I have two much dirty plugs is it from the DI injectors ?? And when u changed the injectors did the problem gone ?? And why u didnt just service them instead of changed them
@mosesreyes35344 күн бұрын
How’d you do the radius arms??
@CmoneyGarage4 күн бұрын
Heat and air hammer (hammer and chisel will do the job too)
@ThiagoCBarna7 күн бұрын
insane bro...very cool
@CmoneyGarage7 күн бұрын
🙌🏾🙌🏾
@ThiagoCBarna7 күн бұрын
nice Tune bro...
@CmoneyGarage7 күн бұрын
🙏🏾🫡
@ae86ptan79 күн бұрын
How is the NVH with those yellow strong flex diff bushings?
@CmoneyGarage9 күн бұрын
Very similar to stock,noticeably difference when shifting hard, I can tell it stiffer and not moving around. Under normal driving conditions it's very smooth and quiet.
@Sessions110 күн бұрын
Damn man I just installed my kit and my engine is stuck/seized, is it because I have to cut the input shaft?
@CmoneyGarage6 күн бұрын
Not sure that could be a couple different issues
@Sessions16 күн бұрын
@@CmoneyGarage figured it out, let’s put it this way not all is300 starters work with this kit lololol
@CmoneyGarage5 күн бұрын
Lol....
@94zay5612 күн бұрын
I wish you guys could witness this car in person it sounds amazing 🚀🔥🔥🔥
@CmoneyGarage12 күн бұрын
🙌🏾🙌🏾🙌🏾🫡
@Kingen-tx4el13 күн бұрын
Making some jam 😮😮😮
@CmoneyGarage13 күн бұрын
Just a little...🫡
@94vibrantredboss14 күн бұрын
What all was the kit missing
@CmoneyGarage12 күн бұрын
Bracket for the Intercooler, an lone fore the fuel system and a fitting for the oil sandwich plate.
@Alexus_7Gs16 күн бұрын
thank you for the very informative video! really appreciate this type of content! awesome channel !! ill be doing this to my gs
@CmoneyGarage16 күн бұрын
Appreciate it 🙏🏾 🫡
@Fitlife198620 күн бұрын
What’s your exhaust setup?
@CmoneyGarage20 күн бұрын
4" turbo back to split 3" to Vibrant 4" Mufflers
@Fitlife198620 күн бұрын
@@CmoneyGarage any drone? From the down pipe your running straight pipe to the vibrant mufflers.
@CmoneyGarage20 күн бұрын
@Fitlife1986 yes it does have a little drone,nothing too crazy
@jerryorden929421 күн бұрын
That’s awesome bruh! Great build and can’t wait to see you in the streets.
@CmoneyGarage21 күн бұрын
🙌🏾🙌🏾🫡
@Mr_Nycee_Williams21 күн бұрын
Absolutely not going thru to much with this damn hawk
@CmoneyGarage21 күн бұрын
Lol....Mopar or No car 👀
@Mr_Nycee_Williams21 күн бұрын
My guy!! Wanna be like u when I grow up 😂
@CmoneyGarage21 күн бұрын
You must love problems.....lol
@the.ghost.behind.u22 күн бұрын
The all black setup in the bay looks amazing. Ill be going the same route (have a 062 white ga300) also love the Treadstone couplers. I went Treadstone TR1035 Intercooler for mine.
@CmoneyGarage22 күн бұрын
Thank you...🙌🏾🫡
@angelomartinez67423 күн бұрын
are they still going strong any shaking or nosies ?
@CmoneyGarage23 күн бұрын
All good, zero issues so far.
@Ja51824 күн бұрын
Hey man, any more videos on the kit install?
@CmoneyGarage24 күн бұрын
Sorry no video
@VenomizedZilla25 күн бұрын
Weak shit. Tell Jorge I said wassup.
@CmoneyGarage25 күн бұрын
Lol.....I'm actually here with him right now....he said what's up, you need to take a trip down here.
@fordmaster5025 күн бұрын
Congrats bro!! Absolutely love it!!
