Gary Lamont

Пікірлер

@hershelroach2815 10 күн бұрын

I have question what kind glue you spray for headliner

@garylamont898 8 күн бұрын

@@hershelroach2815 well wood landau top adhesive

@hanyguirguis-zi7pj 17 күн бұрын

I have just glued the foam (closed cell) on my 1988 Brougham and it's great but the glue stick quick and does not allow for readjustment. What is the right way to apply the Weldwood contact cement and be able to manage the vinyl top in place before pressing it down? This video doesn't explain that point.

@garylamont898 16 күн бұрын

Mark a centerline on the top and Mark centerline on the vehicle glue the top first place the top on the center line. I flip over the top halfway put just a small amount of glue just in the center area. Set your centerline then glue each side separate from there.

@oh8wingman 3 күн бұрын

An old trick that works when using contact cement to give you time to play around a bit is to place waxed paper sheets between the two surfaces. Contact cement will not stick to waxed paper so you can pull it out in strips one at a time and get you foam straight before pressing it down. Work slowly and in increments that you can handle and you should do alright.

@queezytarantino1456 26 күн бұрын

Great work, what do you normally charge to redo a vinyl top?

@garylamont898 16 күн бұрын

@@queezytarantino1456 $800 on up depending the vehicle

@PhongTrao-o1q 28 күн бұрын

GREAT WORK REALLY ,REALLY LOOKS GOOD ,THANKS FOR THE VIDEO

@Freejohnsilkyputty Ай бұрын

Are you using regular contact cement?

@neilanderson647 Ай бұрын

I need my top done on my 1983 oldsmobile 98 4 door where are u located

@Douglassappington 2 ай бұрын

Great instructions, we struggled in the past but followed the video and went right in.

@MonicaMerrill-io3rh 2 ай бұрын

What is the glue you used to do this? The one we used on our 1971 Charger didn't work that slick? Thanks for the help

@garylamont898 2 ай бұрын

Weldwood what’s that landau top adhesive

@jaimecovarrubias4029 2 ай бұрын

Looks good!!

@dirtydonnyz 3 ай бұрын

Very Kool brother

@garylamont898 3 ай бұрын

I am open Monday threw Friday 9 to 5 Lamont’s auto upholstery in Michigan

@russelltillery1904 4 ай бұрын

I have a question about removing the aluminum strips across the top and up the B panel. Can you provide assistance with that? Nothing on KZfaq shows the removal of those strips can you talk me through it? I love that blue top on the white with the seams.

@garylamont898 4 ай бұрын

What type of car?

@russelltillery1904 4 ай бұрын

@@garylamont898 sorry same car as demonstration 1979 Olds Cutlass supreme

@russelltillery1904 4 ай бұрын

@@garylamont898 also Gary do you know if the plastic strips around the back window are available the ones you took the fabric under along the back window. You got skills thanks for the demonstration.

@garylamont898 3 ай бұрын

They are on with clips I unclip the side first I push the molding to the side then use a plastic stick to unclip them once the sides are loose I normally pull them straight towards me and slide them off be careful those clips break really easy

@garylamont898 3 ай бұрын

If you can’t find them in a junk yard you have to make them I use fiberglass shower board and silicone around the outer edge stick it right to the window I have made many custom tops that lasted for years that way you just have to pad it up a little more and shape it

@russelltillery1904 4 ай бұрын

Your top replacement on the cutlets was real helpful. I have a question about removing the strips along the top and up the B panel. How can I get further assistance?

@QuintonSmith-bx8yf 4 ай бұрын

Fast mover a quick learner

@johnhubert5143 4 ай бұрын

wow , have you ever done one of these before?...I'm just sitting here watching a lot of mistakes. Well I hope your learning more from each one you do.

@garylamont898 4 ай бұрын

Yes I am learning allot this is my second one i ever did in my 40 years of doing upholstery 😂

@StarknightMT_official 4 ай бұрын

Hello, Are you interested in testing our products? We would like to invite you to test the Seat Covers for your 2023 Can Am Defender Max

@garylamont898 4 ай бұрын

Do you have contact information I would be interested

@kyledoubleu8833 4 ай бұрын

How much do you charge to do a black top on an 80 cutlass and I remove everything? And clean under the old vinyl top first

@wakeupandbord 5 ай бұрын

Thanks, started freaking out since my thoughts were there is no reason it should be leaking assuming competent QC at factory. Therefore, was worried maybe its burning off coolant. Scary for a brand new 2023. Going to rip it apart today and see if this is the cause.

