10 ай бұрын
11 ай бұрын
Пікірлер
@marcoforte3886 27 күн бұрын
You’re a legend! Thank you sir!
@Cars_and_Robots_ 23 күн бұрын
No problem! Glad that this helped :D
@pyroignis3305 4 ай бұрын
Trying to print my own as well got any tips
@Cars_and_Robots_ 4 ай бұрын
Higher infill would be good. If you don’t want high infill for the whole part, then you can apply a localized infill modifier to just the threads on your slicer software.
@sticklesstree8963 4 ай бұрын
Why did you cut the video if its real and not edited lol
@Cars_and_Robots_ 4 ай бұрын
You’re a genius
@riyaathkurban4092 4 ай бұрын
69 seconds could have been so better
@pyrofan1178 4 ай бұрын
It’s so good to see a fellow gentlemen
@Bise-qc8fw 4 ай бұрын
😮😅😮😮😮ووؤ
@Cars_and_Robots_ 4 ай бұрын
😂
@grimzombieapocalypse1484 4 ай бұрын
Awesome, keep on being amazing my man
@Cars_and_Robots_ 4 ай бұрын
Thank you! And you as well 🙏
@ticocup 5 ай бұрын
I want the original video to this dude absolutely killing it 😂 🤣 😂
@Cars_and_Robots_ 5 ай бұрын
😂 yeah this guy’s dancing is absolutely perfect. I found it as a template on CapCut
@abyssal616 5 ай бұрын
Thats pretty cool, is there really any difference from swapping from the taller shifter to the smaller one? Or is just more how you like that it feels.
@Cars_and_Robots_ 5 ай бұрын
Thanks 🙏 not really much of a difference in the actual shift feel. I guess I like it more because I designed it myself
@dartdetails 5 ай бұрын
i want one
@Cars_and_Robots_ 5 ай бұрын
Do you have access to a 3D printer?
@engineerblorp8104 5 ай бұрын
The other two who commented are just losers who don't have a 3D printer, nor creativity, nor anything meaningful thing in their life. I started out with my business by making custom shifter-handles. Now, due to my years of experience, I am an instructor at a college for 3D printing Design + manufacturing. Keep up the creative work!
@Cars_and_Robots_ 5 ай бұрын
Awesome! Very cool that you teach 3D printing. Thanks for the kindness 🙏 and best of luck with your business 🙌
@tobyhood3314 5 ай бұрын
…and you’re so broke and can’t afford another colour other than the one that came with the printer.
@Cars_and_Robots_ 5 ай бұрын
Lol
@kristiankappen7143 5 ай бұрын
Too cheap to but y what i want so ill make a shitty replacement
@Cars_and_Robots_ 5 ай бұрын
Lol
@zenus4270 5 ай бұрын
May I ask why though?
@Cars_and_Robots_ 5 ай бұрын
I wanted to try making my own so I’m testing out some concepts with my 3D printer
@zenus4270 5 ай бұрын
Alright, good luck 😊
@m.l.9639 5 ай бұрын
It looks ugly and cheap IMHO, sorry
@feanor4480 5 ай бұрын
Then you make one
@Cars_and_Robots_ 5 ай бұрын
Yeah it’s definitely not professional quality yet. I’m testing out the design and will try to make it look nice when I’m ready with a final style.
@Cars_and_Robots_ 5 ай бұрын
No worries. Definitely is a personal preference thing.
@stardreamix786 5 ай бұрын
nice!
@treadandtracks 5 ай бұрын
Love the stick tenth gen!
@Cars_and_Robots_ 5 ай бұрын
It’s a great car! 🙏
@treadandtracks 5 ай бұрын
@Cars_and_Robots_ Sure is. My 2017 has over 220k km, barely broken in.
@Cars_and_Robots_ 5 ай бұрын
@@treadandtracksthat’s so true. It’ll last a long time
@Maaaarz 5 ай бұрын
Damn, I hoped this will be something easier to swap out than that 😅 Btw, do you know what gauge the small wires inside the black one have?
