1/9 MENG MODEL kawasaki H2R 'ninja' TRICSTAR
Рет қаралды 6,353
Жыл бұрын1/9 MENG MODEL kawasaki H2R 'ninja' TRICSTAR
Buying site for 3D printer chain
3D프린터 체인 구매싸이트
www.prettymessystudio.com/
제작에 사용된 디테일업 부품은 아래의 디테일샵에서 구매하실수있습니다
한국에 계신분은 프리티 메시 스튜디오의 제품도 디테일샵에서 구매가능합니다
www.detailshop.co.kr/
Detail-up parts used for production
제작에 사용된 디테일업 부품 목록
SPS-069 1/9 Kawasaki Ninja H2R Movable Metal Front Fork Set
D950 1/9 Kawasaki Ninja H2R Trick Star Decal Museum Collection
1/9 MC13 MENG 1/9 Kawasaki H2 / H2R Detail-up Chain and Sprockets set
1/9 MC23-9 1/9 Exhaust Springs and Hooks
Falcon Scale Models FSM10 Detail for 1/12 scale models: Electrical wiring connectors
TD23233 Top Studio 1.0mm Hex Rivets (A) Brass
TD23243 Top Studio 0.8mm Hex Rivets (B) Brass
TD23237 Top Studio 0.8mm Hex Rivets (B) Silvery
TD23011 1/12 1/20 1/24 탑스튜디오 Top Studio 커넥터 세트 Electronic Connectors Set B
TD23209 탑스튜디오 Top Studio 1.0mm Hex Fitting
TD23214 탑스튜디오 Top Studio 1.0mm Hex Fitting Tapered
TD23272 1/12 Banjo Fitting Set C
TD23183 1/12 탑스튜디오 Top Studio 호스 조인트 세트 resin hose joints mixed set A
TD23027 1/12 탑스튜디오 Top Studio Assorted Details for 1/12 MotoGP
TD23075 1/12 탑스튜디오 Top Studio 포뮬라 1 와이어 밴드 세트 Wire Band Set
TD23045 1/12 1/20 1/24 탑스튜디오 Top Studio 수축 튜브 1.6 mm Shrink Tube (Black)
TD23054 1/12 1/20 1/24 탑스튜디오 Top Studio 수축 튜브 2.0 mm Shrink Tube (Clear)
TD23204 1/12 1/20 1/24 탑스튜디오 Top Studio 메쉬 호스 1.5mm braided line
HD05-0008 Stainless Steel Tube 0.4mm X 200mm
HD05-0009 Stainless Steel Tube 0.5mm X 200mm
HD05-0013 Stainless Steel Tube 1.0mm X 200mm
MSMA038 Flexible Wire 0.30mm diameter x 2m (Red)
HD05-0019 Hobby Design 0.38mm Wire (Black)
HD05-0008 Stainless Steel Tube 0.4mm X 200mm
#meng
#kawasaki
#h2r
#tricstar
#scalemodel
#프라모델
#motogp
#wsbk
@teddyjones8027 Жыл бұрын
Beautiful work as always my friend, Thank you for sharing your builds. Everyone keep yourselves and love ones safe and healthy and remember to SMILE 😊😊
@dollpy-bikemodeller Жыл бұрын
Thank you for always being kind and kind words. Have a nice day
@cemdrahsan270 Жыл бұрын
Superb... very nice job..
@dollpy-bikemodeller Жыл бұрын
thankyou friend 😀
@PetrKrska-gd5ep Жыл бұрын
LUXUS - velmi hezké - gratuluji.
@dollpy-bikemodeller Жыл бұрын
thanks for the kind words friend
@Roosterfox Ай бұрын
Love this I am thinking of purchasing this kit and was wondering how difficult is it to make the belly pan? Also why do you add weight to the inside of the engine?
@dollpy-bikemodeller Ай бұрын
This kit is not that difficult to build. I think it will probably be easy to make. The purpose of adding weights to the engine is to give it a heavy feel. If it's too light, it looks like a toy. 😄
@karl53133 11 ай бұрын
I want to do a lot of upgrades myself but this is out of this world excellent job....