@garylamont898 5 ай бұрын

Mine was leaking behind the passenger side wheel where it plugs into the heater core also so make sure them are good and tight glad my video pointed you in the right direction

@tonyrose823 5 ай бұрын

Thanks for the show.

@DumbCarGuy 5 ай бұрын

Good video. Next time you make a video please hold the cell phone camera sideways.

@klwthe3rd 6 ай бұрын

My neighbor next door to me is from Bay City, MI and he has to be one of the nicest guys i've ever met in my life. I've always loved vehicles with vinyl tops and to watch this man work with over 40 + years of experience is so gratifying. He has a true talent and takes a ton of pride in his work. Awesome video.

@oscarsoto2642 6 ай бұрын

Where you located

@johncombs4399 6 ай бұрын

What size tip do you spray with on your paint gun?

@vicswanby454 7 ай бұрын

You made this look really easy. I'm looking forward to seeing that in my 66 Chevelle I hope it goes as easy as this one did. Fingers crossed...

@rsjm1579 5 ай бұрын

I have a 66 chevelle my self

@KCR_Kustoms 7 ай бұрын

What type of foam is that

@fabianpantoja1696 7 ай бұрын

Nice work! Where are u located at? If not too far I may have another project for you soon

@Blizzon17877 4 ай бұрын

Should you get a car painted first before doing this because im gonna get my painted @@garylamont898

@jaym6325 8 ай бұрын

the part none of the videos show is when they make the cuts for the side dome lights like on a 67 impala. I'm assuming the cut has to be big enough for the light to come through? do you have a video showing how to do that part?

@jaym6325 8 ай бұрын

locktight at lowes does not work.

@jaym6325 8 ай бұрын

what is the name of the adhesive you used on the car and headliner?

@nealm8709 8 ай бұрын

Great job! How much do you charge for labor?

@adam_helmsmasher8543 8 ай бұрын

Very useful video, thanks for making this

@user-vr5pf7fl1f 8 ай бұрын

Same exact issue with 2023 Limited. Nice video.

@hermananderson36 8 ай бұрын

That is awesome

@peteraudley5628 9 ай бұрын

A master crafter

@chrismedina356 9 ай бұрын

By the way, it looks really good

@chrismedina356 9 ай бұрын

Where do you buy the material from?

@kevinlane3029 9 ай бұрын

Awesome..thank you

@thabigghomie_ 10 ай бұрын

Nice👌🏽👌🏽👌🏽👌🏽

@chrisrickard141 10 ай бұрын

thanks for the video ive taken over my family shop and havent done a vinyl top yet because my father did them and i watched but never got to do one so this video was very heplful and to the point for me thank you

@DeadEyeCIA 10 ай бұрын

I just bought an 85 delta 88 Royal Brougham that I’m restoring and this video is gonna save me some money lol.

@erik30950 5 ай бұрын

I got a 82 ⁸⁸Royale as well my top is bad I'm debating if I should do it or a shop do it I'm scare to break the parts

@leomireles863 11 ай бұрын

Where do you purchase your materials at?

@garylamont898 4 ай бұрын

Miami corp

@jaysplace1299 11 ай бұрын

Thank you for this video! I love watching a craftsman that is great at their work! 👍What thickness of pad do you recommend for oem look?

@joeybaez1745 11 ай бұрын

Nice work 👏 👌

@jeffreyfelder7981 11 ай бұрын

You do very nice work... thank you for this....

@papergatorzfedducca7998 11 ай бұрын

10 gauge copper?

@garylamont898 11 ай бұрын

Yes

@papergatorzfedducca7998 11 ай бұрын

New subscriber 🔥🔥🔥

@Mikefngarage 11 ай бұрын

I think those are pretty easy but just every headliner is hard on the body. Reaching up is always hard. a steamer does wonders with the smaller wrinkles. if you have any.

@danboy.213 11 ай бұрын

How do it cost to replace a vinyl top?

@garylamont898 11 ай бұрын

Depends on the car and the difficulty of the job

@aaronaffan5132 Жыл бұрын

Thanks for the knowledge bomb

Ең жақсы KZfaq

Пікірлер