@CmoneyGarage25 күн бұрын
Thanks man 🙏🏾🙏🏾
@BobbyDully__P25 күн бұрын
Do you have a webpage or something to outline the list of items for this build. That CD009 is holding up quite well. I'm impressed. I love this build so much. Been here from the beginning
@CmoneyGarage25 күн бұрын
Thanks for the support....no web page just IG and youtube in the videos I try to cover every part I'm installing, that should give an idea, don't be afraid to ask 💪🏾💪🏾
@carlf30526 күн бұрын
🫡🫡🫡😎🔥🔥🔥
@CmoneyGarage25 күн бұрын
🫡🫡
@MakMilly_25 күн бұрын
@@CmoneyGarage crazy work. Gs on top.🔥🔥🔥
@CmoneyGarage25 күн бұрын
🙌🏾🙌🏾
@carlf30525 күн бұрын
@@CmoneyGarage 💪🏽💪🏽8
@JayB-fu2ie26 күн бұрын
I got to get on track with my gs build. lol My need hand there Gs master builder XD
@804MRMAN26 күн бұрын
Well seems it's all buttoned up... NOW SELL IT TO ME 🙂😐
@CmoneyGarage26 күн бұрын
Bring the bag and let's talk....🤔
@804MRMAN26 күн бұрын
@@CmoneyGarage Lol. That bag could be empty. $13.5k?
@CmoneyGarage25 күн бұрын
Add and 20k on that and we can have a conversation
@804MRMAN25 күн бұрын
@@CmoneyGarage 🤣🤣🤣🤣🤣 Bruh you tripping. You know we see the car? You know we actually seen what was put in it right? But I can't put a price on someone stuff though. I thought you was serious about selling though
@CmoneyGarage25 күн бұрын
Add up all the parts you see me put on the car and let me know how much you think I have in it.....😏
@LRo_9426 күн бұрын
Beautiful
@CmoneyGarage26 күн бұрын
🙌🏾🫡
@BadgerGT50026 күн бұрын
Making some good steam
@CmoneyGarage26 күн бұрын
Yes sir...💪🏾💪🏾
@PushingLoki-iu1tr26 күн бұрын
This popped up in my recommended to watch and It was definitely worth the watch too. I've been talking to Justin about getting my gs build tuned by him. If all goes right this weekend, i should be able to get it tuned this coming week🤙🤙
@CmoneyGarage26 күн бұрын
Nice....he'll definitely get it running right
@batingbaton458822 күн бұрын
What build you’re running for the gs?
@SrtifiedHawk26 күн бұрын
My kneeeegaahhh🙌🙌..if only I had 1 dollar for everytime this yankee bwoyie say super ..super dupes...
@German5188826 күн бұрын
What’s done to the bottom end?
@CmoneyGarage26 күн бұрын
Everything except main caps. CP Pistons, Manley Rods, Apr Everything,
@German5188826 күн бұрын
@@CmoneyGarage I hope to get my GS to your level one day bro. Badass car bro.
@CmoneyGarage26 күн бұрын
@German51888 thanks man 🙏🏾🙏🏾....keep working towards it
@ccabre26 күн бұрын
Congrats @cmoneyGarage. When are we racing? 😅
@CmoneyGarage26 күн бұрын
@@ccabrewhat you got?
@bamfkn_fd26 күн бұрын
"The Smoke" any takers?
@CmoneyGarage26 күн бұрын
💨💨💨🖤
@MySuprema26 күн бұрын
Great video you save me man thank you😀
@CmoneyGarage26 күн бұрын
🙏🏾🙏🏾
@RayPosada29 күн бұрын
One of my injectors are bad.. can I just replace one or should I replace all of them? 2019 mustang on E
@CmoneyGarage29 күн бұрын
You could get away with just changing the bad one but others will probably fail soon after. Might as well change all of them if you can afford to, if not just be prepared to do the job again.
@RayPosada29 күн бұрын
@@CmoneyGarage thank you for the quick response! Also, is it a good idea to change spark plugs after as well ?
@CmoneyGarage29 күн бұрын
No problem. At the least, I would inspect them and then from there, you can determine if they need changing or not.
