Es touch? Is touch?

What's a flat blade Phillips? ha ha.. (JK) Excellent video. Easy peasy! Thanks for taking the time to post it.

Great instructions, thanks a lot!

Thannk you.

Wow. Finally found a video that answered what I needed although not on purpose. See, my hinge works just fine. The cover is just missing. (Bought used) so seems like I don't have to open it up. I just need to get the part and snap it on. EVERY SINGLE VIDEO ADDRESSES THE THE HINGE RAIL/SCREEN AND NOT THE COVER! I guess it's too simple of a fix? I just want to be sure I can snap it on and not mess it up or have to go and ask to remove a bunch of things for it. Its also like 10$+ and only comes in pairs of two it seems so yah. Would like to confirm.

LP156WH3 (TL)(SA) Can you please provide the link for the controller board

Price kitna hai

I have one of these. My mom bought it in 2013 for $1200 because her first computer, a Dell inspiron 1545, had stopped working, and needed one for college at the time. She stopped using it after I screwed up her windows installation (I was young at the time.) I'm using it now for video editing and various other tasks.

On amazon there is a 30 or 40 pin screen for sale for the Inspiron 15 3521. How does a person know what pins their screen is?

Thank you. The instructions on the Dell site have you taking the entire laptop apart. This worked. My model is different because I have a touch screen. There's no bezel. It's actually rubber trim going around the edge of the touchscreen. Some of mine crumbled off because the laptop is 9 years old. Be careful because there's wires connecting to the touch screen for the camera and the screen. The LCD screen has 2 tabs on top and 2 tabs on bottom with two holes on each tab. They connect to the laptop with black screws. Don't undo any silver screws! Mine connected via the inside holes of the tabs. This video shows the outside holes. The hardest part is the hinge covers. I couldn't figure it out and ended up breaking mine but I found some on eBay for $7. Be careful with the screwdriver on that because there are wires going through the hinges on both sides. But other than that it's fixed my laptop. No more pink lines and half-frozen screen. Great video!

Can we add 1080 p 120 fos screen in this model

Thanks brother...🤘for make this video.. its worked good

Hello sir. I want to remove the display completely and not install the other one. What shall I do with the WLAN switches?

Is that 40 pin or 30 pin?

Hey ratholeproductions, I watched several how-to videos on how to swap out a laptop screen on the Dell Inspiron 15-3537/3521/5537/5521 model. Yours was by far the clearest in terms of "how-to", showing the process clearly step by step. I followed it step by step to success. The guitar pick tip for getting the bezel off was really cool. I borrowed a pick from my neighbor. So, your process saved me at least $230, maybe $280, on having it fixed at a repair shop. That kind of expense would have made me want to just buy a new computer, because my Dell Inspiron is five years old, though it seems to have no other problems just now. So, Thank you for forestalling my having to spend about $500 or $600 on a new one, when all I do is check email and browse the internet and word processing. Again, my gratitude!

Thanks for the video! Quick, thorough, and to the point. Only thing is it was too dim to see the orientation of the tabs to put back in at the end, but I figured it out. My son is happy to have his laptop back.

Thanks!! It was difficult getting those hinges off but now I have a working screen again!!!

Is it a 40 pin connector or 30 pin connector

Thanks. This helped me replace my screen. I found it best to take the old one out before buying a new one to verify the PN. Some of these are not interchangeable or have 30 pin or 40 pin connectors.

Hi! Great and helpful video! Thank you! Would I be able to apply a touchscreen as a replacement instead?

You don't need to remove the hinge tabs/covers!!! I ended up breaking the ones on the back, and the bezel came off fine without touching the ones on the front. Thanks for the bad advice!

Thank a lots you have save my money. I have fitted my laptop lcd own.

Thank you so much , fitted a new screen with no problems thanks to your instructions. :)

Thank you so much for this tutorial! Best Buy wanted to charge me $300 to replace the LCD screen. Not happening! Now I can buy the screen and do it myself.

Professional job and fun to watch

I have same problem and same laptop

can u please tell me how much pin it have i mean i want order that LCD but i am not sure about the VGA cables pins can u help me i don't want to open my laptop to check only i think its 40 pins But i am not sure

Awesome video. Everything is step by step and it's easy to follow. I was nervous trying to fix my laptop screen but this video helped tons!

Thanks!

Great instructions. Piece of cake. My guitar picks are too flimsy, so I improvised with the back side of a carpet knife to separate the bezel. Overall, very simple repair and well worth the $40 screen. Thanks for the video!

Crystal clear instructions! Thanks so much! It took me 15 minutes and I'm looking at my repaired screen as I write! One tip to future followers... Replacing the hinges at the end is easier if the laptop is closed, held vertically with hinges on top. Insert each hinge from the outside with smooth curved side going into the opening and beveled side uppermost. Gently push down till it clicks, then open laptop and push down on the screen-side of the hinge till it clicks. You may have to close the laptop and push from the back for clicks again, but this is much simpler than trying to get the hinges in from the open screen side.

can someone help me.. I have problem 1 year still i cant find solution.. i have laptop dell 3537 and cant install amd driver, just intel hd..... but i want to play better games with amd because amd is 2GB and intel hd is 1gb... when i install driver for amd i get black screen when log in to windows maybe 2 to 3 minutes is ok then black screen...i turn offf all sleep mode etc but still have some issue i made million problem solving things i found on forums and still nothing...?? does someone have same laptop and if have and dont have this problem please tell me the steps what drivers and where from you download to make mine good.. i will pay money

thank s for the vedio but i have a probleme while i m working with my lop top every little move make the image turn to black and after move fora while i get the image back plz any idea my english is not good so i m soory

Where did you get the screen at?Link?

i have the same laptop, can i buy a new touch screen digitizer from ebay to replace my screen? (My default screen is not touchscreen) www.ebay.com/itm/like/251889939336

worst screen of this laptop !!! The screen quality is pathetic in fit and finish !! Whoever designed this to lock the screen with small plastic tabs came up with the worst idea !! The screen gets pressure lines from plastic cover holding the screen !! An LED screen could have done better . A LCD screen is a design defect for this laptop !!

Not Clear Vedio, But Useful

thanks wolfman

I've never written a review on anything, I'd like to say thank you for uploading this video. I was able to get my pc back up and running, after my daughter broke the screen. Thank you!!!

Where can I order that exact screen and what's the parts number located?

Thanks man you saved my life and a lot of $$ too

Those hinge covers are a bugger to get off! They went flying so hold on to them as you prise them out.

Thank you. I did it and saved me some money

Thanks a lot Sir, people like you prevent big companies to rip us off. 200$ here to change the screen. For something that takes 10 mins and cost 60$ tops for a new LCD. Thanks again Sir.

Thank you very much

Thanks man 😊 it worked

Thanks a lot

Hi mate, is this the same process for the touch screen versions? Thanks

Much thanks! Had my fingers crossed when I first fired it up because I wasn't sure if it was the screen or some other issue, but it works perfectly now, woo!

Excellent video. I had a bit of trouble getting the hinge covers back in, until I figured I was putting them in upside-down. Saved me a couple hundred dollars, thank you.