@Cars_and_Robots_ 5 ай бұрын
Hey. Sorry I don’t know what gauge they are. Might be worth reaching out to Artillery directly. Best of luck!!!
@Bartek53477 6 ай бұрын
Lmao 3D printing is so cool
@DomDaBombTheUltimate 6 ай бұрын
Xd
@Mbrickiguess 6 ай бұрын
Very cool
@tinpotalex 6 ай бұрын
Whats the name of the printer and how much does it cost?
@Cars_and_Robots_ 5 ай бұрын
It’s the Prusa mk3s+ and it cost me around $1100 Canadian dollars including taxes and shipping
@lolbit.animations 6 ай бұрын
I NEED THIS SO BADLY LMAO😂😂😂😂
@Cars_and_Robots_ 6 ай бұрын
You can find the file online for free. MPPrints published it on Cults3D
@vinaykumarhs5509 6 ай бұрын
The rock what?!💀
@Cars_and_Robots_ 6 ай бұрын
😂
@richwoods82 7 ай бұрын
Would the printer work if you just disconnected the cable? As don't use heated bed anyway.👍
@Cars_and_Robots_ 7 ай бұрын
To be honest, I'm not sure. Though I will say there is a big benefit to using a heated bed - particularly for bed adhesion and warp prevention.
@mister_bald 8 ай бұрын
Didn't know a 3d printer could emulate the sounds of a campfire, it'll be real cozy in the winter.
@Cars_and_Robots_ 8 ай бұрын
I hadn’t even thought of that! Yes I agree
@chriss_fpv 8 ай бұрын
Is there anny lubrication. I had same Problem with a Filament wich someone put on the bench and and Spray wd40 in the surrounding 😢 useles Filament. Or is it static discharge 😂
@Cars_and_Robots_ 8 ай бұрын
Not in this case. This was due to moisture.
@MrTweedyjoe 8 ай бұрын
Moisture
@Cars_and_Robots_ 8 ай бұрын
Correct
@andrewpetrov7646 8 ай бұрын
the filament is wet and is boiling when going thro the nozzle
@Cars_and_Robots_ 8 ай бұрын
Correct
@EmotionalTree 8 ай бұрын
It's wet
@Cars_and_Robots_ 8 ай бұрын
Correct
@JustinMX150 8 ай бұрын
Air bubbles?
@Cars_and_Robots_ 8 ай бұрын
Incorrect
@daveclark9411 9 ай бұрын
"PromoSM" 🙂
@linkspyder Жыл бұрын
Hi; in my case all 2 red cables and the black one all broke; I've already replaced the red ones, but when it comes to the black one, inside there are 2 thin cables; I cutted the cable, but now dont know which one was connected; anyone know if there is some kind of polarity? thanks
@Cars_and_Robots_ 11 ай бұрын
Hey, sorry to hear. I'm not sure but I assume there is a polarity. Be careful about reconnecting them. I hope it works out! Good luck!
@NoidoDev Жыл бұрын
Hooooray, it actually worked. It was the black cable in my case. I opened the red cable in some places which looked questionable, but it's not broken. So I just used some tape to cover it up, I didn't cut it. I soldered the black cable and used some shrink tape, then put some insulation tape around the bundle and it works again. Nice.
@Cars_and_Robots_ Жыл бұрын
Great to hear it worked!
@karazero Жыл бұрын
I have the same problem with my anycubic kobra go, thx for this video, i try to fix like u do
@SPIDDEK Жыл бұрын
This is one of those videos... All the info you need, no unnecessary talk around it, short and sweet and well explained for every level of knowledge. From me there is only love and gratitude. So thank you!
@Cars_and_Robots_ Жыл бұрын
Thank you. I’m glad you enjoyed it!
@oscardesignstudios Жыл бұрын
I changed both cables and motherboard and still get that error. Temp goes from from a range between 60 to 70 and error comes up again..
@NoidoDev Жыл бұрын
In my case I didn't find the broken part, since there probably isn't one. Did you find another cause of the problem.
