I think it is not save if you do break and the accelerator on same position and car will make noise and take more fuel consumption the mental peace will be gone need to 2 accelerates points
@kj34282 күн бұрын
Really enjoyed the video.
@helderyoung8484 күн бұрын
How many bricks did you spend on that job...and how much does it the cost for it
@renwicksanderson95735 күн бұрын
You have one step instead you have 2 step + 10 in
@JustinBiddix4 күн бұрын
I don’t understand what you mean
@renwicksanderson95735 күн бұрын
Two step instead you got one step+ 10in
@MarshallSmith277 күн бұрын
I’m in the market for a used mower/bagger in the $800 range. my john deere still runs but is used so much it’s not worth the repairs anymore. any recommendations?
@denimjez10 күн бұрын
This mailbox is set to far back from the curb
@JustinBiddix10 күн бұрын
Thanks
@victorboyd988111 күн бұрын
How much something like that cost
@JustinBiddix10 күн бұрын
About 1500
@husseinfakhreddine250111 күн бұрын
What are the measurements?
@JustinBiddix10 күн бұрын
What measurements? There’s a lot of
@steenfraosterbro326814 күн бұрын
Looks really great. My only concern is the last step (top one) looks to be around an inch taller than the first two. Is this not a tripping hazard?
@Espino11317 күн бұрын
Really good bossman keep up the great work thank you for taking your time to share this video with us ! Question did you reinforce it with rebar ?
@JustinBiddix16 күн бұрын
Thank you! Rebar in the footer. No rebar in the mailbox.
@nickeckemoff763118 күн бұрын
You still happy with the trailer? Considering getting similar from kaufman.
@JustinBiddix18 күн бұрын
It’s alright. Gets the job done. I feel like some things about Kaufman are cheap. But they are a budget trailer. I had an original tire completely explode 2 weeks ago for no reason. Plenty of tread left and only 5 years old. Also I wish I would have got a power up dump only. Not a power up and power down. Check into that. Because you have to cycle the battery all the way down on this one. I’ve seen ones where gravity alone lowers the bed. Also look into a telescopic dump because I hear they are stronger than the scissor type dump that is on this one. If you load a lot of weight forward this one will not dump. But I’ve learned over the last 5 years how to properly use it to suit my needs. Mostly it hauls mulch (7-10 cubic yards fits well) and haul a lot of tree limbs and shrubbery clipping from property clean ups, and decorative rock, some dirt, etc. It definitely gets the job done, but if you want a super nice trailer and money isn’t an issue id look at maybe a diamond c or load trail and compare. I’ve heard good things about those brands.
@redoakpropertycarellc20 күн бұрын
🍻
@AmusedKelpie-tc9du21 күн бұрын
I have 2018 60in. super z and 2012 54in. Super duty, guess which one gets the work out ? Both have kaw. engines, but the 54in. super duty is more convenient with the readable on top cutting height guage and see through fuel tank. I saw your post which I was searching for video on how to change my fuel guage in my 2018 super z, hopefully there something out there to help...😮
@AnthonyReynolds-ii7ce28 күн бұрын
Why do your cinderblocks have legs on them?
@JustinBiddix27 күн бұрын
I’m not sure what you mean by legs? You talking about each end not being flat? These are just regular block. The flat ends are specifically for corners of a building so you can have a flat side of the block exposed.
@freedomisntfree_44Ай бұрын
Didn’t even mention what’s wrong with the sthil 🙄 I like the strike 4 mix for thick ditches and a 2 stroke is better for fences
@zacharyrhein2992Ай бұрын
Shin-daw-wa
@z_blevАй бұрын
Fast workers 🤙🏼
@redoakpropertycarellcАй бұрын
Great work 💯🍻 This one should put you over 2k for sure 💪
@JustinBiddixАй бұрын
Thanks! I need to get some lessons from you. You are a natural on the KZfaq.
@redoakpropertycarellcАй бұрын
Get it nice and wet 🌧
@JustinBiddixАй бұрын
We soaked her down for sure! Got a perfect rain storm after it went down too
@redoakpropertycarellcАй бұрын
@@JustinBiddix nothing better 🍻
@ALWAYStheEIGHTIESАй бұрын
What is the actual part name of that rear bracket pivot arm thing at 5:15 , 7:00 , 17:00 ? My right rear one is broke in half and I keep trying to look up replacement parts but not having any luck without the proper part name. I don't know if maybe I can get someone to weld it or something if I can't find one.
@JustinBiddixАй бұрын
I really don’t know what that’s called. You should be able to weld it
@user-ot7lt9ms3yАй бұрын
Wow Thanks. Why did you use a resistor instead of a jumper wire? The 3 wires on my kickstand sensor are Green, Black (center wire) and Pink. Not sure which is positive or negative. So should I put a resistor on my Pink and Green wire, leaving the black untouched? Thank you for your service.
@user-pc3cf6xw2hАй бұрын
What weight engine oil did you use?
