Thompson Melissa Moore Amy Williams Mark

Been using Zaino since 2001. Still using it in 2024. It never disappoints. And when done properly, lasts 6 months easily.

Still waiting for phase 3!!! 🔥

What kind of exhaust is on this c6

Thank you from Naples Saturday will be a lot easier thank you for breathing life into MAXIMUS

I need the thermostat!

Excellent!

I dont care for it as it isnt glossy as most calipers are when new!

2024 Phase 3 never came jk great video!

Still waiting on phase 3

I have an LS2 t56 from a gto in my 87 Iroc Camaro. Fast LSX intake Speed engineering long tubes Hooker blackheart exhaust BTR stage 2 cam 468rwhp on a mustang dyno.

Do you buy the tuner and just choose what upgrades you have? I only have CAI and headers on the ls2 A6… I want to tune for that and I also want to tune for better shifting is this all possible and can you send the link of which one you got please and thanks ❗️ nice video 💪🏾

Thank you very much for showing me this. I just bought my C5 today and the doors took a miracle to open until I watch this video and now they work perfectly 👍

How much for a 19×10&1/2

why did you change to 160 thermostat? Why not permatex on the gasket? (maybe showing my age)

All you needed was basically a brass polish and fiber. Metal wheel way too abrasive for copper

Good looking Vette, and You're house is awesome too sir!!! 😎

My father just got a stage 2 cam high stall converter long tube headers x pipes veraram intake and make 429 whp

Whered you get that silver carbon looking part that goes around the switch? What's that called?

Mods?

My bone stock auto c6 ls3 did 0-60 in 3.8 seconds and I had no wheel spin on fresh tires that were two days old

Is there a difference I just tuned mine

3 things. 1. Audio mixing blasted me with that LOUD ass music. 2. Nice production quality for such a small channel so far. 3. Make sure you set your camera to a 1/60th shutter for 60fps. The 180-deg rule is crap and doing it the way I described will make the footage look more natural with better motion blur. However, if you want the most versatile setup, I actually suggest 50fps with a 1/60th shutter. It edits easier and uploads to youtube better, plus you can drop half of the frames for "cinematic" footage, or you can slow it down 2x instead and have smooth-looking slow motion without having to change your camera settings to shoot specifically a slow-motion shot. On top of that 50fps 1/60th is compatible in all countries without artificial lights flickering due to different power line frequencies. The icing on the cake is that it takes up less space on your hard drives, too. Unless, of course, your camera uses the same bitrate for 50 and 60, in which case you'll have better image quality with 50. Last thing is a pro tip: Set your camera to LOCK the shutter speed so auto-exposure can't change it. Shutter speed is important for motion blur which is important for how natural and realistic your footage looks. Human eyes see 40-60 fps in a casual setting and don't have shutters at all. This means 1/40th to 1/60th of a second shutter speed regardless of frame rate will be the natural motion blur range. Until you go higher, in which case always match frame rate and shutter speed or get really close for compatibility purposes. You can fudge it a little (especially going lower to 1/30th) but much past 1/100th and it degrades quickly. Not worth it anyway since the next "compatible with power frequency" shutter speeds after 1/50 and 1/60 are 1/100 and 1/120, the latter of which doesn't exist on most consumer cameras, and is instead replaced with NON-compatible 1/125.

Can I use wd40 to clean it?

where the fack is the phase 3 video???? thanks for the video lol

hmmm wheres the phase 3 video???

you the real mvp!!! going to add carpet and led lights to mine as well!!

Does the dyno guy not know that you put it in sport mode and manual shift it????

I have been looking at this Diablo unit, however I cannot understand why Diasblo cannot give close approximations on a stock C5. This seems like BS hype to get us to buy it? Example if there is a max HP tune, then list the increase. Even reading the comments there seems to be very little actual info as to hwat the increase was or should be?

range 226 on a full tank! savage. Mine usually says 310-320 but only get about 280 because i romp on it all thetime

On the screen showed 22ft lbs then you said 20ft lbs so which one is correct?

Thanks. This worked to fix the passenger door on my 2006 corvette.

Why did it jump like that from 60-70 and hiccup back down? It almost sounded like you swerved for a moment . I had a turbo car that would burst up like that. Just curious. I'm still a car noob

Whats a front foshia?

List mods?

How safe are these cars?

6 miles from that ?! Damn

Excellent video. Not to nit pick but a. little repetitive with wording but still a great video. Thanks.

The tires might have hit 60 in 3.9 due to spinning entering second gear, but the car didn't. A Dragy would show 4.5 on this run. Still plenty fast for an auto C6.

That was 5.5 sec

Looks awesome did you have to make any cuts to fit the kit on or was it an easy bolt on thing? I see you mention you still have the components for the zlr doors. If you still do have much are you selling them for?

69 likes. Nice

Why don't you have it in competitive driving mode?

really in depth and professional video 👍

Great video!! Thanks so much!!

100XThanks ! Just fixed. 08 Vette in 15 minutes..

It looks great but to me there’s not enough open room but all in all…I love it

So, this video was very informative on basic process for removal and replacement. Just to add to it I found that removing the throttle body gave you tons more room to work in this area. Four screws and a couple of connectors and it's out of the way. A must do if replacing the water pump.

Any updates on phase 3?!?