like about it is that I can fly this drone where I can't fly bigger, louder quads...
@fabriziofarina 10 күн бұрын
Lipos with ET2.0 connectors are hard to find. Can I use lipos with GNB27 connectors? Is it possible to use lipos with GNB27 without having to replace the ET2.0 connector on the drone?
@colibrifpv 10 күн бұрын
Hello! Yes, ET2.0 connectors are made to be compatible with GNB27 connectors. However, I did notice that between brands there is slight variation in tolerances and so they can be difficult to remove, but they will work. I am using different brands of GNB27 lipos with that Eachine charger, which has ET2.0 plugs, and they work fine, just a bit snug but usable.
@colibrifpv 10 күн бұрын
Check out the Pavo20 👉 kzfaq.info/get/bejne/kLl5hqaY3q-Wo2g.html
@adrill 11 күн бұрын
Hello! Do you think this frame is ideal for a beginner building his first drone or is this more for senior fpv?
@colibrifpv 10 күн бұрын
Hey! This frame would be a good beginner build because it comes with clear instructions but that rear assembly and soldering the battery lead is a little complicated. If you are looking to build up your first 5" drone, I HIGHLY recommend the Bardwell beginner kit. It's based on the same frame (QAVS2) and the video build series that accompanies it is invaluable, JB will walk you through the process step by step and you will avoid many of the pitfalls we all fall into during our first build... check it out 👉 bit.ly/JB_Digital
@adrill 10 күн бұрын
@@colibrifpv okey thanks!
@shortscuk 11 күн бұрын
Bir dahaki sefere Türkçe altyazılı yükler misin
@colibrifpv 10 күн бұрын
İzlediğiniz için teşekkürler. İngilizce altyazılar bulunmaktadır. Seçeneklerden Türkçe'yi seçebiliyor musunuz? Otomatik olarak tercüme edilecekler...
@shortscuk 10 күн бұрын
@@colibrifpv Teşekkür ederim ☺️
@vogulz 12 күн бұрын
bought the Pavo pico, every time I fly it the stock propellers shred apart lol hoping new props fix that
@colibrifpv 10 күн бұрын
Sorry to hear that, I've had pretty good luck with the stock propellers and I've flown over water and places I wouldn't want a prop to go flying, but I do think you need to have some extras on hand because with those push-on props, once they've been removed a few times they will come loose, and also, if they are even the slightest bit bent, the quad will shake and your footage won't be smooth. Try fresh props and let me know how it goes!
@user-hi8ji8gm8z 12 күн бұрын
Pavo break shit QC at beta wasted 200😡😠🌏🌍🌎🎮🤑🤑🤑🤑🤑🤑🤑🤑🤑🤑
@bl1ssmedia837 13 күн бұрын
I had a cinelog 35 quad but unfortunately it sank a month ago along with a 4 day old Gopro Hero10 :=( I really liked it because it was strong and quiet. I also tried a v2 cinelog35, which is very powerful, but also very loud. I'm thinking about a Pavo too. How loud is this quad compared to a cinelog? I appreciate your work! Thank you
@colibrifpv 12 күн бұрын
Oh man, that's too bad you lost your quad with a GoPro on it, it pains me to say it but that's happened to me twice, once with a DJI O3 quad that clipped a branch over water, and once with a 7" long range with an older GoPro... ouch 😩 I also have a CL35 and this quad is quieter than a CL I think because of the duct design, but it's still loud. It makes a different noise, more of a whoosh than a scream. I prefer the way the Pavo35 flies with these new Lava motors, it's more efficient and flies longer...
@bl1ssmedia837 12 күн бұрын
@@colibrifpv Ugh, that's really rough! Unfortunately, we have to prepare for this in this hobby :( I didn't have a GPS installed, it doesn't happen anymore. I have a Pavo20 on the way and I really like the Pavo35. Thank you for the information about the quad, it helped me a lot in my decision!
@bl1ssmedia837 13 күн бұрын
Detailed and enjoyable review, thank you!
@colibrifpv 13 күн бұрын
Hey thanks for watching, really glad you liked it 👍
@colibrifpv 13 күн бұрын
Video comparing Pavo20 vs Pavo Pico 👉 kzfaq.info/get/bejne/kLl5hqaY3q-Wo2g.html
@GiantAntCowboy 13 күн бұрын
Nice review, great info, cheers!
@colibrifpv 13 күн бұрын
It's a good one for flying "incognito" when you can't get away with flying a big noisy drone 😉
@DanielJohnFPV 13 күн бұрын
Oh, interesting - yours came with a normal antenna. Mine came with a wire antenna for ELRS. Having a ton of fun with it so far!
@colibrifpv 13 күн бұрын
Hey there Daniel, actually that little red wire for the ELRS antenna is built into the AIO board so I have it too, the blue antenna you are noticing is the BetaFPV 900mhz antenna for the crossfire RX 😉
@jacekkaczmarczyk_drones 13 күн бұрын
Another brilliant review, many thanks @colibrifpv 😍😍
@colibrifpv 13 күн бұрын
Thanks a lot my friend, I realy appreciate your support 🙏🏻 🙌
@colibrifpv 13 күн бұрын
Check out the Pavo 20 👉bit.ly/Pavo20 BetaFPV👉 bit.ly/BetaFPVStore Don't forget you need a VTX 👉 DJI O3 AIr Unit: amzn.to/4fwDUjR DJI Goggles 2/Integra: amzn.to/46ikmv2
@Honeythebeebee 14 күн бұрын
Just bought the 7" version, two parts are missing (left and right rear base mounts), but the overall quality is stunning!
