sigor2011

Пікірлер

@teocekn 3 күн бұрын

Awesome video . helped me contributed 1 less item to e-waste.

@kurtengel6029 21 күн бұрын

i recognize those crappy tire screwdrivers

@thesmuler5627 Ай бұрын

Circuit design usually employ resistors in parallel with capacitors to drain them almost immediately but that is a good practice when removing airbag just in case.

@nishadesai8356 Ай бұрын

Which Screw Driver you have used to open to screw.? Any link for good screw driver which I can get from Amazon.?

@sigor2011 Ай бұрын

www.amazon.com/dp/B00MUJU33S

@nishadesai8356 Ай бұрын

@@sigor2011 Thank you so much @sigor2011 for providing Amazon URL. Which Screw driver generally you have used to open the screw in Jabra Evolve 75 headphone.? T3/T4/T5/T6/X ??

@sdrivegarage Ай бұрын

Thank you. I can confirm that this fixes a sticky door. My rollers were not obviously broken like yours, but the door was extremely difficult to close. After replacement, it's smooth like butter.

@cssAldi Ай бұрын

05:27 best part

@jeffcastillo9063 Ай бұрын

I replaced my blend door actuator, but now my ac wont turn on. The ac light blinks.

@sigor2011 Ай бұрын

Unless you did something wrong, those should not be related. I had the same, and ended up rhat A/C charge level was too low, ended up being leaking AC condesnsor.

@jeffcastillo9063 Ай бұрын

@sigor2011 Thanks for the reply. I actually let it run for awhile, and then turned my truck off and on. It started working, probably just needed to reset.

@md.emdadulhaque206 Ай бұрын

Hi! I watched your KZfaq channel and your content is very good. I am a big fan of your. I have proven strategies for optimizing KZfaq content to rank higher in search results. Let's work together to optimize your video titles, descriptions, and tags for maximum visibility. Thanks

@CopperheadArcher Ай бұрын

Thank you for this video it has solved a great problem for me!

@Jimiish Ай бұрын

used this guide today on a 2014 ... thanks worked like a charm

@YoGhostface Ай бұрын

Excellent video! That seemed like a lot of work (for me) but watching you do it step by step makes it a possibility for me. Thanks!

@sayedhofiani8041 2 ай бұрын

will this fix the issue with one side (the battery side) not working.

@sigor2011 2 ай бұрын

No idea. Your issue sounds more like a broken wire.

@Henrik19670202 3 ай бұрын

Thank you! You just saved another headset.

@jameslund221 3 ай бұрын

Good job 👍🏻

@medaveon 3 ай бұрын

Thank you! Great video, so helpful.

@Charles_-zw6zk 4 ай бұрын

Does Mazda specify the torque for this anywhere? On my NKG plugs it illustrates the torque with the amount of turn you should do, but I rather had a number.

@sigor2011 4 ай бұрын

Probably, I just use the turn count as suggested. Torque number hard to apply as long extension make it harder to reach. I don't kmow anyone using Torque wrench

@ankorot 5 ай бұрын

thank you! btw, i use these headsets for 4 years and i replace them every 2 years because mic stops working: battery has never died but mics die regularly due to movements up and down and cable breaks

@lwrgbr 5 ай бұрын

great video, our car has this problem, will take to dealer tomorrow

@sigor2011 5 ай бұрын

I you got the tools, parts are cheap enough to throw at the problem and hope for the best or just pay the dealer to do the work skipping diagnostic fee. So far I had no further issue with this message.

@Bignene628 5 ай бұрын

Why not remove the booth easier

@sigor2011 5 ай бұрын

If works for you, go for it! I was not able to even afternremoving the retaining ring as seemed glued on and I did not want to rip it.

