Sometimes you do find nice things, so i keep trying, i am just not buying at BangUgood anymore. If a product is Bad and its easy to get a refund. i am willing to try. BangUgood has proved itself over de last years to have very Bad customer service i do NOT recomment. Most Ali Express stores do have good service.

Thank you! , Yes somehow, the Fluke you find a lot second hand, the Brymen they just keep and never sell. i must say the Brymen feels great when you hold it. the 869s is great with all the digits, but it is a bit big, the accuracy is amazing though.

@@TonyAlbus portability is also a factor when one has to carry or travel with those things. Was looking into portable DMMs and chose a small pen style Kyoritsu. Way less digits and guess not that accurate but good enough for what I need it for. Also weird thing I noticed that the tiniest and cheapest pocket Fluke is not for sale officially in EU. I can only speculate why not, but availability here is also reason why I went for the Kyoritsu.

Thank you! This brand would not come to mind to me. but somehow it ended-up on my desk, and i like it a lot!

Thank you! , yes a smiling man here

Hi, i am not very familair with the 123b , try to send a n email the fluke support.

@TonyAlbus yea I did 4 days ago no reply yet and didn't answer the phone for multiple calls. It's brand new. My work is going to send all 10 of them they purchased back for another brand

@@TheMoody876 Sorry to hear that, yes that is very poor service, we should expect a lot better from Fluke

I f i understand well, you can just connect any source from 5-21 volt.. matbe you need to change the connector, but thats about it.

​@@TonyAlbus A 6S lipo is 25.2V at full charge, so it wouldn't be able to run from a typical drone battery without a buck regulator.

@@rocketman221projects Thank you for sharing, that is a very good point!

Yes the Wellers Rock.. mine still after 30/35 years..

@@TonyAlbus Mine also actually from around 1984 I also have a Fluke 73 and a 77 both similar ages.

Great! yes some stuff just keeps working for ever.. amazing build quality

Hi, i got mine from Conrad in Germany or NL.. this is something simular: DeskLampMagnifier go.tonyalbus.com/DeskLampMagnifier i use 8x

Hi, in the description i usualy have the links for these items, i beleve it was the LB02A or the DmmCheckPlus.

Yes indeed, the official store sells 1.5+ , not sure if you buy it from Ali if they sell the older versions

Ja zelfde... hij was 1200, zit nu op 1700 ,,, maar de sample snelheid en de uA en de bijna scope die erin zit... tja het is het wel. Als ik hem leen, ben ik bang dat ik hem wil houden... :)

Yes, its always moving... the Tech and the RV ..!

Beste Marcel, eerst moest ik even heel hard lachen.. Ja dat is een veel gehoorde 'klacht' Mijn kanaal heeft geen abbonement maar het kost vele kijkers toch geld mijn filmpjes te kijken.. Sorry :) Leuk dat je ook een berichtje achter laat, ik vindt het altijd leuk te horen of een filmpje behulpzaam was of niet. dus jij ook bedankt! Ja ik dacht een jumper op de bcp en misschien in het menu nog iets. maar dat was verder niet ingewikkeld. Leuk, ik ben erg benieuwd naar het resultaat van de 1200Watt

Yeah!! congrats... i hope so too!! that was a great deal.

Thanks, yes very happy with it.

Thanks, the Keithley DMM6500 was still on my list, when introduced price was around 1200 now it is around 1600+ .. i need to let it pass.. there are more and more other good product and brands too now. i am also a happy Siglent user SDS SSA SDG they could do better at PSU and Electronic load, but thats maybe just not their thing. Good stuff for reasonable price

@@TonyAlbus The DMM6500 is really a different beast than all the Teledyne/Keysight inspired meters. It is fast as you already know, and especially when you are busy with resistances it is a joy that within a fingersnap the range switches from any range to any range. Because of the fast update rate it allows you to see weird behavior better, and if you don't like that, you can do actually something I haven't seen before in other meters which is taking a moving average. In Keysight derived meters you can only put statistics on screen, but these only reset when you deliberately clear the buffer. With the DMM6500 you can just take the average of the past 50 values or whatever you want. Also it can do continuity testing with any limits, but also in reverse (so beep above limit instead of the other way around). Also, the beep will have a minimum length, which is another smart feature. Once you have worked with the joy of such an update rate, you never want to go back, and I think even at 1600+ it is a good deal for what you get. The only gripes with the DMM6500 are for me the max ohm range is 100 MEG, and the current inputs have crazy high resistance (I think 12k for the lowest current range).

The C has more counts and more options.

Hi, i dont remember, it was a borrow, i would think just a few hours, if it was crazy long i would have remembered

@@TonyAlbus Thank you Tony I have the same problem it takes a long time to charge. Not using it anymore?