@colibrifpv 14 күн бұрын
I had my eye on the 7", seems like this frame would be a perfect match for larger props with that xt60 moved off of the top plate making space for massive batteries. That's too bad that you had missing parts! You should definitely reach out to GetFPV support, I'm sure they will get you taken care of...
@rc-trassa 14 күн бұрын
Nice
@colibrifpv 14 күн бұрын
Thanks my friend! It's lots of work but lots of fun also!
@Offroad_Airscapes 14 күн бұрын
Flew 4 packs with mine then upgraded to the 03 air unit and gps, im a fan of geprc but this thing has given me grief from day 1 with the camera quality, fc and esc. Its good now but theres not much left of the original set up. Just unlucky this time i guess.
@colibrifpv 14 күн бұрын
That's too bad, thanks for sharing your experience. I also have a very high opinion of GEPRC BNF quads, the ones I've owned have always come with a fantastic tune unlike other brands. Although with this budget Mark4, I think they cut corners in order to mass produce these things at a lower cost. Hopefully it doesn't impact their reputation for quality...
@thewelsho 16 күн бұрын
Are the Goggles 2 are compatible with the Mavic Pro 3?
@colibrifpv 14 күн бұрын
Hey there, thanks for watching! Yes, the Magic Pro 3 can be linked to the DJI Goggles 2 and the Goggles Integra.
@thewelsho 13 күн бұрын
@@colibrifpv Thanks for replying. Sadly the goggles remove access to the screen which means I can't access Intelligent Modes, change zooms etc. during flight. I can't understand DJI for doing this. The Mavic Pro 2 worked amazingly with the original white googles, I doesn't make sense to remove that experience. Ridiculous.
@zorgmorkovkin7911 16 күн бұрын
Excellent drone, flies amazingly, although I changed the camera to a foxeer toothless
@colibrifpv 16 күн бұрын
That's good to know, thanks for sharing your experience. I put a Walksnail system in mine and I love it!
@William_NS 19 күн бұрын
As someone who started FPV 1.5 years ago with a DJI potato and quickly got into building with the O3 air unit, I am oddly fascinated with analog FPV. It started when I built racers with analog VTXs and, of course the video is terrible compared to the digital systems, but it's not that terrible. Like I can still see where I'm going. Don't get me wrong, the VAST majority of my fleet sport O3AUs with a few vistas sprinkled in for low light capabilities, but for some reason, I keep buying analog components and tinkering with them to try to get the best video possible. Maybe it's the latency that I enjoy so much, idk. I can't really explain it, but I just got a Maten and I can't wait to pair it with the ratel pro and the Phoenix 2 and see how it does. And of course compare it to the 1.6w offerings from iflight and TBS. 😀
@colibrifpv 18 күн бұрын
That's great to hear that you can put analog gear to good use, I guess it is the "golden age" of analog because now we are getting super high powered analog systems and good quality cameras at a price that is very accessible. Enjoy that Maten VTX, I found that mine was able to maintain that high output power during long flights with my Mark4 7" using li-ion packs...
@yozfilm6275 25 күн бұрын
Nice!! Is possible to take out the micro sd card with a tweezers?
@colibrifpv 22 күн бұрын
Hey thanks for watching! We'll not really, I had to remover screws, lower the Air Unit, THEN use tweezers. It's totally doable, but it is a thing with this drone...
@BansheeFPV 26 күн бұрын
I don't see enough difference between the Gopro and the O3 to merit the $400 purchase. Thanks for the video
@colibrifpv 25 күн бұрын
@@BansheeFPV In ideal lighting conditions, the difference is minimal. When lighting isn't great you do see more of a difference, but it's still not night and day...
@LayinLo 27 күн бұрын
will this pavo fly with the dji googles 2 as well??
@colibrifpv 27 күн бұрын
Yes it will, assuming you use the DJI O3 Air Unit, which is compatible with the Goggles 2
@lukasEgg 27 күн бұрын
I had a lot of jitter. Thightening the Screws of the camera helped. I had also an issue with the DIY naked gopro mount, there was some play because the screws were too big. Also added some washers there and now it is flying so nice!
@colibrifpv 27 күн бұрын
That's great to know, thanks for sharing your experience! I had the same issue with this mount, and the lumenier Johnny FPV frame, which uses the same system. The mounts are too soft, but adding some m2 washers tightened things up 👍
@Happyants_ 27 күн бұрын
Thank you
@colibrifpv 14 күн бұрын
You're welcome, thanks for watching!
@outegaming 27 күн бұрын
I am looking to buy a DJI fpv, as someone who has never flown a FPV and has no preference, which one do you recommend
@colibrifpv 27 күн бұрын
Hey there, that's awesome that your thinking of getting into FPV! I recommend first buying a decent radio, like the Radiomaster Boxer, then practice with it on the simulator. After you feel comfortable, get a tiny whoop and have fun! After you feel comfortable with that, get yourself something bigger and more capable. Trust me, take your time and you'll have fun and avoid costly mistakes 👍😁
@MaxEdelstein 29 күн бұрын
Could I just change the frame of my cinelog 20 for this one ? Thanks
@colibrifpv 27 күн бұрын
I can't see why not, but you may need to extend those motors wires, this frame is much wider, even though it is a 2". Also, if you already have a CL20, was it a BNF from GEPRC? If so, maybe just keep it and build one of these from scratch with larger motors? I only suggest it because GEPRC's tune is usually so good it would be a shame to waste it...
@RCCRAZYSTUPID 29 күн бұрын
My pavo 35 has a flutter sound on throttle up with running a gopro 12 on it
@colibrifpv 27 күн бұрын
That doesn't sounds right, maybe you have a bad motor or ESC? Have you tried playing with the tune?