Mofutora Modeling : Anime Figure Modeling Painting

Пікірлер

@alexsandermc9794 3 сағат бұрын

Thank you mate, nice job!

@kamoku753 7 күн бұрын

お初にコメします、よろしくです。動画面白く見させていただきました。私も同じアルテマ５e使っています、３Dプリンターを持ってると便利ですね３Dプリンター持ってないのでメーカーの物をいくつか買い足して使ってますメーカー品って悪くないのですが小回りが利かないと言うかちょっと物足りないんですよねｗ買ったものに手を加えて自分好みにはしているのですがお金が掛かりますしね私もそろそろ今度３Ｄプリンター購入考えて見ようかと思っていますそれといきなりこう言うことを申すのは大変失礼かと思いますが１つ提案がございますアルテマ５のビットで出てほしいとずっと思っているのがあるんですそれは塗料ビンないしそれに付随する溶剤ビンなどを使用前にふるふるする為のビットが無いかなと… 毎回ビンを振るのも大変なのでそう言ったものが有るとみんな便利じゃないかと考えています動画のネタに１つ試作してみてはいかがでしょうか？すいません長々と長文失礼しました。それでは頑張ってください応援してます。

@MofutoraModeling 3 күн бұрын

コメント・ご視聴ありがとうございます！悪くないけど物足りないというのは、よく分かります！好みのもの作るなら3Dプリンタ便利ですよ。一回データで作ってしまえばいくらでも印刷できますしw数年前まで何十万するイメージだったのですが、いつの間にかかなりお手頃になってるので。ネタまでいただいてありがとうございます！失礼なんてとんでもない、大変ありがたいです。塗料振りビット、アリかもしれないですね。ちょっと気になるのは重さでモーターにダメージが入っちゃわないかなってところですかね。私、塗料は元のビンから別のニードルボトルに入れ替えて使っているのですが、ビンの重さがない分いけるかも？何か作れそうだったら検討してみます

@rehis690 7 күн бұрын

Cool! I use my Artima 7 still, but mostly use the DSPIAE Illusive Shadow now since it's wireless, the bits are also cheaper, which is useful because the have a large skirt that I found difficult to measure inside, so I couldn't design 3D printed bits for it.

@MofutoraModeling 3 күн бұрын

Thanks for the comment! The DSPIAE seems quite nice. The cable is quite annoying some time.

@user-pp8nh9rz9u 7 күн бұрын

真似したいですね〜。でも、私の家には3Dプリンターが無いからまずはそこからですね。

@MofutoraModeling 7 күн бұрын

ありがとうございます！3Dプリンタ、楽しいですよ〜

@iosbios6772 8 күн бұрын

最後のアイデアすごい、これはぜひとも真似しなくてわ！！

@MofutoraModeling 8 күн бұрын

ありがとうございます！ぜひ使ってみてください

@A-Smithee 11 күн бұрын

ゲンガーのポーズ見て思いついたけど…。 T-800のフィギュア光造形して逆再生したら溶鉱炉シーン再現できそうですね。

@MofutoraModeling 10 күн бұрын

コメントありがとうございます I'll be back ですかね（すみません、見たことはないのですが。。。）確かに出来るかもですね。サポートが見えちゃうのをどう処理するかがポイントかもですね

@opakin192 12 күн бұрын

すんばらしいー

@MofutoraModeling 12 күн бұрын

光栄です！

@albertasvaidyla7415 12 күн бұрын

Good and honest video, keep it up 👍

@MofutoraModeling 12 күн бұрын

Thanks so much!! Will do

@tgoch 13 күн бұрын

いい！スゴくいい！！

@MofutoraModeling 12 күн бұрын

ありがとうございます！！

@user-el5lo4ec8w 17 күн бұрын

ネロブースのぱくりだ

@MofutoraModeling 16 күн бұрын

コメントありがとうございます！はい、おっしゃる通り

@pierluigimarchi8108 21 күн бұрын

Best video on cutting....saved me from giving up a complex.printing!!thank u

@MofutoraModeling 21 күн бұрын

Thank you for the comment! I’m glad it helped

@polar_baron 22 күн бұрын

I worked for 2.5 years as an electronics engineer, I quit at the beginning of this year. Now I spend all this time searching for myself and jumping from place to place, trying different things. You showed me that anything is possible. My dream was to create things that we come up with in our heads, telling stories to other people and showing our characters. Your video suddenly appeared in my recommendations, and I am at the same time happy for you and at the same time I am frustrated that I am wasting time when I could have started something like this a long time ago. Good luck to you, I hope you have fun and make good money doing what you love. I have subscribed and will follow your journey.

