Interesting question. I don't really know a lot about sound, but I have spent some time trying to sound proof a portion of my garage; I discovered that it is not a trivial problem to solve. I learned that sound waves do not like to travel through materials that have a lot of mass. MDF certainly has a lot more mass than corrugated cardboard; in other words, it is a lot harder to get sound waves through MDF than it is corrugated cardboard. I think the statement, "cardboard cannot sustain bass" is probably very true. Why are you asking? Are you building speaker cabinets and considering making them from cardboard? Thanks for your question and for watching.

You're welcome. Thanks for your comment and for watching.

Thanks for your comment and for watching. I still use the same zero clearance insert that I showed in the video.

@@ImaginethenMake I made it! it's working good so far. Thanks...

You're welcome. Happy scrolling!

Thanks for your comment and for watching. I tend to leave my mistakes in my videos hoping that others won't make the same one.

@@ImaginethenMake Said the excellent teacher. Still haven't had time but granddaughter is coming to visit soon and I'll share with her. Thanks again for keeping it real! Blessings, p

Thanks for your response. Enjoy your time with your granddaughter.

Thanks for your comment and for watching David. I tried hard to make the LibreCAD videos as easy to follow and learn from as I could. I'm glad to hear your liked them. Enjoy using LibreCAD and making your drawings. If you have any questions, just leave another comment on any of my LibreCAD videos. I check for new comments every few days and I reply to 99.999% of them. Yes, Blender is an amazing program with which someone can do a lot with. I have only scratched the surface in my Blender videos.

You're welcome. Good luck with the lemonade stand! Thanks for your comment and for watching.

Agreed. As I found out the hard way, I did not realize that there are metal wires in the bead. For those that want to know more, watch this kzfaq.info/get/bejne/hs5_hKlyt9-bk2Q.htmlsi=uKQBV2dBPMIFV6Lv , Thanks for your comment and for watching.

Thanks for your question. Take another look at my video. Within the 1st minute, I show you who I bought my blade adaptors from. Here's a link to their website: www.pozsgaidesigns.com/page0006.htm . The Amazon link shows blade adaptors very similar to the one I bought. Some people prefer purchasing from Amazon because it is easy to do a return if you are not satisfied (FYI: you can do a free return to Amazon at your local Staples store.) Maybe I got lucky, but I have been very happy with the blade holders I bought. I originally bought them so I could try out using some spiral blades (which are pinless blades). Since installing them, I mostly use pinless blades now because there is a HUGE selection available. However, I still sometimes want to use a wide flat pinned blade so it is really nice to go back and forth between blade types; the switch over time is a couple minutes at most. I think it is worth noting that installing a flat blade is significantly different than installing a pinned blade. The pins in the pinned blade rest in the holder the same way every time. Since the flat blade doesn't have any pins it can be positioned in slightly different spots. A little practice and you'll come to know what I mean. Here's another video that demonstrates what I mean: kzfaq.info/get/bejne/ps6ch7B_29y5iIU.htmlsi=nCt2f81agTfBbS1F . Thanks again for your question and for watching.

@@ImaginethenMake K, thanks for your help. I went to the Amazon link you provided in your notes above. I'll check out this link you provided. Do you have the Central Machinery model 62519? That's what I have. Again, thanks for your help.

My saw is ITEM 93012. If you click the Amazon link in the video description and scroll down until you find the Product Description section in Amazon, it says "This kit converts most 16" scroll saws to accept both plain end and pin end blades! Easy to Install. Designed for use on these 16" scroll saws: Sears Models 23611 & 23612; Ryobi Model SC 160; Dremel Models 1671 & 1695; Skill Model 3330-3335; Central Machinert Models S 5909, 62519, 93012; Northern Hydraulics Model SS16; AMT Models 4601 & 4602; Reliant Models DD66 & DD67; HAFCO B-18V; Einhell TH-405E; Proxxon Micromot DSH-2; Record SS-16V; Shop Fox W1713-16; Scheppach Models SD1600, 240VS; Deco 405, 88002123; Rikon Model 10-600VS; Grizzly Go563 VS-16”; Wen 3920-3921. Contains all hardware and tools for installation." Notice that both of our saws are listed.

Thanks for your comment and for watching.

Thanks. I appreciate it.

Thanks for your comment and for watching. I think I understand what you mean; the chip board you saw me use was from a box used for food from the recycle bin - FREE. If you had the need and you wanted to spend the money, you can purchase much larger sheets (although in bulk) from here: www.uline.com/BL_1852/Chipboard-Pads?keywords=chipboard . I'm sure there are other places as well. (At my day job, the company buys a lot of this material to be used for packing, masking when painting, or protecting sensitive surfaces.) If you needed to cover a larger area with free chipboard, I would try tiling many smaller pieces. In the end, you might see the seams between the tiles so then perhaps you could use those visible seams to create some kind of interesting repeating pattern on your surface. Hope this helps!

