Thx for green screen the video who green screend my video
@MurangaZW53 минут бұрын
@@Proefboys the video is fun i thought i should do a collabo thanks to you
@FreAk_dr.2 сағат бұрын
Just keep going bro and you will succeed 🤗🤗🤗
@MurangaZW47 минут бұрын
@@FreAk_dr. thanks my brother i am trying every day
@FreAk_dr.20 минут бұрын
@@MurangaZW 🤗🤗🤗 take practice also in advance thinking in circuitry and also take a I time to look for what is the purpose of that parts you removed
@intelcorei0364Күн бұрын
Using hot air how to know if the component is already soldered?
@MurangaZW10 сағат бұрын
@@intelcorei0364 well for me i check the solder it change colour
@FreAk_dr.2 күн бұрын
i have one... 😁😁😁
@MurangaZW2 күн бұрын
@@FreAk_dr. bro stop that i need one badly 😂😂😂
@MurangaZW2 күн бұрын
May i see
@FreAk_dr.2 күн бұрын
@@MurangaZW later I will upload some video of it
@FreAk_dr.2 күн бұрын
@@MurangaZW I just use it sometimes
@MurangaZW2 күн бұрын
@@FreAk_dr. ok i will definitely get a notification
@FadelMsa5 күн бұрын
😂
@MurangaZW5 күн бұрын
@@FadelMsa i can sing well well 😂😂😂
@user-uq6tv6bt7x5 күн бұрын
😂😂😂😂❤
@MurangaZW5 күн бұрын
@@user-uq6tv6bt7x exactly why i had to do this video didn't wanna lough alone😂😂😂😂
@paulappelle63386 күн бұрын
Can’t beat it and it’s free,thanks god ❤❤❤❤
@MurangaZW6 күн бұрын
@@paulappelle6338 thank you always happy to see the sunset here its like magic...very beautiful
@TheresaWalsh-nj1gu6 күн бұрын
Whattt!!!!!!!
@MurangaZW6 күн бұрын
I tried to sing but its not for me
@FreAk_dr.10 күн бұрын
looks good
@MurangaZW9 күн бұрын
Thanks my brother
@ArminAkhlagh13 күн бұрын
Great job.👏👏 Some free tips from my experience:❤❤ 1. When board is not crowd It's better to lower the temperature and rise the air speed and bigger nozzle 2. Use syringe and gage 16 or 18 needle for flux. It can help for less waste and easier cleaning 3.dont put pressure on aligning ic legs.first make its align and then solder those 2 first legs.with this pressure it can crack internally in the silicone 4. First use cotton swap and 99% isopropyl alcohol for cleaning, then toothbrush and isopropyl then put a paper towel and just press toothbrush multi times to soke that mixture of isopropyl and flux from board and also from toothbrush to make it clean.🙏❤️
@MurangaZW13 күн бұрын
@@ArminAkhlagh noted thank you immensely i will do try that technique i will alfo buy the cotton your teachings means alot you are highly appreciated sir
@Turco94913 күн бұрын
I have some soldering skills but I need to start practicing on PCB boards and SMDs since I want to get more proficient at it but have yet to sit down and start, something always came up! You definitely motivated me to get the ball rolling! Wish you the best with your journey, sir!
@MurangaZW13 күн бұрын
@@Turco949 thats you motivating me also all the best to you too i also work so i try by all means to practice whenever i come home early or before my shift especially when i work nights
@MurangaZW13 күн бұрын
@@Turco949 thank you immensely
@MgxotwaMandilive13 күн бұрын
Ncoo🎉
@MurangaZW13 күн бұрын
@@MgxotwaMandilive thanks
@FreAk_dr.15 күн бұрын
nice kid you have there
@MurangaZW15 күн бұрын
@@FreAk_dr. thank you sir
@FreAk_dr.15 күн бұрын
that problem is a basic check flex cable main board to lcd
@Chikafu.M15 күн бұрын
Thanks though that was so Lcd issue i changed the lcd and it worked so i wanted to fix the one that us flickering
@MurangaZW15 күн бұрын
@@Chikafu.M @freAk_dr.
@FreAk_dr.15 күн бұрын
@@Chikafu.M it is not LCD issue its a flex cable from LCD to mainboard connection
@MurangaZW15 күн бұрын
@@FreAk_dr. oh ok i see otherwise the owner took it back i was gonna buy it though it had too man probably battery,keyboard and the screen
@FreAk_dr.15 күн бұрын
@@MurangaZW aw that's to many problems
@FreAk_dr.15 күн бұрын
wow
@MurangaZW15 күн бұрын
@@FreAk_dr. i am enjoying the easy ones
@FreAk_dr.15 күн бұрын
@@MurangaZW just start doing basics and that's good
@MurangaZW15 күн бұрын
@@FreAk_dr. thanks brother i love this and i wish i know more i even buy a thermal camera that i could afird from shein i thought it will be easy as i was struggling to finish the issue on a laptop i bought
@FreAk_dr.15 күн бұрын
@@MurangaZW issue..? what issue was it..?
@MurangaZW15 күн бұрын
@@FreAk_dr. not coming on tho the is a light when you insert the charger but on a first mosfet the is no power at the gate if i test if on diode mode it is shorted gat and source u removed the mosfet but still the same
@tashadzapasi16 күн бұрын
Weldone😅
@Qdacool_animations23 күн бұрын
In my opinion, it will be nice remind them to subscribe after they've seen the whole video and decided themselves if they like your content😊 great video by the way!