@MofutoraModeling 22 күн бұрын

Thank you for the kind words! It's great to hear from another (ex)engineer. It's so difficult to find what really fits. I myself tried blogging (on a completely different topic from this channel) for 2years. It's still online but I shifted my focus to this hobby/channel for the past year or so. Sometimes things don't work out but there are things I did not realize until just trying things out, and it has definitely been useful in my next project. So what I want to say is, I'm sure your not wasting your time. I envy your motivation to try different things. Thank you for the encouragement! I'm sure you will find something that matches you perfectly

@ttc1707 22 күн бұрын

声が右からあまり聞こえないのでiPhoneで横にすると説明が全然聞こえない。

@MofutoraModeling 22 күн бұрын

コメントありがとうございます！私のiPhoneでは再現しなかったのですが、PCで試したら同じ感じで右が聞こえませんでした。原因探ってみます、ご指摘ありがとうございます。

@assemblage507 23 күн бұрын

おすすめに上がっていたのを拝見しました。自作塗装ブースで僕も同様な処理をして使っております。同じ発想の方を見つけると「ひとりじゃないんだ」感があってアガります（笑）僕は箱内の上下左右と仕切り板に幅広のアルミテープを貼ってその上にポリプロピレンをネオジウムで固定して汚れ対策にしています。天板裏のテープLEDも手持ちの安価なものを4列に並べて貼っています。アルミテープの反射も手伝って、わりと光量は取れています。電源タップは6口の個別スイッチで、照明、換気扇、コンプレッサー、アルティマ５、プロクソン等に割り振って使っています。エアブラシホルダーも３本分をマウントするものを３Dプリンターで出して取り付けたのですが、３Dソフトの扱いが未熟で、がサイズが大きくなって少々邪魔なのが悩みのタネなのですが、もふとらさんのアイディアも試してみたく存じます。よろしかったら３Dのデータを利用させていただけたらと思います。他にもおすすめのアイディアがあればご教示いただけると幸いです。

@MofutoraModeling 22 күн бұрын

コメントありがとうございます！仲間がいたんですね！確かにアガりますwアルミテープの反射使って光量とるのは妙案ですね実は私もブースの上に個別スイッチの電源タップ使ってON/OFFしてます。３Dデータの件ですが、今どのように配布できるか色々検討してます。今しばらくかかるかもしれませんが、いずれ配布しようと思いますので、その時に試していただければ嬉しいです他もアルティマのカスタムビットとか作ってます。多分次の動画で紹介するので、また寄ってください！

@assemblage507 21 күн бұрын

@@MofutoraModeling 楽しみにお待ちします(*^^*)

@akinaichu 27 күн бұрын

これは伸びるべき

@MofutoraModeling 25 күн бұрын

ありがとうございます！お役にたったなら嬉しいです！

@T0MlNG0 28 күн бұрын

thank you for sharing your journey, I just started looking into blender from zero and hope that in the next year i will make as much progress in sculpting as possible

@MofutoraModeling 25 күн бұрын

Thanks for the comment! Awesome! I'm sure you will get much better than me

@Burtram 28 күн бұрын

Magnet tool holder is a great idea. I too went with plastic in my spray booth, it makes cleaning so easy.

@MofutoraModeling 25 күн бұрын

Thanks! I'm glad you also like the magnetic holder! Everyone likes magnets, right? But the plastic sheet was the easiest and best thing.

@felixxcatus 29 күн бұрын

looks great, 草

@MofutoraModeling 25 күн бұрын

Thank you so much!

@Maranatha2216 Ай бұрын

have you ever attempted a complex model that needs seperate part, I sculpted some cool warhhammer figures and a world of warcraft orc but I am not sure howto print this, it has so many intersecting parts and cavities

@MofutoraModeling 25 күн бұрын

Hi! thanks for the comment! Yes I have tried splitting my models. This is one of my other videos covering the topic. hope it helps! kzfaq.info/get/bejne/d9eIZK6YvriviWg.html

@Maranatha2216 25 күн бұрын

@@MofutoraModeling ohhhhh good to know

@jinxatron Ай бұрын

Very nice tutorial, As the others said, using displace is better than solidify, However I love the Idea you have here and it looks like it will be an easier fit and blend once printed.

@MofutoraModeling 25 күн бұрын

Thank you for the comment! Ya, I have taken you and other's advice and started using displace instead. works much better. (minor issue is it works as a factor(?) rather than a exact mm dimension... don't know how to get around that)

@christiancordes4443 Ай бұрын

Hi, thank you for your content, its very helpful!. I just got a Tourbox today and am still looking for the right presets for Blender. Are your presets available for download somewhere?

