![[TAMIYA] 1/12 Scale Model Porsche934 Vaillant + LED headlights](/img/o.gif)
3 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
6 ай бұрын
7 ай бұрын
8 ай бұрын
8 ай бұрын
8 ай бұрын
10 ай бұрын
11 ай бұрын
Пікірлер
@petioleyu 7 күн бұрын
Dear sir, I am recently starting to make this model kit, and your video is the top-notch reference video. I gave some questions: 1. At 20:46, regarding the reddish-orange wire that you use to encircle the engine,do you have the specs, and manufacturer part number that I can refer to? What’s the diameter of this wire? 2. At 27:07, regarding the blue wire/cable, do you have the specs, and manufacturer part number that I can refer to? What’s the diameter of this wire? (the same blue wire as in 27:53) 3. At 33:29, regarding the hose clamp around the duct of the air box, is it an etching part? I bought the etching set from hobby design, but i don’t think it’s in this etching set. 🤔️ could you share how you get this part? Thank you!🙏
@dollpy-bikemodeller 7 күн бұрын
hello friend! If you watched the production video carefully without skipping it, you would know everything about the manufacturer of the wire ^^ I'll give you the answer. 1. The orange high-voltage cable is a product of Scale Motorsports. The product number is sm6010 www.detailshop.co.kr/goods/goods_view.php?goodsNo=1000004130 2. The blue cable is a Museum Collection product, 0.8mm, and the part number is MSMA078. www.detailshop.co.kr/goods/goods_view.php?goodsNo=1000059252 3. The hose clamp is a Japanese brand product called barchetta, and the part number is BP232. store.shopping.yahoo.co.jp/barchetta/bp232.html I hope you finish your LaFerrari beautifully and that you stop by my channel often!
@petioleyu 7 күн бұрын
@@dollpy-bikemodeller dear sir, thank you for your reply! There are quite a lot of additional parts that I still need to get. Your video helped a lot! Super duper detailed! The decal is now very difficult to find. I finally found a seller in Hong Kong who was selling this decal. I bought another yellow version, and plan to build one red and one yellow with LED lights.
@petioleyu 7 күн бұрын
@@dollpy-bikemodeller dear sir, btw, I did see your video mentioned the part number of that orange high voltage cable is sm6010. What I am referring to is the two cable circling the engine, one is white, and the other one is kind of reddish-orange, not the orange high-voltage cable;) . Do you happen to have that part number? Thank you! 🙏
@dollpy-bikemodeller 6 күн бұрын
@@petioleyu ah. White and red wire. Both are products of MSM Creation, and the part numbers are MSMA002 and MSMA005. The thickness of both is 0.48mm. www.detailshop.co.kr/goods/goods_view.php?goodsNo=1000001726 www.detailshop.co.kr/goods/goods_view.php?goodsNo=1000001729
@dollpy-bikemodeller 6 күн бұрын
@@petioleyu I hope you finish it better than me~
@Ale-ux1xt 10 күн бұрын
great job, I'm making the same model, how did you deal with the windshield area? I would like to apply the two-component transparent on the decals, but the 43 is on the transparent part, did you use the tape? I'm afraid that my two-component product will break when removing the tape, I was thinking of cutting between the tape and the clearcoat before it dry
@dollpy-bikemodeller 10 күн бұрын
The windshield was finished by spraying urethane clear without any additional masking. For transparent parts, simply spray glossy clear or urethane clear moistly (but it requires practice).
@refanjuni9426 11 күн бұрын
😮😮😮😮
@user-fh1ef5he9i 13 күн бұрын
作者·我请教一下，又更多细节制作的视屏不？链条制作的连接在哪呢？
@dollpy-bikemodeller 10 күн бұрын
The production video consists of two parts. kzfaq.info/get/bejne/pq1jfdySkt-neo0.htmlsi=miNpZ18PItlnm7a9 kzfaq.info/get/bejne/htx9ntZ3msnHdok.htmlsi=uibzpJQZSo8cRK3X There is a separate detailed video on how to make a Hobby Design chain. kzfaq.info/get/bejne/a8iepa-htsetpKs.htmlsi=H5IOjTy_GGUMF2nD
@danny5804 21 күн бұрын
Thank you! It’s amazing
@javierures3470 23 күн бұрын
La moto una absoluta maravilla. Preciosase merece un millon de likes. El casco el de Ron, unico e inconfundible.
@dollpy-bikemodeller 23 күн бұрын
Thank you very much for your kind words, even though I am still lacking in many areas.😄
@Roosterfox 28 күн бұрын
Well done on the decals on the wheels and frame that looked hard work was it as hard as it looked ?