@MurangaZW10 сағат бұрын
@@Qdacool_animations thanks though i qm new to this so definitely got a lot to learn not only thag i have a lot of things to buy so make quality video and repair
@muhammedsemihtopcuoglu843823 күн бұрын
👍
@MurangaZW23 күн бұрын
@muhammedsemihtopcuoglu8438 thank you immensely
@ziadfawzi24 күн бұрын
The PCB is not fixed, and sometimes it moves during the soldering process. Fixing it will help. Also, I recommend watching more videos and practice on dead boards and your experience will get better.
@MurangaZW24 күн бұрын
@@ziadfawzi thank you immensely i will do so i have lots of spare pcb and i am practicing every day
@Qdacool_animations25 күн бұрын
Good 👍
@MurangaZW25 күн бұрын
@@Qdacool_animations thank you immensely
@namhlajada74026 күн бұрын
Sure mawili
@MurangaZW26 күн бұрын
@@namhlajada740 thanks
@FreAk_dr.27 күн бұрын
Seems like you are eager to learn the hard way
@MurangaZW27 күн бұрын
@@FreAk_dr. not really there no school around here i would have gone for practical
@FreAk_dr.27 күн бұрын
@@MurangaZW ow I see.. to bad I hope I could share some of my lectures
@MurangaZW27 күн бұрын
@@FreAk_dr. please do will be highly appreciated i am struggling with testing diode i am beginning to think my multimeter is dead
@FreAk_dr.27 күн бұрын
air and temperature is very important
@MurangaZW27 күн бұрын
@@FreAk_dr. thats true if its too much you damaged the board permanently
@FreAk_dr.27 күн бұрын
@@MurangaZW some ic's are sensitive some are not
@MurangaZW27 күн бұрын
@@FreAk_dr. yeah that is why you need the knowledge by asking or play with the dead board
@FreAk_dr.27 күн бұрын
@@MurangaZW if you are my student I will require you to bring working unit, like tv, radio, laptop, cellphone, etc.. let's see how you could be good on doing circuits
@MurangaZW27 күн бұрын
@@FreAk_dr. if this gonna be an online lecture
@tashadzapasi27 күн бұрын
Keep up
@MurangaZW27 күн бұрын
@@tashadzapasi thank you
@FreAk_dr.28 күн бұрын
like i said do not put to much flux in it...🤣🤣🤣
@MurangaZW27 күн бұрын
@@FreAk_dr. thank you brother we did it
@Qdacool_animations28 күн бұрын
!??
@MurangaZW28 күн бұрын
@@Qdacool_animations i got no idear i am seeking answers too
@andrewortman440228 күн бұрын
Haha, we've all been there! You got the job done. For this kind of size, using hotair to remove is a good choice. Another technique is the good old razor blade - cut the leads near the top of the ic, remove the plastic bit, and then use chisel tip with some flux to pick up the pins that are soldered on. This brings risk of breaking up pads though, if you are crazy with it. I think when soldering back on though, I would wick the existing tin off the pads, and then pin the four corners manually with a soldering iron, some flux, and a bit of solder on the tip of the iron. Then, after you pin the chip in place you can manually solder every pin using the drag technique or just doing it one pin at a time with a needle tip. Usually flux is a good thing, I think though you went a bit overboard with it. It just made you have to clean alot more. Experiment with your usage of flux, you may be surprised how little you need to get the job done.
@MurangaZW28 күн бұрын
@@andrewortman4402 amazing brother i take not i will try to do one by one hopefully you will see the video when i make one exactly how you explained i do not have better flux but i hopebi will buy soo as i am still learning Thank you immensely for sharing the knowledge
@abdoun821429 күн бұрын
God... I take it back, leave those poor Boards alone!
@MurangaZW29 күн бұрын
😂😂😂😂 i Got plenty of them i aint done burning them 😂
@abdoun821429 күн бұрын
@@MurangaZW x) subbed for you
@MurangaZW29 күн бұрын
@@abdoun8214 xxx come let i teach you to be the greatest technician to ever live😂😂
@MurangaZW29 күн бұрын
@@abdoun8214 also thanks for subscription you are highly appreciated
@abdoun821429 күн бұрын
@@MurangaZW im an electrical engineer lol but yeah sure could learn somthing or two x)
@Chikafu.M29 күн бұрын
Take time and practice you will get it
@MurangaZW29 күн бұрын
@@Chikafu.M thanks 🙏
@Chikafu.M29 күн бұрын
That look so easy weldone
@MurangaZW29 күн бұрын
@@Chikafu.M thanks though
@ArturSobkow29 күн бұрын
Get hot air to 340* and scalpel, heat up places where solder is "glue dot" - individually no need to try to preheat whole chip around whole time, put scalpel between pins where "glue dot" are from top to bottom and back out, you will get rid of the Solder glues from between the pins.
@MurangaZW29 күн бұрын
@@ArturSobkow noted thanks you and you are highly appreciated for sharing your knowledge i am greatful!🙏
@Arkkukie29 күн бұрын
You remind me of good old days
@MurangaZW29 күн бұрын
@@Arkkukie thanks are you now a professional?
@MoizRedYT29 күн бұрын
My god ...
@MurangaZW29 күн бұрын
@@MoizRedYT it's funny 😁 isn't it 🤣
@reedski29 күн бұрын
quit soldring bro.
@MurangaZW29 күн бұрын
@reedski it's too late bro ain't no way I will be quitting I have a lot of dead boards and I have a hot air station what should I do with it