@MofutoraModeling Ай бұрын

Thanks for watching and the comment! Unfortunately I haven't figured out a good way to share the presets, so they are not available. I did first try the one available from the TourBox site, but the mapping did not match my workflow. The one on the TourBox site will have some shortcuts preregistered, so starting from there will be helpful. I think it would be best to take some time to list out which shortcuts you use, and how frequently you use each one, so that you can map the keys to how you use the shortcuts.

@cwtjones Ай бұрын

Thanks. Very inspiring. I am very new to Blender and primary want to just sculpt for 3D printing. Found this after seeing your video on how to part the model for 3d printing

@MofutoraModeling Ай бұрын

Thanks! So we are using Blender for the same purpose, hope the video helped.

@dano_gaming28 Ай бұрын

A gentle request, can you please make a video of what equipment and tools you used in making figure.

@MofutoraModeling Ай бұрын

Thank you for the video idea! It may take a while but I will try Do you mean the tools I use in Blender? or the tools I used after printing it out?

@dano_gaming28 Ай бұрын

Thanks @@MofutoraModeling, I mean what printer (what brand) you use and what type of resin you used in printing of figurines. Your figures looks so much quality and I been wondering how you print those figure. I will appreciate if you show how you setup your printer from start to finish printing of figure.

@dano_gaming28 Ай бұрын

@@MofutoraModeling I also watched your video of DIY Spray Booth. This is because I was planning to make my own diy anime figures and I don't know what tools to buy and what printer to buy.

@MofutoraModeling Ай бұрын

@danoFPV28, Thanks for the clarification! OK got it. I will be sharing some of the tools and how I do things. But just as a quick answer, I use the Elegoo Mars 3 Pro and water washable resin from Elegoo and AnyCubic. I also have a few pointers in this video about how I print. kzfaq.info/get/bejne/mbSiZKqV0NGul2w.html Hope this helps!

@dano_gaming28 Ай бұрын

@@MofutoraModeling, Thanks a lot for sharing you help me and others through your videos and tips. For now I've been practicing sculpting in blender😁 then if my skills get better soon I will buy those tools and resin printer.

@marcospeedy10 Ай бұрын

Você deveria ter ensinado em uma tela, mostrando as ferramentas laterais e falando no seu idioma, para que nós ativamos a legenda aqui.

@VFX Ай бұрын

this was a great watch! I love your progress already and hope you will keep it up!

@MofutoraModeling Ай бұрын

Thank you! will try my best

@jizu-oc3ec Ай бұрын

very inspirational and outstanding progress, thanks for posting!

@MofutoraModeling Ай бұрын

Thanks for the kind comment!

@cakku02 Ай бұрын

Great video! This style of cuts make fitting the 3d printed parts easier than usual plane cuts!

@MofutoraModeling Ай бұрын

Thanks so much! I think so too!

@jmvillasica0829 Ай бұрын

This activates my faith haha. Hope I can start as well soon.

@MofutoraModeling Ай бұрын

Thank you for the comment! That’s good to hear. I’m sure you can do it!

@erickmateolopezpalacios5281 Ай бұрын

Me too. Im a engineer, and im learning blender 😅

@MofutoraModeling Ай бұрын

Thanks for the comment. Cool! Maybe there are more of us

@cherrybomb7524 Ай бұрын

すごい！3D、プリント、ペインティングまで全部できるなんて本当にすごいです

@MofutoraModeling Ай бұрын

ありがとうございます！まだまだですが、頑張ります

@cherrybomb7524 Ай бұрын

あなたの驚くべき腕前に感心しましたところで質問があります 04:08 この部分でどんなものを噴射してペイントを消されたのか気になります

@MofutoraModeling Ай бұрын

コメントありがとうございます！（本Channelの初日本語コメントです笑）キッチンマジックリンです。アルカリ性の洗剤ですね

@cherrybomb7524 Ай бұрын

@@MofutoraModeling 初めての日本語コメントなんて光栄です！アクリル塗料を使用されていたのですね親切なお返事ありがとうございます！購読しました。これからも良い映像をたくさんお願いします！

@MofutoraModeling Ай бұрын

登録ありがとうございます！ぜひまた見にきてください！

@mr_fuji_mintsmr_fuji_mints9873 Ай бұрын

So cool!!

@MofutoraModeling Ай бұрын

Thanks for the comment!

@mestevep12 Ай бұрын

Very nice work !!!!

@MofutoraModeling Ай бұрын

Thank you so much!!

