Bass Jansson

Пікірлер

@user-hx8mc5uo1r 8 сағат бұрын

Why is your shirt on? Sébastien would not approve 🖖

@chasewatkins3096 8 күн бұрын

WHOizdisDoinkhthis syntheticktyepahalphabeticFAhKing

@antonioferreyra7320 16 күн бұрын

Qué tal hermano, disculpa que te escriba en español, mi inglés es un poco malo. Podrías explicarme un poco lo de la resistencia número 7? Estoy teniendo problemas de intermitencia en mis luces y creo que se puede deber a eso. Saludos

@JMizzlin Ай бұрын

Can hear the Kraftwerk 😍amazing cover!!

@TommyMerry Ай бұрын

This is SO fun and creative!!!

@bassjansson Ай бұрын

Haha thank you!

@DaNeOMiTe313 Ай бұрын

Dope. What synth board you got there?

@neilpk01 2 ай бұрын

Is it dangerous? Or is totally safe? Because i saw this things could be dangerous... I want to control four lights dmx. Please helpme bro. Greatings from colombia

@bassjansson 2 ай бұрын

Hi Neil, it should all be fine as long as you solder everything correctly. Biggest problem might be a short, but even in that case the computer will warn you to immediately unplug the device as it will detect the short. Just test for any shorts using a multimeter before powering the device for the first time. From my knowledge, there'll only be a big risk of damaging your computer when using an external power supply with more power, but my device in the video just uses the power of the computer's own USB port. Hope this helps!

@sir.adailson 2 ай бұрын

Muito bom 🤟🤟

@Sewandriy1997 2 ай бұрын

татуировка "ПАПА" - шик!

@Sewandriy1997 2 ай бұрын

и "МАМА"

@maxdamico3148 2 ай бұрын

That was hard

@ronanpage 2 ай бұрын

What an unexpected surprise to find this video on KZfaq. I love Chemical Brothers and I've never seen anything like your video. That was great work, man. It would be a pleasure to see more Chemical songs performed with all their talent. Congratulations! Greetings from Brazil!

@bassjansson 2 ай бұрын

Thanks Ronan! That's really great to hear :)

@bassistDanielLee 3 ай бұрын

You sound like Kermit the frog.

@kidamazed 3 ай бұрын

Well, this is brilliant (you legend), but why can't I buy this somewhere? I want to run lights from logic: MIDI to DMX, without additional software, just a plain conversion. I've been thinking about: DOREMiDi MTD-1024, and it's close but not exactly what I'm looking for. If i try to mimic your solution (or do you sell it perhaps?) is it then isolated? My computer is expensive and I have heard about things going horribly wrong with cheaper solutions.

@Blackain66 2 ай бұрын

why is the MTD-1024 not working for you? what are u missing there??

@kidamazed 2 ай бұрын

@@Blackain66 I actually bought it and it serves me well. It pretty much does what I want.

@stanislavschulezko1900 4 ай бұрын

😁👍👍👍

@bartfinders 5 ай бұрын

Ik heb hem ook gebouwd. De USB midi werkt perfect. Alleen de serial midi werkt niet. Ik kan data lezen en zie ook in de serial monitor dat er via serial wat binnen komt. Probleem is dat de lichten niet meer via dmx worden aangestuurd (tx doet het niet). Iemand een oplossing of een soortgelijk probleem gehad?

@bassjansson 5 ай бұрын

Hallo Bart, ik zou je kunnen helpen het probleem op te lossen. Je zou me een e-mail kunnen sturen met meer informatie. Belangrijk is dat je aangeeft welke pins je gebruikt hebt. Zie mijn profiel voor mijn e-mail adres!

@YershJRSZ 6 ай бұрын

As a massive chems fan, I approve ir! You've even got it right with psychedelic fkn, instead of funkin as they lied to medias just to get the airplay

@bassjansson 6 ай бұрын

Thank you! :D

@Cr4ven004 6 ай бұрын

I love it, very funny. Awesome. 😊☺❤

@bassjansson 6 ай бұрын

Thank you! :)

@BozInk 6 ай бұрын

Hell yeah!!!!

@GustavoTavaresGuto 6 ай бұрын

What pedal do you use to control the recording?

@bassjansson 6 ай бұрын

I build my own using Arduino! It's small and only has one button. I have also used the FCB1010, which also works great!

@luisurena9955 6 ай бұрын

I know you do this for the love of doing it, but this should be WAY more viewed. My god this is good

@bassjansson 6 ай бұрын

Thanks for the great comment! :D

@themurderhard 6 ай бұрын

How to vocal fx? 😮

@Retrostar619 7 ай бұрын

Really fun good cover, loved the valley girl style vocals too, fucking A!