@915RaiderMike29 күн бұрын
OMG never thought Welds would look so damn good on a Lexus!!! 🤤 beautiful car man! 💯
@CmoneyGarage29 күн бұрын
Thank you.....🤟🏾
@landygospel516729 күн бұрын
🔥🔥
@CmoneyGarage29 күн бұрын
Thank you luv
@bamfkn_fdАй бұрын
Thank you for capturing the moment. It was a really good time with the JDM/Mustang crew.
@CmoneyGarageАй бұрын
Thanks for the invite brother.....🙏🏾🙌🏾
@305jayyАй бұрын
My rx7 at the end lol😆🔥
@CmoneyGarageАй бұрын
I love how she sounds.....and looks sweet 🤟🏾
@bamfkn_fdАй бұрын
The FB is timeless. It was a great cruise up.
@305jayy19 күн бұрын
@@CmoneyGaragethanks 🙏🙏🙏
@305jayy19 күн бұрын
@@bamfkn_fd😎😎👍
@thelastjazzdrummerАй бұрын
my break pedal hisses and gets hard at the bottom. is this the issue?
@CmoneyGarageАй бұрын
Yea sounds like it's starting to fail
@kevinwhite1077Ай бұрын
nice love from the uk
@CmoneyGarageАй бұрын
🙌🏾🫡
@GasBrakeSimАй бұрын
CLEAN BUILD brother !
@CmoneyGarageАй бұрын
Thank you 🙏🏾🫡
@busyman411Ай бұрын
Nice. Machine looks good and sound good🔥🔥
@CmoneyGarageАй бұрын
🫡🙌🏾
@jakegunter25Ай бұрын
Solid vids man, is the bumper exit too loud for daily driving? Im going to miss my active exhaust
@CmoneyGarageАй бұрын
Its loud but tolerable
@gmaniumАй бұрын
engine bay looks beautiful good work man
@CmoneyGarageАй бұрын
Appreciate it..🙏🏾
@bamfkn_fdАй бұрын
Don’t let this video distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.
@CmoneyGarageАй бұрын
🤣🤣🤣🤣...I'll see you at Race wars bud
@bamfkn_fdАй бұрын
@@CmoneyGarage That's if you make it there while you are out there Granny shiftin' not double clutchin' like you should.
@CmoneyGarageАй бұрын
@bamfkn_fd don't worry me and the mad scientist got about 20k and we going to overnight parts from Japan.
@804MRMANАй бұрын
Ooooh you be racing @@CmoneyGarage
@CmoneyGarageАй бұрын
I'm slow, only fast guys race....🤣🤣
@luisesparza8568Ай бұрын
What do you do with the connection on the snout just cover it? The oem hose that would usually go from valve cover to snout
@CmoneyGarageАй бұрын
I just cap it off
@luisesparza8568Ай бұрын
@@CmoneyGarage what do you use to cap it off or where do you order a cap for it?
@CmoneyGarageАй бұрын
Google " silicone rubber end caps" amazon and Most parts store have them, I don't remember to exact size but that should be easy to figure out
@luisesparza8568Ай бұрын
Right on thanks. What about the hoses does it come with them if not could you let me know where you got them from and the lengths
@vargasaidan7366Ай бұрын
hell yeah
@CmoneyGarageАй бұрын
🙌🏾
@vargasaidan7366Ай бұрын
how has the build been so far? i wanna build a 2j soo bad...
@CmoneyGarageАй бұрын
Been pretty good, running strong
@turbogears900Ай бұрын
Where did you put your ecu ?
@CmoneyGarageАй бұрын
No stock ecu.. I have a Fueltech and that has the ecu and display all in one
@turbogears900Ай бұрын
Nice work .I want to wire tuck my harness on my toyota aristo jzs161
@CmoneyGarageАй бұрын
Do it...makes the engine bay so much cleaner
@SrtifiedHawkАй бұрын
Bay looking 🔥
@CmoneyGarageАй бұрын
Don't lie to me.....lol
@SrtifiedHawkАй бұрын
@@CmoneyGarage I tell no lies....
@Trey1209Ай бұрын
Very clean build bro, I’m aiming to have my gs300 clean like yours