@dollpy-bikemodeller 23 күн бұрын
Carbon decals are well cut, so they are not as difficult as they look. However, it takes a lot of time because it is a lot of work.😅
@kevinmgd84 28 күн бұрын
Doing the wiring setup, I’m not seeing any length callouts, do we just match it up to diagram ??
@dollpy-bikemodeller 28 күн бұрын
Cut the length of the wire a little longer and then cut off the unnecessary parts to fit the final piece. It is recommended that you follow the wiring diagram in the Top Studio manual, but make the wiring a little longer.
@BarricaG 28 күн бұрын
That's a beautiful model! Working with resin and carbon decals is difficult. You did well.
@dollpy-bikemodeller 28 күн бұрын
Thank you so much for your kind words. i will continue to create great bike models in the future.
@Roosterfox 29 күн бұрын
Love this I am thinking of purchasing this kit and was wondering how difficult is it to make the belly pan? Also why do you add weight to the inside of the engine?
@dollpy-bikemodeller 28 күн бұрын
This kit is not that difficult to build. I think it will probably be easy to make. The purpose of adding weights to the engine is to give it a heavy feel. If it's too light, it looks like a toy. 😄
@fariq7213 29 күн бұрын
hi bro, if I want to buy the finished one, is that possible? I want to buy a motorbike complete with modifications, and can I request the modifications I want, and how much it cost?
@dollpy-bikemodeller 28 күн бұрын
hello friend!. Most of my work is commissioned, so I currently don't have any finished work available for sale. Everything was sold. But you can request it if you want. Both car and bike models are available. Please select the model you want and send me an email and I will let you know the detailed price. However, since many detail-up parts are used, the price is not cheap. Keep that in mind! Please send a request email to the email address below. [email protected]
@vincentlussier8264 Ай бұрын
Beautiful build but the exhaust pipes on the real car were white!
@dollpy-bikemodeller 28 күн бұрын
You didn't watch my video closely. I said that the actual car exhaust is matte white, but I painted it aluminum color at my own discretion. Also, the damper spring is originally black and the seat belt is not originally red. 😂
@user-ev5jy8vt9p Ай бұрын
손가락 장갑끼고 영상만드시면 조회수가 더 오를거 같아요
@dollpy-bikemodeller 28 күн бұрын
넵 ㅎㅎ 장갑끼면 답답하고 아무래도 감각이 떨어지는데 한번 해보겠습니다~
@pepejose4958 Ай бұрын
tanga guchi, que color metalizado usaste para pintar la bañera?
@dollpy-bikemodeller Ай бұрын
Utilicé pintura laca coreana IPP Superfine Aluminium.😄
@shayne6287 Ай бұрын
Awesome build, where did you find the reference photos?
@dollpy-bikemodeller Ай бұрын
thank you All reference photos were obtained through Google search.😄
@hernanyepes4726 Ай бұрын
Cómo estás amigo , podrías decirme cuantos conectores eléctricos usaste en este modelo ?
@dollpy-bikemodeller Ай бұрын
No sé el número exacto de conectores eléctricos utilizados en este modelo, pero probablemente se utilizaron entre 20 y 30.😄
@joemoore4027 Ай бұрын
Very clean. impressive build and use of the different metallic colors.
@dollpy-bikemodeller Ай бұрын
Thank you very much for your kind words even though I am still lacking in skills.
@rouved Ай бұрын
이 분의 손 동작은 비교적 투박해보여 나도 따라할 수 있겠다는 생각을 하게 하지만, 그 결과물을 보면 대단히 섬세해서 결국 따라 만들기를 포기하게 합니다. 재능과 끈기가 대단하시네요.
@dollpy-bikemodeller Ай бұрын
좋은 말씀 감사합니다. 그런데 사실 많이 만들다보면 저정도는 하실수 있습니다. 어떤 장르던지 다작이 실력을 늘게하거든요 ㅎㅎ
@janvanrenselaar5998 Ай бұрын
Yes the Ferrari with wich Nikki Lauda won the 1976 GP. I was 12 years old and got the day at the races as my birthday gift. Never forget that screaming engine and the smell of the exhaustgasses. Now i am nearly 61 years old and ordered 2 weeks ago this kit in Japen. To build my first big scale Formule 1 car..
@dollpy-bikemodeller Ай бұрын
I hope I didn't ruin your memories with my poor skills. I am 50 years old this year, which is quite old, but you can still enjoy your hobbies more. I hope you are always healthy.