@@stankostankovic9008 It was not mine, it needed to go back to owner. but i liked it the short time i used it to be honest

Hi Steve, not all GPSDO use the Ublox , but most GPS receivers have serial output to send NMEA out. It is not always RS232, can be also RS422, Tsip or just TTL, for most are converters available, but first you need to find out what receiver you are dealing with and then start looking for internet information from there. I did this on video also for the Rapco GPSdo, that was also unknown for me. i filmed my process. kzfaq.info/get/bejne/Y8iAYK6Ty7WYh5c.html

@@TonyAlbus It turned out to be an ordinary Ublox Neo 7M and I was able to connect to Tx and Rx with a USB adapter. However at 19:00 into the video you lost me while using GNSS Config to add other satellites. On my screen everything there is blank so I checked the same boxes that you had but I still only get US GPS satellites. Do you have to be in Europe or somewhere to get the others like you have?

@@stevec5000 The video has been a while ago, i read in the video description that people were able to do this with the 7M, but only 1 mode at the time. and for Gallileo you need to set the version to 4.10. so with 7M you need to chose if you want Gps OR Gallileo, you can not have both.

Thank you!

Thank you! yes cool old time :) i think i used the homemade RF-tab, RF sampler: kzfaq.info/get/bejne/hLR7qph1sdq3nIk.html

Thank you, i wish you a good life.

@@TonyAlbus 한글로부탁드립니다

That is great! thanks for sharing

Hi, i like the Marconi a lot but have no experiance with the HP

Sure is David, great surprise, and thank you for the code. it seems to be all the same, 12345678 for webinterface for telnet and for calibration. Thanks!

Hi, can you tell what is calibration testing device you use and where to get it?

@@Stu66orn Hi Steven, yes in the video description i usualy have a lot of items links. is LB02A or DMMcheclPlus

You will be fine, the latest firmware known to me is from 2022, i may hope at least that version will be in your 2024 buy. Its a very nice radio for sure.

Yes that are indeed great tests to do, i did something simular here: kzfaq.info/get/bejne/aNCFlKqgls-8m2w.html

Thanks! yes it sure is, its in the wall now and its now silent, so even better than i thought.

Yes agree, i am not saying the Siglent is bad, it is actualy very good and spot on, its just that in my lab, attic, the temprature just goes crazy at some point. Somehow the GWinstek and Agilent 34401A just hanlde that better. but i am sure if i could keep my temprature around 23c like in springtime... the siglent is spot on without drift.

Thanks, yes love it!

Bedankt!! ja goed idee... of een Fiat en dan een Ferari krijgen.. haha

Yes it is a pity Siglent did not put more effort in those details. many Siglent fans go to another brand to get a load.

Yes both are very good. my problem is that i can not get the temprature stable in my attic and it gets hotter and hotter.

Thanks Grer!

Sometime you just get lucky on your local ebay, Yeah! . very true no Banggood for me anymore, not even for free reviews, too disapointed to many times.

Yes i am also happy with my Siglent and 2.200.00 counts, my problem is the heat in my lab(attic) if it was stable it work better, becouse mine was also spot-on when not to hot. It did have a calibration option, but locked with password i do not know... but i have it just a few hours now.

Thank you!

Thank you!

LOL, yes :)

Have a look on Google about putting NTC's in series of the power cord to reduce the inrush, its a cheap trick that works.

Thanks for leaving a comment!

Hi John, it looks reasonable inside, you get a lot for this price. would i trust it to run 40A a long time, a simple NO. But when do you need that, and if you need it you prob want something bigger like the KEL2040, that i trust to run 40A a long time... you simply get what you pay for. and for this price it is very nice.

@@TonyAlbus Guess I'll have to pick one up, find sometimes to charge at 40a, and keep the thermal camera on it out of sheer curiosity. For the money it's definitely hard to beat for a starting unit and for general testing!

Thanks, about the trojan, i am using latest version of ESET and it scans clean. it could be a false positive, but always be careful what you download form the internet.

@@TonyAlbus Well, I don't have a modern Windows machine available, so I'm using an old Win7 thing that I found in the lab. Might be true that it's a false positive if you have a better scanner test it!

@@JensChrBrynildsen Thank you, i take these type of messages very serious, as i also just received it from the supplier from china, there could be something wrong with it, and i have just downloaded it from the link in the video and rescanned it. it still thinks its clean.

Hi Steve, i do not know, i just read the first and then write the second, if it works i am happy if it does not. i blame the device.. sometimes its random, sometimes is becouse of encryption.m i notices its not good at decoding encryption. but non-encrypted card usualy goes well

Yes sometimes you find the solution that works for you in two devices and not only one exspensive one. its works different for everyone. in the end you need to find out what works best your you... after a while you know what you are regularly using and what not.