@Victimxofxprogress Ай бұрын

Steps missing here: Years and years of previous art experience

@MofutoraModeling Ай бұрын

Thank you for the comment! This is subjective, but most of my art experience was limited to art class from school, and I was quite a lousy drawer... 3D modeling might have been a good match for me because, I could just endlessly tweak the model until it looks right

@itssquishy3364 28 күн бұрын

But in the video they said that they have no artistic skill?

@MofutoraModeling 21 күн бұрын

Thank you for the comment! I guess yes. I have done some art

@milenafighter8120 2 ай бұрын

I still suck but keep improving with your guidelines! Thank You for the motivation and making the whole process less daunting ٩(｡˃ ᵕ ˂ )و

@MofutoraModeling 2 ай бұрын

Thank you for the comment! Your comments give me a lot of motivation as well! Good luck

@ChristopherTanujaya 2 ай бұрын

Thank you I'm feeling motivated to continue my figure creation project

@MofutoraModeling 2 ай бұрын

Thanks! I hope your project goes well!

@bismarckyjag 2 ай бұрын

Great job! I'm an engineer too, and looking to get into 3D printing figures as well, so this is very inspiring!

@MofutoraModeling 2 ай бұрын

Thank you! You're an engineer too? nice! Hope you do start

@uzakurt734 2 ай бұрын

why did you chose blender over zbrush? i would very happy if you answer im a mechanical engineer and i began to learn blender and i just bought saturn 2 and im confused about should i use blender or zbrush for modeling

@MofutoraModeling 2 ай бұрын

Thanks for the comment! I did briefly consider Zbrush as well but the main reason I chose Blender was because it was free and could do it all. I knew ZBrush has a free tier, but wanted to avoid limitations.

@Lochness-du9ct 2 ай бұрын

Truly inspiring, I got a resin printer out of curiosity few years back and I always wanted to do custom prints but lack the skills to do so. I’ve been slowly learning blender and seeing your progression is definitely a good motivator, maybe even I can do it if I keep at it

@MofutoraModeling 2 ай бұрын

Thank you for the comment! I'm sure you can do it too!

@Jim_One-wl4ke 3 ай бұрын

Awesome..

@MofutoraModeling 3 ай бұрын

thanks!!

@cyberpxl 3 ай бұрын

This is really, really inspiring! You've really improved so much. I'm looking forward to trying to start this journey myself.

@MofutoraModeling 3 ай бұрын

Thanks for the comment! Awesome, hope you have a good time with your journey!

@Last_Hawk 3 ай бұрын

you had an amazing journey! I've been selling various little things for cosplay on stocks for a year now. It's time to move on and try creating characters. thank you for the inspiration!

@MofutoraModeling 3 ай бұрын

Thank you so much for the comment! What you do sounds very interesting as well.

@robertomartin8731 3 ай бұрын

Where did you order online the MDF and cutting service?

@MofutoraModeling 3 ай бұрын

Thanks for the question. I’m in Japan so this might not help too much but I ordered it from Okamoku through Rakuten-ichiba.

@thantronghien9461 3 ай бұрын

Thanks for the video, cool process bro

@MofutoraModeling 3 ай бұрын

Thanks for the comment! I really appreciate it!

@Noburo333 3 ай бұрын

look really good ty for the tips

@MofutoraModeling 3 ай бұрын

Thank you! Hope some of the tips help

@MashuStar 3 ай бұрын

Wow, I thought you'd have a lot more subscribers with this video quality.

@MofutoraModeling 3 ай бұрын

Thank you for the kind comment! gives me a lot of confidence moving forward

@MashuStar 3 ай бұрын

@@MofutoraModeling you're welcome! Just want to spread positivity and upbuild people who have done work without much recognition

@MofutoraModeling 3 ай бұрын

Thanks again! That really means a lot!

@Ookinachinchin 3 ай бұрын

This is super cool thanks for sharing!

@MofutoraModeling 3 ай бұрын

Thanks for watching and for the comment!

@MikeCore 3 ай бұрын

This is sick! so motivational!!! Great work, keep it up! super inspiring

@MofutoraModeling 3 ай бұрын

Thank you so much! Will do!

@Sasq23 3 ай бұрын

Where can I get that model?

@MofutoraModeling 3 ай бұрын

Thank you for the comment. I actually modeled it myself. Sorry but I can't really share the model

@Sasq23 3 ай бұрын

@@MofutoraModeling Do you take commissions?

@MofutoraModeling 3 ай бұрын

I never have up to now. I could consider, but really just a hobby now.

@Burtram 3 ай бұрын

Your progress in one year is inspiring. I too have begun making my own things and 3d printing them. I have not done characters yet though, hopefully soon.

@MofutoraModeling 3 ай бұрын

Thanks for the comment! Nice I'm sure you can do it!

Ең жақсы KZfaq

Пікірлер