@dollpy-bikemodeller 11 ай бұрын
It's a job that anyone can do ^^ Thank you for the kind words
@karl53133 11 ай бұрын
@@dollpy-bikemodeller And I don't think you realize how talented you are ...All the best
@Hongkongers20033 Жыл бұрын
1/9😍
@dollpy-bikemodeller Жыл бұрын
Thanks always friend!
@plamodelmania5591 Жыл бұрын
이것도 멋지게 만드셨네요 👍👍
@dollpy-bikemodeller Жыл бұрын
감사합니다! 멩모델 HP4의 품질이 좋아서 이것도 기대했는데 생각보다 디테일이나 품질이 좀 떨어지네요.
@plamodelmania5591 Жыл бұрын
@@dollpy-bikemodeller TB데칼 같은 느낌이죠ㅋㅋ 이거말고는 방법이 없는 ㅋㅋ 맹 모델은 초창기부터 안좋았어요 그나마 요즘 좋아진거지~~ 초창기 10년전은 단차도 안 맞아서 조립하는것도 힘들었어요 ~~ 고생 많으셨습니다👍👍
@dollpy-bikemodeller Жыл бұрын
@@plamodelmania5591 TB데칼같은 느낌 맞습니다 ㅋㅋ HP4 만들어보고 다 그만큼 하겠지 했는데 배신때리는...디테일업 안하면 더 볼품없어질것 같아서 최대한 디테일업했네요 ㅋ
@blueovalOdell Жыл бұрын
Nice work
@dollpy-bikemodeller Жыл бұрын
thankyou friend! 😀
@bostonbudz4616 Жыл бұрын
Great job again 🤙
@dollpy-bikemodeller Жыл бұрын
thank you for your kind words
@mooncake222 Жыл бұрын
Stunning works 👍🏻 Do you sell your finished bike ? I’m quite interested to get one 🙈
@dollpy-bikemodeller Жыл бұрын
Thank you very much for your interest in my bike. I mainly make bikes for production requests, so I don't have any bikes to sell right now. However, if you request it, I can make it and sell it to you. However, since I am in Korea, I cannot be held responsible for damage during delivery in areas other than Korea, and since a lot of detail-up parts are used, the production cost may be more expensive than expected. Please contact us at zepper2@naver.com.
@ramanjeet1111 9 ай бұрын
HOW MUCH IS IT FOR
@dollpy-bikemodeller 9 ай бұрын
This bike model is already sold out. Thank you for your interest😅
@ramanjeet1111 9 ай бұрын
@@dollpy-bikemodeller 😁😁😁 how much in general
@dollpy-bikemodeller 9 ай бұрын
Prices vary for each model, but this one sold for $800.@@ramanjeet1111
@karl53133 11 ай бұрын
The front forks on this model are worse than bad...!! And the fact you need to buy new forks on a model at this price is not on ...!! and don't follow the plans don't put the discs on the wheels first as I ruined my perfect spray job on my wheels trying to fit them in a horrendous design....
@dollpy-bikemodeller 11 ай бұрын
Because this kit is Meng Model's first product, the details and quality are not good. I agree with your opinion
@karl53133 11 ай бұрын
@@dollpy-bikemodeller Thanks for the reply as I'm not new to model building glad it's not just me...!!
@dollpy-bikemodeller 11 ай бұрын
Meng Model's BMW HP4 is much better than this kit. I recommend HP4 over H2R@@karl53133
@karl53133 11 ай бұрын
@@dollpy-bikemodeller Thanks for the reply got the BMW HP4 race to build as well hopefully that will go better...!! don't get me wrong I really enjoy making the Kawasaki detailing engine...etc other than working the holes to get bits to fit level / in places which I didn't really mind but hated the forks filling and sanded mine and resprayed now look ok but hmm...!! All the best and as I said before your work is excellent I can only dream of getting as good as yourself.
@karl53133 11 ай бұрын
@@dollpy-bikemodeller Great good to hear thanks again subbed ....
Gab tech expo
Рет қаралды 1,8 МЛН
FIGHTING CINEMA
Рет қаралды 15 МЛН
BattleBots
Рет қаралды 2,3 МЛН
Dollpy- bike modeller
Рет қаралды 4,6 М.
Great Scene
Рет қаралды 2,5 МЛН