Use this link: amzn.to/3kdzdxT Thanks for your comment and for watching.

@@ImaginethenMake thanks 🙏

Thanks for your comment and for watching. This was a fun video to do although using a flat blade for puzzle pieces is the way to go IMO. And using a flat blade requires practice!

As I discovered later on in other attempts to remove car tires from rims, the steel wires buried in the tire's bead make it very difficult to remove the bead using simple tools. I don't think a heat gun would help but thanks for the suggestion. Use this link to watch how I cut off a tire bead: kzfaq.info/get/bejne/gbmBmteWksuUhGQ.htmlsi=wvkftH2KO4QC6LyF . Here are a few other attempts at removing car tires from rims: kzfaq.info/get/bejne/qduJmc6Tu6evd2Q.html , kzfaq.info/get/bejne/gZ6lfMamtq6zqX0.html , kzfaq.info/get/bejne/hs5_hKlyt9-bk2Q.html . Thanks for your comment and for watching.

You're welcome. I'm glad the video was helpful to you. I think the loudness of a power tool has to do with the kind of electric motor that the tool uses. The Universal motor with brushes is most likely the least expensive to manufacture but I find them to be pretty noisy. When I go to buy the next power tool, I'll likely look for one that uses a brushless motor; they should last longer and be somewhat quieter. Thanks for your comment and for watching.

Thanks for the tip! I'll take another look at my knife. Thanks for your comment and for watching.

Thanks for your comment and for watching.

Good question. I didn't wear test the pieces you see in this video. However, I can tell you that my wife still uses, everyday, the tablet stand that I made for her ( kzfaq.info/get/bejne/i7KAZpiU3tbReGg.htmlsi=-R8TK2J-GnTsVmdD ). Everyday, I still use the box I made for inside my dresser drawer ( kzfaq.info/get/bejne/jZ5xYK6n2dmzgKc.htmlsi=qXTbWeVAhSZ4BcyU ). Both of these projects were used to test some of my ideas about building with corrugated cardboard and chip board. I would say each project has been successful and has stood the test of time DESPITE not having any protective finish applied. I am encouraged to make more projects and when I do, I will probably make more videos so stay tuned! Thanks for your question and for watching.

I have not tried shellac probably because of the smell while working with it. When it gets warmer outside, I'll try some then. I bet it will work out great. Thanks for your comment and for watching.

It sounds like the video was helpful so that's great. Thanks for your comment and for watching.

Ha-ha. I hope everyone can see in the video that adding the concrete blocks to the Workmate made it much more stable. Thanks for your comment and for watching.

Just buy a small angle grinder!

Why?

You're welcome. Do you scroll? Thanks for your comment and for watching.

@@ImaginethenMake I had a scroll saw in the 90s. It was much different than the scroll saws t on day! I haven’t scrolled in 20+ years. I recently purchased a Seyco and am just getting started with it… trying to learn all over again.

I think the Seyco is an excellent machine from what I have seen of it online. I still use the $100 Harbor Freight saw (although I did replace the blade clamps). I think if I tried a more high machine, I would probably upgrade. Enjoy your re-learning. I think the scroll saw is a tremendously versatile and hugely underestimated machine. Thanks for your comment and for watching.

Yes, others have said that as well. That feels awkward to me so I prefer adding the concrete blocks to make the Workmate more stable. Thanks for your comment and for watching.

You're welcome. I'm glad it was useful. Here's a link to my LibreCAD playlist in case you are interested: kzfaq.info/sun/PLGCBwUeR2BD2ypYi5k0c4p6M52YO8Z-WD&si=VPJvl3obu_dZVqqD . Thanks for your comment and for watching.

Thanks for your comment and for watching.

I hear what you are saying. Different skills are needed for each machine. I've never broken a jigsaw blade, but I have broken a few scroll saw blades. Thanks for your comment and for watching.

Sorry you feel that way. I can tell you I have used this as a crude workbench. A crude bench is better than no bench. Thanks for your comment just the same and for watching.

LOL. These rims were trash when I picked them up so I wanted to take the tires off (using the very crude tools on hand) and sell the rims at the scrapyard. Thanks for your comment and for watching.

Agreed. Once the bead is broken, the rest is "easy". Thanks for your comment and for watching.

The challenge I gave myself was to figure out a way to safely cut these parts using a circular saw, not a table saw or bandsaw. (For woodworkers on a budget and short on workshop space, a circular saw is much cheaper and easier to store than a table saw or band saw.) Having said that, I am working on a simpler way to cut these parts using a circular saw - stay tuned. Thanks for your comment and for watching.