@janvanrenselaar5998 Ай бұрын
@@dollpy-bikemodeller no your skills are better than mine. Don,t worry about that. And healthy? Well that is something different after 1 year of chemo therapy and getting 3 weeks ago my 2th pacemaker and after 3coma,s the last 16years in am still happy to walk around and not sitting in a wheelchair. But those are things to overcome . And this hobby is my therapy to keep me busy,time enough and i am a slow builder. Btw with this big scale kit i have bought also the Fujimi Nissan Nismo in 1-12. I use to build 1-24 but my hands shaking and bad eyes made me go bigger. Big Scale,bigger fun with the airbrush i hope. And your model came out very nice.
@dollpy-bikemodeller Ай бұрын
@@janvanrenselaar5998 Thank you for those kind words. I hope you always stay healthy and enjoy your hobbies for a long time. I also have some presbyopia, so I can't work without a magnifying glass, but it's not a big inconvenience. May God bless you.
@janvanrenselaar5998 Ай бұрын
@@dollpy-bikemodeller Thanks and same to you. Btw my eyes are so bad that i need a magnifying glass to see through a magnifying glass op the small part is on his place or that the tube is connected good to the radiator and i wear glasses. With that realy small stuff like in the 1-24 scale i am helpless and blind as a bat.
@dollpy-bikemodeller Ай бұрын
@@janvanrenselaar5998 Actually, it is difficult for me to work with 1/12 bike models or 1/24 scale cars because they are small. But let's do our best. To continue enjoying this fun hobby in the future!
@user-em5rt6eh6m Ай бұрын
very nice work, but the original seat belts, they are not red and sabelt
@dollpy-bikemodeller Ай бұрын
thank you I know that seat belts come in different colors. In fact, as mentioned in the video, the damper spring was originally black and the exhaust muffler was originally matte white. Please understand that I created it differently from historical evidence.😅
@user-tq8qe2zt1w Ай бұрын
An excellent job on that DFV engine. Your skills are among the best!👍
@dollpy-bikemodeller Ай бұрын
thank you Please understand that some parts were painted differently from the actual historical vehicle at my own discretion.😅
@user-tq8qe2zt1w Ай бұрын
Fantastic job👍 and thanks for sharing. Looking forward to your future builds!
@dollpy-bikemodeller Ай бұрын
thank you My skills are still lacking, but I will try harder.😆
@PetrKrska-gd5ep Ай бұрын
Nádhera jako vždy. Je to uklidňující pastva pro oči. Nejhorší je vždy čekat na Váš další model. Ať se Vám daří co nejlépe. S úctou Pietro.
@dollpy-bikemodeller Ай бұрын
Děkuji vám vždy za vaše milá slova. I když jsou některé části odlišné od historického výzkumu, děkujeme za váš kladný názor. být vždy zdravý
@karl53133 Ай бұрын
Nice build looks excellent....
@dollpy-bikemodeller Ай бұрын
thank you My skills are still lacking, but I will try harder.
@seewinjg Ай бұрын
못 본 몇 달 사이에 많이 만드셨군요,.. 잘 보겠습니다. 언제나 추천 한표~~
@dollpy-bikemodeller Ай бұрын
감사합니다~ 자주 들러주세요 ㅎㅎ
@AlbertD711 Ай бұрын
Thank you for another great video and showing your mini vacation. Your country has some beautiful scenery.
@dollpy-bikemodeller Ай бұрын
Thank you always for your kind words. I will try to take better videos😃
@user-fr5li8pn7b Ай бұрын
머플러 저도 이제품으로 하고 싶은데 지금은 구할수가 없나 보군요 ㅠ
@dollpy-bikemodeller Ай бұрын
지금은 판매를 하고 있지 않지만 페이스북을 보니 다시 활동을 시작한것 같습니다
@AlbertD711 Ай бұрын
I have really been enjoying your videos and learning from all of them. May I ask how long it takes you to complete a bike model? Thank you.
@dollpy-bikemodeller Ай бұрын
It depends on how the details are done and how it is produced, but it usually takes about 4 weeks to complete the production.😅
@AlbertD711 Ай бұрын
@@dollpy-bikemodeller thank you. I am about ready to start my first build with a Hobby Design set on a Tamiya Ducati 1199S. I have built 3 from the box with no upgrades.
@dollpy-bikemodeller Ай бұрын
@@AlbertD711 I hope it's completed nicely😄
@7149816 Ай бұрын
真的⋯這樣真的很變態 害我 我都忍不住手癢了 Thank you for sharing
@James-rg4kv Ай бұрын
Which clutch kit did you use please
@dollpy-bikemodeller Ай бұрын
I used 3D printer parts made by myself. It is not a general commercial product
@mamilsg Ай бұрын
Hi, thanks for sharing your build. It's very beautiful. Would you rebuild the wheel spokes with piano wires if you get another kit? 2:16
@dollpy-bikemodeller Ай бұрын
thank you The detail is good without having to recreate the wire spokes with piano wire. I don't plan on making wire spokes with piano wire
@jaymoney2112 Ай бұрын
This is art at it’s finest I have a real zx10r and even the real one doesn’t have this much detail
@dollpy-bikemodeller Ай бұрын
Thank you for those kind words. I'm jealous that you actually have a ZX-10R haha.