@bassjansson 7 ай бұрын

Thank you so much! :)

@shamman303-yt3tj 7 ай бұрын

Nice work👍

@bassjansson 7 ай бұрын

Thank you! :)

@chillin_otb 7 ай бұрын

❤

@gian_accetta 7 ай бұрын

Fucking sick job mate 🎉

@bassjansson 7 ай бұрын

Thank you! :D

@irfansandhi3129 8 ай бұрын

Hello do you have 18i6 sound card driver for win 10? I looked for 18i6 drivers, none of them are suitable for Win 10

@bassjansson 8 ай бұрын

Hello, did you check this link already? It says to support Win 10. The download will contain the driver and Mix Control installers. Hope this helps! downloads.focusrite.com/focusrite/scarlett-1st-gen/scarlett-18i6-1st-gen

@rusky6759 8 ай бұрын

You're very skilled at what you do. You deserve more recognition! Amazing cover. And amazing performance. Feels really natural. The video has such a comforting feeling. Like an end of a good movie. Felt like i just watched Jojo Rabbit for the first time again. Absolutely incredible! Love from Croatia ❤️ Please never stop creating. 4:39

@bassjansson 8 ай бұрын

Hvala brate! I am very happy with this one too, I am glad you found it! Thanks for all the words. :)

@rusky6759 8 ай бұрын

Yo this is sick!!

@bassjansson 8 ай бұрын

Hvala! :D

@PO-mk6zp 8 ай бұрын

Hiii where can I find the exact code that you have used in this video ?

@bassjansson 8 ай бұрын

Hi! I do not have a branch with the exact same code at the moment, but if you go to my GitHub repo which is in the video description, you can find midi2dmx-direct in the src folder, this is an updated version which works practically the same!

@icarusofficiel2809 9 ай бұрын

Good Job !!! 👍👏

@bassjansson 9 ай бұрын

Thank you! 😃

@student22044 9 ай бұрын

Smashed it! 🤘🏻 Sab puts words together so well! I’m glad they’re starting to get the recognition they deserve ❤ Great bass BTW 😊

@bassjansson 9 ай бұрын

Thank you! :)

@JonValtandtheEvilRobots 9 ай бұрын

Great follow up. You’ll eventually see all this in action over on my channel.

@bassjansson 9 ай бұрын

Thanks, looking forward to it! :)

@JonValtandtheEvilRobots 9 ай бұрын

YESSSS DUDE this is EXACTLY what I was searching for!!!

@bassjansson 9 ай бұрын

You're welcome! :D

@avivamay 9 ай бұрын

omg i love this rendition! you guys are so cute & cool!!! the drip, the dances, the vocal performance-viagra boys would be proud! 💖✨🌸 so glad i found this! ☺

@bassjansson 9 ай бұрын

Thank you! Such an amazing comment! 🤗

@avivamay 9 ай бұрын

@@bassjansson 🥰

@shuntup 9 ай бұрын

Man that absolutely dope!

@bassjansson 9 ай бұрын

Thank you! :)

@jazzhab1 9 ай бұрын

Great job…miss the saxophone

@bassjansson 9 ай бұрын

Thanks, and I must agree!

@josemanuelgonzalez6968 9 ай бұрын

Nice tutorial!!! Thanks for sharing. I guess that you need some decoder in between the arduino device and your RGB LED strips, right?

@bassjansson 9 ай бұрын

Hi Jose, if you are building it like in my video, then yes, you will need a DMX to LED-strip decoder. But, if you are capable of some Arduino programming and hardware design, you can also use the MIDI library together with a LED-strip library like FastLED, hook up the LED-strip DIN and GND to the microcontroller and there you go, no DMX needed. Remember to use a proper power supply for the LED-strips though! Hope this helps :)

@leonarda1973 9 ай бұрын

@@bassjansson Thanks a lot for the quick answer!!! Which decoder would you recommend? I want to control 4 LED RGB bars I made myself.

@bassjansson 9 ай бұрын

@@leonarda1973 I cannot recommend any, as I haven't used any of those yet. Although, a subscriber contacted me and was using a 24 channel decoder found on Amazon and that one worked completely fine for him!

@leonarda1973 9 ай бұрын

@@bassjansson Thank you so much again!!!

@maps9 10 ай бұрын

Земфире больше не наливать..

@365pogo 10 ай бұрын

кайф! споооотс!

@silverfox9285 10 ай бұрын

Nıce!!

@keytun69 10 ай бұрын

This is amazing! if you were to daisy chain multiple fixtures, could you individually send them different messages?

@bassjansson 10 ай бұрын

Thanks! Yes you can, but you will need to update the code to match your lighting setup! This is done in the initDmxChannels() and updateDmxChannels() functions. Check these functions and the comments I put in there. If you have any more questions, you can send me an email. Hope this helps!

@Jonny_boy00 10 ай бұрын

"we have viagra boys at home"

@Lleimzjames 10 ай бұрын

Excelent

@wojtekdeutschmann7251 10 ай бұрын

Hi, i already buind this intarface, i installed libraries, uploaded your Arduino Ide scrypt and interface look fine - light flashing and ableton live see Arduino Leonardo midi out. But unfortunetly my device (24chanell dmx512 decoder - was checked and work with build in program) dont get any dmx signal from live via usb-dmx interface. It is possible that something is wrong with interface? I use it on ableton live 8 on PC.

@bassjansson 10 ай бұрын

Hello, have you tried my test scripts? Did you update the initDmxChannels() function to match the channels of your light? Have you soldered the A/B connections to the correct pins? Check my GitHub for the correct schematic. Did you use the direct or mapped version? Please try the direct one first, and make sure you modify it to match your light. You can send me an email if you'd like more help!