Thanks and I just did. Thanks for your comment and for watching.

Did you make one? Thanks for your comment and for watching.

Agreed, sticking a piece of plywood plus some heavy weights onto of the cardboard while the glue dried would probably increase the bond strength. Even so, I was surprised at how strong the cardboard sandwich was. I think the perpendicular approach helped to make it strong. I'll have to try this experiment again using long pieces of cardboard with the corrugations all running in the same direction. Thanks for your comment and for watching.

That's a great idea! I'll have to try that. Thanks. Thanks for your comment and for watching.

LOL. It was more about trying to cut it off myself to see if I could. Thanks for your comment and for watching.

Agreed. Cutting the 2x4s would probably be easier using a bandsaw (instead of a circular saw). The best way to make the cuts would probably be by using a table saw. If you watch my videos, you might remember that I got rid of my table saws a while ago in favor of using a circular saw. That's what brought me to try and make these cuts using a circular saw. Thanks for your comment and for watching.

Thanks for your comment and for watching. Cardboard is typically free and pretty fun to work with. I do have a playlist of other videos using cardboard. If you'd like to check that out, here it is: kzfaq.info/sun/PLGCBwUeR2BD0SvqEJhwwjOR53E8DV6FVD&si=exdXdCPiYfAxSyFH .

Thank-you for your comment and for watching.

Thank-you for your comment and for watching.

Great! I'm glad you liked it! What other kinds of scroll saw videos would help you? Thanks for your comment and for watching.

Maybe next time (if there is a next time) I'll try using the bottle jacks. Thanks for your comment and for watching.

I'm glad you didn't get hurt by that flying piece of wood! I too have had pieces of wood fly towards me from a table saw which was my primary inspiration for getting rid of it. The Bladerunner is definitely fun to use (although it is loud IMO). I have a playlist of Bladerunner videos here: kzfaq.info/sun/PLGCBwUeR2BD2SPSsV51qPBkK8p1grR-UL&si=cf8bT5bUpZWCbiyG . If I want to make lots of cuts quickly, I try using a circular saw (I think it is safer). I use a battery powered model when possible or a corded model if I lots of cuts to make. Here's a playlist about using the circular saw: kzfaq.info/sun/PLGCBwUeR2BD3Cpl2LJax9kvll9B-SDlau&si=eS5EEdRfFkL14ZQ6 . If I only have a few small cuts to make, I tend to use a hand saw; I prefer a Japanese style pull saw. Thanks for your comment and for watching.

Thanks for your comment and for watching.

The background music for this video is a light jazz piece; simple and upbeat. I chose it because I thought the majority of my viewers would be ok with it. Next time, try turning on "closed captions" (the button with the cc) and muting the sound (click the speaker icon). The words I am speaking will show up as text on the screen and since the sound is muted, you won't hear the music. Thanks for your comment and for watching.

Yes, cutting the side walls off is pretty easy and quick. Thanks for your comment and for watching.

That's great! Did you also cut the bead off? Thanks for your comment and for watching.

Yes, I can relate to your story. I think the multitool you are referring to I also used in another video at the 5:15 mark; here's the link: kzfaq.info/get/bejne/hs5_hKlyt9-bk2Q.htmlsi=0VvdFvWnH7LnhEKC . I'm guessing you have never seen a tire machine taking tires off and putting new ones on rims. You can see these machines in action at retail tire stores. These machines are very powerful. Replicating this kind of power using simple tools from home is definitely a challenge! I don't know for certain so I am guessing that once auto tires went tubeless, the steel wires were added (embedded) to the tire to produce an air tight seal between the tire and rim. In the end, using the reciprocating saw with a new, sharp blade on rims I intended to scrap is the fastest way to remove the tires and beads. For rims I don't want to damage, I pay the tire store to take old tires off and put new tires on. Thanks for your comment and for watching.

@@ImaginethenMake And thanks for the video. The only tires I've encountered so far with this steel cable are old ones. I have a couple more old snow tires on rims to remove of the same type. I hope to get the time to remove (without damaging rims) down from 4 hours to 1 hour. To me,1 hour of struggle is worth saving $20, especially if you learn something in the struggle.

I wish you luck. Thanks for your comments and for watching.

Ha-Ha. It wasn't so much about the money as it was the challenge of getting the tire off of the rim with simple tools. Thanks for your comment and for watching.

Thank-you. I think it is my most popular video. Thanks for your comment and for watching.

You're welcome. It was fun creating this joint and I'm glad others have found it useful. Thanks for your comment and for watching.