Thank you so much for doing this. The middle bolts on mine went further in. Did it do the same on yours?
@markspears11673 ай бұрын
The hair clip is a great idea!!! Inexpensive, easy and quick.
@MJ_Bass3 ай бұрын
You are missing out on the best part by not stretching the rubber and cutting with scissors to separate the strands lol. Great looking jigs! Too bad people will only buy "wire tied", thread tied is more than strong enough.
@flgator3113 ай бұрын
What is a good thread to use? I am new at this and want a thread that is strong and available in a lot of bright colors. Thank You
@ramblinman8844 ай бұрын
Stretch and cut the living rubber really slowly, cutting off only about 1/8th inch or so, and it will separate without having to do each strand by hand.
@oni52304 ай бұрын
What part of the lake were you fishing at, was it up closer to Ozawkie?
@hdayan19455 ай бұрын
Thanks for sharing.
@bradleyrussell19735 ай бұрын
Never tighten bolts until all are in place!
@jamesbaker70625 ай бұрын
Where do you get live Rubber
@FishYanker6 ай бұрын
Nice.!
@timothyriddlebarger46266 ай бұрын
Where do you get your jig heads?
@Paul-ke5lu6 ай бұрын
Great video! What color paint is the jig head. Looks shinny. Fantastic job!
@Paul-ke5lu6 ай бұрын
Looks like you use a Peak vise. Do you like it? I can't decide between Peak and Renzetti. Any input would be great!
@spyder27827 ай бұрын
What pole are you using
@Hookyhook17 ай бұрын
Mighty fine Tutorial You gained a new Sub this Glorious Saturday morning
@williammiller7357 ай бұрын
Good grief man, enough talking. This is ridiculous
@khuongpham_florida_usa7 ай бұрын
Hi. I need these 2 part to install trolling on my kayak ( 2 pieces on the bottom). Can you give me the name of these 2 part or the link to buy? Thanks
@freeagentangler51597 ай бұрын
Will you do a video showing us how to do multiple colors? Top and bottom colors for example.
@Davo22338 ай бұрын
Your cutting of the silicone and LR tabs sound ASMR sweet!
@WiscoHoosier2918 ай бұрын
Thank you for this showcase. I found it incredibly helpful when constructing my first bass jig.
@TreyFishing9 ай бұрын
Thanks for posting this!
@WilliamRockseo9 ай бұрын
What do you do to make your jig heads looks so nice? love the gloss
@jackstein54869 ай бұрын
I see quite of few guys putting their graph in the center of the new rail. What made you decide not to do that? Nice vid !
@PaulBFelixAdventures10 ай бұрын
Thank you. I had to use the short bolts on my Hobie 14 2023 kayak. Long bolts bottomed out.
@Glock-110 ай бұрын
I love the short shank hook jigs!
@jamescaspersamanthalintner476711 ай бұрын
My partner and I took third and big fish there three years ago in u.s.a. bassin. We would have took first place but we lost 2 x5 lb in the morning lol
@jamescaspersamanthalintner476711 ай бұрын
Where are you out of. I fish fort Scott all time. It has been a thinkfest there lately. I wrecked on them in the pre-spawn deep-diving jerkbait up by the dam and the outlet. A dd 22 has been good there out on the end of the points. Lower the water being solo there this year the fishing has been tough over All
@HughButler-lb6zs11 ай бұрын
He didn't install the clip that holds the locking rod in place.
@HeartlandMakesAndOutdoors11 ай бұрын
I hav ewatched a few of your crappie fy tying videos, fun stuff. Clicked on your channel, seen you fishing what I now call my home lake. I am still learning this lake, been fishing for crappie and catfish this summer. Man its been hot. Thanks for taking the time to share this video. I love this lake. I will be heading there in the morning for some more crappie fishing. Have a blessed weekend. PS New Sub here as well. Dale
@BigDaddyDuke10111 ай бұрын
Good job explaining how to tie the jig it looks awesome and the colors you choose were just right thank you for showing us.
@shred5 Жыл бұрын
Thanks for the video. I’m considering a Pro Angler and I will either do the same thing or put it right next to the seat on the right side (since I cast left handed)
@dinkbassr Жыл бұрын
Why do you use color floss if you then cover it with the wire?? You don't use any glue or anything to coat the wire and thread??
@pauleyedwin6056 Жыл бұрын
Your site is not up. Nice video. Appreciate you sharing.
@pauleyedwin6056 Жыл бұрын
Would love to see you tie more of your different colored jigs. Was going to look at what all you tied and maybe purchase a few but your website has expired????
@pauleyedwin6056 Жыл бұрын
Good video. I really like that jig. Thanks may have to purchase new mold. PS I liked and subscribed.
@TheShadowDraken Жыл бұрын
I love the video! This technique would be great for a wide range of colors!
@sweynforkbeard8857 Жыл бұрын
You should try making a jig using just the marabou like soft ends you throw away. It might work really well.
@johanalmqvist6754 Жыл бұрын
Is it possible to turn the bracket 360°?