@oscardesignstudios Жыл бұрын
@@NoidoDev to me Is the full bed. Need to change the sensor, full bed Is convenient
@antonioeziofrascarelli5881 Жыл бұрын
Thanks for your quick and explanatory video. I fixed the power cable by resoldering them as you did. It would be possible to fix also the black double cable that goes into the main board?Or ti would be better to avoid messing with such thin things?
@Cars_and_Robots_ Жыл бұрын
I’m unsure which wires you’re referring to but I’m sure if you’re careful and know what you’re doing, it should be fine.
@antonioeziofrascarelli5881 Жыл бұрын
@@Cars_and_Robots_ Well... That's the main problem. I thought fixing/soldering the two red cables was enough, but the printer keeps freezing with the damn "MINTEMPERROR id: bed" error. The black cable seemed fine at the time so I didn't touch it. But this thing is driving me crazy.
@NoidoDev Жыл бұрын
@@antonioeziofrascarelli5881 In my case the red cables seem to not even be broken. So maybe it could be something else? These cables really should've been detachable replacement parts in the first place.
@NoidoDev Жыл бұрын
Noooo, I have no time and nerve for this right now. But thanks.
@Cars_and_Robots_ Жыл бұрын
I believe in you! You can do it! Bring that printer back to life 😁
@justin_wayne_elrod_jrod Жыл бұрын
Nice job and that car wash owner on the tri foam gun and foam brush needs to set it a little better but great video
@R462venom Жыл бұрын
I'm having this issue but im suspicious that its not the printing bed causing the problem but the temperature sensor on the hotend as the printbed heated fine and i'm in the middle of trying to repair my hotend. Just putting that out there in case someone else has this problem. Regardless, now that im aware of this issue, im going to reinforce the cable at the back of the printbed to help protect it against material fatigue (maybe with a spring wrapped around the cables or something. This should spread the forces along the entire length of the cable and stop it from bending at one point. As long as the cables are bending elastically and not plastically they shouldn't fatigue.
@Cars_and_Robots_ Жыл бұрын
Sorry to hear you’re facing the same issue. I hope you can get it sorted out. And yes, it’s a good idea to address this wire breaking issue before it happens. Preventative measures are good.
@Luizof Жыл бұрын
"easy"
@Oduncukiz Жыл бұрын
I changed my heatbed a month ago. Min temp error fixed. Now I'm having same error again. There is no broken or damaged wire there. Why this is happening again?
@Cars_and_Robots_ Жыл бұрын
Hmm. It's hard to say what could be causing this issue again. What I would do is check through each cable/wire. Wiggle the wires around individually to see if any one of them is causing the min temp error to occur. Then maybe check for any loose connectors or plugs. I hope you can solve this soon!
@Oduncukiz Жыл бұрын
@@Cars_and_Robots_ thank you for the answer. This time it was motherboards heat connector or something. Everything fixed. The problem was heatbed 22° and same time nozzle -15° if someone read this it can be motherboard heat connector.
@antonioeziofrascarelli5881 Жыл бұрын
@@Oduncukiz Same problem here... How did you fix it? Did you replace the motherboard or "cleaned" the connector?
@Cars_and_Robots_ Жыл бұрын
Replacing or fixing the board could be a challenge. I would suggest trying a new cable to see if that fixes it.
@9bstar Жыл бұрын
Finally someone that addresses a reasonable problem with this printer Im having the same problem and you sit saved me alot of troubleshooting. Liked and subscribed
@Cars_and_Robots_ Жыл бұрын
Hey! Thanks for subscribing! I'm really happy to hear that you were able to solve your problem as well.
@leiaooi4803 Жыл бұрын
Isnt that POCO????
@Cars_and_Robots_ Жыл бұрын
Yep. It is!
@heididenlinger9982 Жыл бұрын
Could you let the person inside the video while you wash the car
@Cars_and_Robots_ Жыл бұрын
Sure! Next time I’ll get more footage from inside.