Жыл бұрын
Пікірлер
@michaelweber4384 8 күн бұрын
Looks nasty... Can I have it?
@jdubcbr600 17 күн бұрын
Do you know what stator is in your converter?
@boostedS10 17 күн бұрын
I do not remember, it’s just the off the shelf 9.5” PTC converter
@jamey1e Ай бұрын
Thanks, I’m in the process of setting up a turbo LS on meth and this definitely gives me something to work off of👍
@boostedS10 Ай бұрын
If you have any questions don’t hesitate to reach out and see if I can help out!
@jamey1e 7 күн бұрын
@@boostedS10what line did you use from the cell to the pump? I keep hearing a lot of guys saying the pump will collapse the hose and to run hardline.
@boostedS10 6 күн бұрын
@jamey1e so far been fine for me, used a -16 AN line for the feed and -12 out of the pump into the regulator
@boostedS10 3 күн бұрын
I realized you probably meant what type of lines, I used just normal vibrant AN hoses
@Slowpoke99s10 Ай бұрын
Let us know how that Holley valve works, my truck doesn’t have anything in it right now. Just waste gate. Not sure what to buy. Was thinking about the Holley.
@boostedS10 Ай бұрын
My dual Mack valves were cheap and what everyone seemed to be using but just doesn’t seem to work for me, I will make a update video once I do order them and try them out
@HarveysHackShack Ай бұрын
Congrats on the new baby!
@boostedS10 Ай бұрын
Thanks man!
@tommymontgomery9571 Ай бұрын
Beautiful truck mane. Congrats on the baby
@boostedS10 Ай бұрын
Thank you dude!
@m4glk_5tick3 Ай бұрын
Congrats to you and the wife!!
@boostedS10 Ай бұрын
Thanks man!
@jason7475 Ай бұрын
So how about you figure out your boost pid settings.....
@boostedS10 Ай бұрын
Trying to, everything Iv tried didn’t change anything until now but with the truck off it follows the boost curve perfectly
@lifesgifts748 27 күн бұрын
@@boostedS10 try evans tuning he does videos on closed loop boost control very in depth , its like 50 buck for unlimited access
@jimthomas1989 Ай бұрын
Grand Prize -Wyatt But you can have him back just as soon as there needs to be a diaper change 😂
@boostedS10 Ай бұрын
😂
@jason6919 Ай бұрын
Proud of you kiddo. Basic facts promoting your merch store. 👌.
@nathancubitt7620 Ай бұрын
What crank pulley/ alternator bracket is that ? Thanks !
@boostedS10 Ай бұрын
It’s all ict billet stuff, I can’t remember exact part number but it’s their brand
@JohnnyCarr-nq3ve Ай бұрын
Time for a burst panel on that lid
@300exhauler Ай бұрын
😂😂
@Platypusthepro 2 ай бұрын
It’s just still sad to see because i really miss this place a lot 😢
@boostedS10 2 ай бұрын
Me too, especially since it’s 5 mins from my house lol
@Dan-hx9og 2 ай бұрын
I’m old I have to be boring if I ever did that with my Chevy equinox I wouldn’t be able to carry my groceries anymore on my fixed income.
@user-ij2xx6sv3u 2 ай бұрын
C- Clip eliminates are cheap!😅😂
@Dan-hx9og 2 ай бұрын
And now it’s garbage take it to the junkyard.
@ricktotz4078 2 ай бұрын
Should’ve had a Ford 9 inch
@ryankos6500 2 ай бұрын
Lmao OF COURSE ITS A CHEVY
@jasperyenger5629 2 ай бұрын
Lmao Chevy probs 🤣
@dontdogarage 2 ай бұрын
Axle looks broke on the end. Dont think its a clip issue
@donaldgibsonjr3448 2 ай бұрын
Dud realy 😂😂😂 wait you forgot the clip wife must of been hollering for you to get the kids 😊😊😊😊 don't feel bad iv been in your shoes😂😂😂😂😂
@josephspellman2698 2 ай бұрын
Forgot the $2 clip! dam.
@larrytidwell7885 2 ай бұрын
I've seen that happen
@danielalexander3777 2 ай бұрын
On small tires love the adrenaline
@jrandliz 2 ай бұрын
Not from a Ford. They will go kaboom.
@SammyGDude 2 ай бұрын
thats a 2500 HP rig right there... damn son. nice
@gregorygreubel 2 ай бұрын
😂😂😂😂😂😂😂what's your miles per gallon?how much hp?insane on my membrane 😮
@hermanmuenster1405 2 ай бұрын
You better have a few hundred pounds of counter weights over the rear tires in the trunk and have the tire PSI set just right
@billbrown6526 2 ай бұрын
Sweet music
@saihwithak 2 ай бұрын
🔥🔥🔥
@erwinmerida8891 2 ай бұрын
Very nice, clean truck.. even if wasn't fast, still nice
@boostedS10 2 ай бұрын
Yea that was just wastegate, if I turn the controller on it just spins to bad
@boostedS10 2 ай бұрын
But thanks
@Danielbright1978 2 ай бұрын
I choose boosted launches all day long!!