@JustinBiddixАй бұрын
t4 15w 40 i think
@winstonpatton9682Ай бұрын
You made a wise decision
@JustinBiddixАй бұрын
its been a good one. 2800 hours on it now
@vintageexcellenceАй бұрын
Umm I know nothing about mowing, I have a couple acres and tired of relying on outside help to mow it so I looked on OfferUp the other day and found a 8yr old Hustler 60” and bought it for $3000. It has a broken idler pulley need to fix that then go. Man is this thing a hotrod mower, I buzzed through the field drunk last night no blades going and it was hilariously fun. Did I do good at $3k 😊??
@JustinBiddixАй бұрын
Yeah that should be a good one. Does it have a Kawasaki engine?
@JustinBiddixАй бұрын
And how many hours are on it ?
@coolftpАй бұрын
Nice. How long is this trailer - how many deck feet and how much dovetail?
@JustinBiddixАй бұрын
20 feet of flat bed and 4 dovetail
@HunterHunter93Ай бұрын
How do you lock barn doors?
@JustinBiddixАй бұрын
I’ve personally not seen a lock on one. Probably like a screen door latch would work
@HunterHunter93Ай бұрын
@@JustinBiddix ok thank you, yeah I was wondering as I would like a barn door for bathroom
@HunterHunter93Ай бұрын
How do you lock it ? Or it can't be blocked?
@kaialoha9487Ай бұрын
Shin die wa..not shin dwa… pronounce the vowels correctly. Irraz
@JustinBiddixАй бұрын
different people have different dialect
@pauls3758Ай бұрын
Wise man once said keep it simple stupid technology isn't good on a lawnmower
@talentmymusicmkhize9195Ай бұрын
How to lock it?
@tmilen1Ай бұрын
It’s too far away from the road. The mail person will complain for sure.
@RIckFreedomVIPАй бұрын
does this work for ktm 390 adventure?
@bostoncardnut7925Ай бұрын
Dewalt is junk. They haven’t kept up with competition for years. They just change the plastic style and say their products are new. Junk
@jnmc-vx4fwАй бұрын
Completely wrong
@driverjamescopelandАй бұрын
I haven't tried any newer Shindaiwa units. All of mine are pre-buyout (oldest is 2006), and still going strong. I gave up Stihl long ago. Their engines are way too finicky, and don't tolerate modern gas AT ALL, regardless of what mix you use. When the last Stihl gave up the ghost, I bought a used Shindaiwa at a municipal auction for $20. It has consistently outperformed and outlasted any of my previous units, and had untold hours of municipal use before I even purchased it. I've since bought two more, and they will likely be my last gas units... as I've went all electric, and will probably never go back. I don't care of they're underpowered, or a battery doesn't last as long as a full tank. My wall outlet is my new gas tank, amd my hearing protection. My maintenance and operating costs have never been lower.
@TheBBQKEEPERАй бұрын
I have a 2010 Hustler Super Z with a 72 inch deck, and trying to find how to place in neutral to tow. Do you have information on how to disengage the hydraulic? I am having issues find information that I need. Appreciate the help!
@JustinBiddixАй бұрын
Yeah, if it’s like mine. Lift the seat to access the hydro pumps. There is one pump on each side. There’s a bolt on the side of each pump. Probably about a 17mm bolt. Kinda hard to get a wrench on but it is possible. Twist those bolts counter clockwise till they stop and it will be in neutral
@TheBBQKEEPERАй бұрын
@@JustinBiddix Thank you!
@lizpotter8123Ай бұрын
How hard is this for a single person to do? I have 30year metal louver doors that I hate.
@JustinBiddixАй бұрын
It’s easy if you have decent tools and some basic carpentry skills.
@michaelbacile8439Ай бұрын
I’m going to need this eventually on my property. Everyone keeps telling me I have to totally kill the grass/weeds I have before regrading and sodding. I really just want to fix the grade and sod over it. Thoughts or advice?
@JustinBiddixАй бұрын
Killing the grass would yield higher quality results. But if you get a thick enough layer of dirt on top say probably at least 3 inches you should be fine without killing the grass
@Fender664stringАй бұрын
More money, more Newer made which is 💩!!!Older is a hell of a lot better MADE . Got the 2011 model what a TANK !!!🇺🇸👍🏻🇺🇸👍🏻🇺🇸👍🏻🇺🇸
@rickjones12812 ай бұрын
Looks good but is it too far back for the mail man?
@urielholly41172 ай бұрын
Stihl is just the brand name now i switched to echo stihl has let me down drastically
@driverjamescopelandАй бұрын
Stihl has let everybody down. It's not just trimmers... it's all of their smaller equipment. I can't speak on their larger equipment... but anything with an engine 36cc or less is more maintenance-hungry than my kids.
@BrotherJames11112 ай бұрын
Thanks
@517leeman2 ай бұрын
Dream mower , currently have a exmark 2002 72”
@GARRY37542 ай бұрын
Adding block in middle is textbook. Lord knows I have seen the opposite on pillars holding up seconds story porches.
@tombarnett49162 ай бұрын
26 inch ripsaws and a front torque locker= a goat awesome
@tombarnett49162 ай бұрын
26 inch ripsaws and a front torque locker= a goat awesome
@rossp31062 ай бұрын
Nothing else to do but check your trailer tires at night. Lol