@michaelvanbuskirk8845 Жыл бұрын
I use scissors to cut the living rubber when stretched. Far faster.
@user-dm6bs3yv4p Жыл бұрын
is there another material i can use for the flash
@nikkihill3199 ай бұрын
Tinsel
@Raykra11 Жыл бұрын
Definitely a largemouth
@whomitmayconcern Жыл бұрын
can barely hear
@bobbybass1944 Жыл бұрын
I enjoyed the video , just learning to tie my own jigs, so this video is a big help . Where do you recommend buying living rubber and silicone skirts ?? Definitely subscribing to your channel .
@applegatefishing Жыл бұрын
Thanks Bobby, glad the video was of help! For silicone skirts I don't have a good recommendation any longer, I use to get them from here though: www.fishingskirts.com/ Living Rubber (medium is what I use) from here: www.livingrubber.com/
@bobbybass1944 Жыл бұрын
Thank you for replying and answering my questions . I got all the tools I need , now I can order material. Thanks again !!!
@deanpolk8791 Жыл бұрын
Like it
@anthonynoe532 Жыл бұрын
Where did you find the sleeve for the graph cables?
@applegatefishing Жыл бұрын
Sadly I'm not sure you can get them anymore. TRCCovers was the company, and you use to be able to order custom length cable sleeves like this but I no longer see that on their website. trccovers.com/
@anthonynoe532 Жыл бұрын
@@applegatefishing thank you
@bobbyh177 Жыл бұрын
great video except im confused on some things. Why the wire and what's the "living rubber" for? why not just use 2 more black n gold tabs?
@applegatefishing Жыл бұрын
Thanks Bobby! The wire is just an extra barrier to keep the skirt in place. It is not a requirement, I prefer having the wire there versus not. Living rubber actually provides the skirt with more action / pulsating action when on the bottom, jigging or swimming the jig. There is a big enough difference in how silicone skirt material performs vs. living rubber that I put some living rubber in all of my jigs. The living rubber typically cost more than the silicone skirts. I prefer the aesthetic of the silicone skirt material along with the cost but I prefer the action of the living rubber. Hence the hybrid jig. Really just comes down to personal preference more than anything.
@bobbyh177 Жыл бұрын
@@applegatefishing gotcha!!! Thanks! I'm debating on getting into bass jigs, i tie a lot of crappie but haven't done any bass
@vonnidegroot5762 Жыл бұрын
*PromoSM*
@shawnyang1971 Жыл бұрын
what is the part # you have to mount your garmin to the h rail? Thanks
@applegatefishing Жыл бұрын
There are 3 components for that: H-Rail Ram Ball 1.5" - www.amazon.com/Hobie-Ram-Ball-H-rail-1-5/dp/B00OX573LC?fbclid=IwAR0g6JPFqnk5GqocOxkGLJUFzXDI6n_bCaEovbx_seiiPrWhIh-7FeQuG7U Double Socket Ram Mount Arm - www.amazon.com/RAM-Mount-Double-Socket-RAM-201U/dp/B000R4QS00/ref=pd_lpo_2?pd_rd_w=3fF4K&content-id=amzn1.sym.116f529c-aa4d-4763-b2b6-4d614ec7dc00&pf_rd_p=116f529c-aa4d-4763-b2b6-4d614ec7dc00&pf_rd_r=A9VDBM6D0CB4G4MQHBSK&pd_rd_wg=0OniV&pd_rd_r=cf3d693c-2832-4bf5-b5e5-b7130752a88d&pd_rd_i=B000R4QS00&psc=1&fbclid=IwAR1_00pQBVOfD6yvCq5HPQN2AKYCjEnmnPNaSopJHuJJpqR2OAbzFa-pt64 Ram Universal Marine Electronic Ball Adapter Plate - www.amazon.com/RAM-6-25-Universal-Electronics-Base/dp/B00CJPUPRC/ref=pd_lpo_1?pd_rd_w=3fF4K&content-id=amzn1.sym.116f529c-aa4d-4763-b2b6-4d614ec7dc00&pf_rd_p=116f529c-aa4d-4763-b2b6-4d614ec7dc00&pf_rd_r=A9VDBM6D0CB4G4MQHBSK&pd_rd_wg=0OniV&pd_rd_r=cf3d693c-2832-4bf5-b5e5-b7130752a88d&pd_rd_i=B00CJPUPRC&psc=1&fbclid=IwAR0qHP954qeELEr9NZiWfsQKVlheXSxWXrbRMOGh_Ok-owfFXJM3pVcckpU
@warrenridout9496 Жыл бұрын
Great video, helped me with my install. Did you do a video on running the wires for the motor?
@applegatefishing Жыл бұрын
Thanks Warren! Unfortunately I do not at this time although I do plan on replacing the wire I used with a better quality one at some point. I'll try to make sure I put a video together of that process when I do.
@WilliamRockseo Жыл бұрын
Those eyes are amazing.... do you have a tutorial for that? Thx
@applegatefishing Жыл бұрын
I don't but I suppose I should make a video showing my process for pouring / painting and eye placement for my jig heads. I'll add that to the list!