@agh0x01 5 ай бұрын

Procedure for Voyager V4220 is very similar to this, but the tiny battery is in the same side of the headset as the microphone, micro USB port, etc. The battery is different to the example in this video as it is has the code 1ICP4/25/38 (25 x 38 mm, I believe), and has 3 wires (red, white, black) instead of 2. Looks like the white wire could be related to battery temp monitoring, or validating that the battery is supported by the device.

@lspudpage 5 ай бұрын

Thanks so much for your video. My speaker had stopped working on the battery side and I had no clue how to get inside to take a look. It was a broken wire, soldered in a replacement, all back together and working. You've saved me the cost of a replacement.

@Rikky2000 5 ай бұрын

Thanks for the video. Just replaced the battery on Jabra 75 which was completely broken. Now good as new, and the battery I ordered had the correct connector. Thank you!

@marcoflaviosolanorodriguez8816 4 ай бұрын

Hello my friend, Do you mind sharing the battery you bought that had the right connector?

@SK-qv5cm 2 ай бұрын

Same question as @marcoflaviosolanorodriguez8816 said here, would you mind please sharing the battery info of the one that had the correct connector?

@TexaSurvival 5 ай бұрын

My air blows cold but after a few minutes of startup, the air seems to get restricted at the vents and then blow behind the dash (sounds like defrost but I don’t feel anything up there). My set up is exactly like this one, no dual zone or anything, so which one needs replacing? Another video says my problem is the mode actuator and that it is on the driver side but your description here makes it seem like the one behind the radio.

@sigor2011 5 ай бұрын

There are a few actuators there. Often they are sold in a pack, can replace borh.

@slammedcc 6 ай бұрын

Thank you! My 2003 CRV starts again. I struggled for an hour with the small screw on the back of the ignition switch until I ran to the hardware store and got a long, thin, phillips head screwdriver. Came right out.

@apkungen89 6 ай бұрын

You can also calculate it. P = U * I which leads to Wh = V * Ah -> Ah = 1,3/3,7= 0,3514 Ah = 351 mAh

@sdrivegarage 6 ай бұрын

Thank you! Great job. You told me what I need to know without a lot of extra talking. I only wish I had replaced this part before I broke the handle trying to slam the door harder and harder. Sigh.

@reynierhernandez8260 6 ай бұрын

You do not need to remove the nut simply pull back on the arm and it gives you plenty of room to remove the blade

@sigor2011 6 ай бұрын

I did not have your luck. Broke the internal spring 1st rime. Removal prevented that issue on the 2nd change.

@Phalgun27 6 ай бұрын

what is the size of the heat shrink sleeve? what dia should we use?

@sigor2011 6 ай бұрын

Smallest you can get.

@raymondlaser 6 ай бұрын

Thanks ;) Battery swapped. Everything works.

@user-mh1ey2pz9f 7 ай бұрын

А при замене модуля надо ли снять клеммы с аккумулятора

@sigor2011 7 ай бұрын

I did not bother.

@lisamcbride5573 7 ай бұрын

Thank you so much. I have yhe sme washer with same problem!! This was a big help

@buddydudeguy5859 7 ай бұрын

There is no need to remove the blade arm assembly from the car. Once the plastic clip/cover over the nut is removed, you can pull the blade assembly away from the window and the blade can easily be rotated out of the arm.

@sigor2011 7 ай бұрын

I did not have this luck. Spring.inside the arm prevented this.

@iplparm 7 ай бұрын

Awesome, thank you!

@jimcopeland4011 7 ай бұрын

That 8mm deep socket threw me for a loop! Thanks for specifying the size!

@user-xt8mr1cx8u 7 ай бұрын

Nice work 🙏thanku ❤

@armandoramos1949 7 ай бұрын

Thanks for sharing, you made that look so easy.

@RottenTaco187 8 ай бұрын

Thanks easy install. I could reach the camera from underneath the bumper.

@paulb4uk 8 ай бұрын

Nice one mine would benefit from a new battery .