@jeanmariegobaut2441 2 ай бұрын
Magnifique de précision sur les modèles Meng , exellent travail, bravo. JMG.
@dollpy-bikemodeller Ай бұрын
Thank you for those kind words 😄
@user-re3oq9ho4z 2 ай бұрын
갖고싶어요!
@dollpy-bikemodeller Ай бұрын
ㅎㅎ 키트가격이 워낙 비싸서 ㅠㅠ
@user-hl3ly3xi4h 2 ай бұрын
완성품 아니였군요
@dollpy-bikemodeller 2 ай бұрын
넵 프라모델입니다 ㅎㅎ
@user-hl3ly3xi4h 2 ай бұрын
@@dollpy-bikemodeller 저는 완성품을 뜯어서 튜닝한것줄알았어요 저도 제작이나 도색을 해보고싶은데 많은 도움받아가겠습니다
@dollpy-bikemodeller 2 ай бұрын
@@user-hl3ly3xi4h 넵 자주 들러주세요~~
@gerryedwards523 2 ай бұрын
Beautiful work,as usual.
@dollpy-bikemodeller Ай бұрын
Thank you for those kind words.
@patrickpierce6904 2 ай бұрын
Can you tell me what yellow paint did you use to match the decals?
@dollpy-bikemodeller 2 ай бұрын
All yellow parts of the decal were cut out and matched to the color of the body. The paint used was IPP's deep yellow.
@fjbilbeny 26 күн бұрын
@@dollpy-bikemodeller Gracias por tu video. Me podrias decir equivalencias del Deep Yellow de IPP en otras marcas? En España no se puede encontrar esa marca. Muchas gracias
@dollpy-bikemodeller 23 күн бұрын
@@fjbilbeny Deep yellow is actually similar to camel yellow from other brands😅
@fjbilbeny 17 күн бұрын
@@dollpy-bikemodeller gracias
@AlbertD711 2 ай бұрын
Excellent video. Thank you.
@dollpy-bikemodeller 2 ай бұрын
Thank you for those kind words. Please stop by often
@PetrKrska-gd5ep 2 ай бұрын
Hezká práce příteli. Ostatním zájemcům doporučuji všechny závity předvrtat závitníkem a jako doplněk použít Transkit od PAOL KOO - jsou tam odpovídající šroubky. Model je to nádherný. Gratuluji a jsem s úctou - příteli.
@dollpy-bikemodeller 2 ай бұрын
Moc děkuji za milou radu^^ Hezký den
@goforitpainting 2 ай бұрын
Really cool. 👍
@dollpy-bikemodeller 2 ай бұрын
Thank you for those kind words. Please stop by often
@mauserkk98 2 ай бұрын
Better than the real thing .
@dollpy-bikemodeller 2 ай бұрын
Thank you very much for your kind words😄😄
@davidpowell6098 2 ай бұрын
As an armour modeller, and motorcycle lover, I must admit you are a master of your craft, thank you for sharing your skills with us. Absolutely excellent work.
@dollpy-bikemodeller 2 ай бұрын
Thank you for your kind words, even though I still have many shortcomings. I will try harder
@joemoore4027 2 ай бұрын
The detail sets are beautiful but some of their instructions are terrible and hard to understand how to put together ! Your video on how to assemble their parts is fantastic help ! Thank you for helping us modelers out !
@dollpy-bikemodeller 2 ай бұрын
Next time, we will try to make a more helpful video. Thank you for those kind words
@joemoore4027 2 ай бұрын
Thank you, thank you ! Now I know how to put that thing together ! The instruction sheet is terrible !
@dollpy-bikemodeller 2 ай бұрын
I'm glad this recipe helped you😄
@paulalexander9878 2 ай бұрын
How did you make the tail modifications
@dollpy-bikemodeller 2 ай бұрын
You can see it starting at 19:43 in the video.
@PetrKrska-gd5ep 2 ай бұрын
Krásná práce, gratuluji. Máte nádherné kovové barvy.😃😃😃
@dollpy-bikemodeller 2 ай бұрын
Děkuji za milá slova^^
@sierrahobbys1883 2 ай бұрын
Another beautiful piece. I'm not a lover of polyurethane, or 2K. It's always been a hit ,or miss for me. I stick with GX Super Gloss 3.😊
@dollpy-bikemodeller 2 ай бұрын
Thank you always for your kind words. Personally, I find the urethane finish more comfortable.😄