@linzeng6523 8 ай бұрын

Fixed mine with a piece of rubber tubing which I inserted over the piece of rod to reestablish the proper contact. No new parts, no visit to the dealers, took less than 10 min. It’s been months and working fine.

@cityhicks 8 ай бұрын

I just did this exact thing yesterday. Super easy. I also bent the microswitch arm down a little so it makes better contact. It really seems like a waste of $ to replace the entire assembly.

@geezer5357 7 ай бұрын

Admire your diagnostic chops and ingenuity. Do you mean that you used the tubing as a sleeve over the lever/rod to make it thicker? Was this just some tubing you happened to have lying around...? 🥸 I think I've just about figured out what you mean, but I wouldn't know where to put my hands on exactly the right diameter and thickness of tubing to achieve this?! Any pointers gratefully received-- not mechanically inclined, or usually a tinkerer, but foolhardy enough to try!

@geoffrey121148 8 ай бұрын

What’s the best radio can anyone give me the name on this radio thanks 😊

@dannydawson8934 8 ай бұрын

Where can I get this radio for my Mazda 5

@sigor2011 8 ай бұрын

I'd say Amazon or ebay. Place I got from.is closed. Maybe aliexpress?

@philliptoone 8 ай бұрын

What about the camber angle? Is that affected when you remove the two strut bolts?

@sigor2011 8 ай бұрын

Not sure. It may be affected but I did not not check on the alignment machine after. They are not camber bolts, so I did not worry.

@philliptoone 8 ай бұрын

@@sigor2011 Thanks for the info. I'll not worry about camber angle.

@user-nn9xn3vi8n 8 ай бұрын

Do you have any videos of the wiring? I need to reattach some in my headset.

@sigor2011 8 ай бұрын

Sorry, no

@Catalinbut 9 ай бұрын

thanks for posting this - very helpful. it would be a shame to have to change a perfectly working headset only because of the battery

@kenyoung4222 9 ай бұрын

After several weeks of frustration, this was finally repaired under the Voltec Component Warranty per Technical Service Bulletin 19-NA-206 at no charge by a "REPUTABLE" GM dealership, Dave Kirk in Crossville, TN. Shout out to Leteshia (GM's/BBB customer service representative" and the customer service staff at Dave Kirk Chevrolet!"

@riojasvictor 9 ай бұрын

Does your truck not have a third actuator under the dash by your feet?

@sigor2011 9 ай бұрын

Probably... but was not broken.

@jsalentine24 5 ай бұрын

Mine does not. It’s a 2008 2500 Silverado work truck.

@riojasvictor 5 ай бұрын

@jsalentine24 I found the third actuator. It's right above and to the right of gas pedal behind a plastic duct. I drive a 2012 Silverado 1500 WT.

@emeresbestres1 9 ай бұрын

I have the same model. In my case when I close the door and press start I don't hear the door locking and the timer just counts down quickly then cycle ends. Do you think I have the same problem? Your video was exactly what I was looking for.

@sigor2011 9 ай бұрын

I had door error code. Can always try a new lock, not too expensive to throw parts 😊

@brandonwynne1261 9 ай бұрын

What kind of alarm was it sending out when it went bad? I can t read my display to see what the code is. I'm getting a constant alarm tone and puts the ski in limp mode.

@sigor2011 9 ай бұрын

My display was working, was saying something about oil. I can't recall now. I was not pushed into limp mode.

@JohnHumphries-ok7ev 9 ай бұрын

Great video! Thank you very much. I'm attempting this soon so wish me luck with less than an hour. Sidenote - I've always thought stubby's should be called chubby's too 😅

@ford9050 10 ай бұрын

My headset is in perfect shape and does not want to charge in the cradle or plugging it in. You think it could be battery?

@sigor2011 10 ай бұрын

It is possible. Hope not port damage. You can rake it apart and measure battery voltage, if it is below 3v, swap it. Cheap enough to try at least.

Ең жақсы KZfaq

Пікірлер