@boostedS10 2 ай бұрын
Hell yea💪🏽
@TKsGarage405 2 ай бұрын
I need in on this lol
@boostedS10 2 ай бұрын
😂
@helloyesh 2 ай бұрын
whats your truck make for power?
@boostedS10 2 ай бұрын
Actually makes around 1200 horsepower but a even 1000 was better for the title
@HeyLiana1 3 ай бұрын
That was awesome. Thank you so much just switched over using twin hellcat pumps in a surge tank with the new Holley 220 injectors
@boostedS10 3 ай бұрын
Glad it helped!
@HeyLiana1 3 ай бұрын
@@boostedS10 did you end up making more horsepower
@boostedS10 3 ай бұрын
@HeyLiana1 I think it did make a little more, unfortunately I changed rear gears so I can’t exactly compare the old pass’s to the new but it seems like it’s would have made a little improvement if I did leave the gear how it was
@HeyLiana1 3 ай бұрын
@@boostedS10 hoping this terminator X reads the methanol OK
@boostedS10 3 ай бұрын
@HeyLiana1 I may be wrong but I believe there’s something to do with the 02 sensor on a terminator being different and can’t do methanol, I’d just look into it
@andrewfisher6229 3 ай бұрын
Beautiful truck, what puley spacing and pulley accessory drive did you go with for the ati balancer and htd drive, alternator n tensioners, Corvette, camaro, etc. I'm trying to order my balancer with htd for mechanical fuel pump and am stuck because i don't know what the best Ls pulley spacing set up is with the s10 and pulley accessories, everything I see online is like classified lol any help would be appreciated
@boostedS10 3 ай бұрын
I just ordered the htd drive balancer and I only run a fuel pump off of it, so unfortunately I’m unsure about the spacing for all the accessories. Previously I used f body stuff when I had an alternator. It was all ict billet parts
@boostedS10 3 ай бұрын
And thank you man!
@andrewfisher6229 3 ай бұрын
@boostedS10 I appreciate it a lot bro !!!
@GabeRyanMedia 3 ай бұрын
Sweet truck. Good vid. You've got my sub! 👍🏻 Lots of good inspiration for my '88 S10.
@boostedS10 3 ай бұрын
Hell yea glad I can help with that💪🏽 and thanks for the sub!
@TKsGarage405 3 ай бұрын
What a waste. People need to stop raising liberals lol
@TKsGarage405 3 ай бұрын
Does it have ring gap?
@boostedS10 3 ай бұрын
Honestly don’t remember what it is
@TKsGarage405 3 ай бұрын
Just subscribed and came to see what’s happening lol
@boostedS10 3 ай бұрын
Thanks man💪🏽
@johnnyrhea192 3 ай бұрын
Ther is another drag strip opened up in lufkin texas now called pine valley race way great track and is nhra certified
@boostedS10 3 ай бұрын
Unfortunately they haven’t had any radial tire events yet so a lot of us have yet to try that track
@helloyesh 3 ай бұрын
Where’d you get that carbon wing?
@boostedS10 3 ай бұрын
It’s just carbon wrap on a aluminum wing from innovative racecraft
@HarveysHackShack 3 ай бұрын
Such a shitty deal. Was a great track and facility.
@boostedS10 3 ай бұрын
Definitely, especially since the year I moved to Baytown is the year it shut down🤣 but wish they just had more events held to keep it open
@HarveysHackShack 3 ай бұрын
@@boostedS10 I think they made plenty money, just tired of all the bs around it and got a crazy offer so they sold it. Sucks but just money to them.
@pitchforkpeasant6219 3 ай бұрын
@@HarveysHackShackwhat kind of bs was goin on? Race tracks and shooting ranges closing down alot it sure seems
@HarveysHackShack 3 ай бұрын
@@pitchforkpeasant6219 all the dust from the neighboring concrete crusher and then all the complaining from the fast growing residential areas around the track.
@713racing1 4 ай бұрын
5.30s 👀👀
@boostedS10 4 ай бұрын
👀👀🤔
@boostedS10 4 ай бұрын
Close but believe this one was a little faster then that
@cheapskatenation 4 ай бұрын
I can't wait to go to the track this year, maybe I should move South
@boostedS10 4 ай бұрын
Y’all don’t race in winter, we don’t race in middle of summer down here lol
@goodolboyzoutdoors841 4 ай бұрын
keep up the videos bro I am still working on my pops s10 blazer I'll be out there with y'all guys one day.
@boostedS10 4 ай бұрын
Hell yea man, keep it up! We always can use more of us to race with at the track!
@goodolboyzoutdoors841 4 ай бұрын
@@boostedS10 yes sir I am still saving up for a dart block in time in time
@boostedS10 4 ай бұрын
Gonna be way faster then me then😂 I can’t afford that dart block life forsure
@goodolboyzoutdoors841 4 ай бұрын
@boostedS10 I honestly don't know man pop's was the one teaching me everything before he passed away and left everything I just know it's a 350 dart block Board 60 over and with the Internals it's supposed to be a 396 Stroker with a 2 stage nos kit but the block is like 5k and trying to save up and also take care of my son is hard but I miss racing and doing this in my pop's Memory
@boostedS10 4 ай бұрын
Yea they are definitely expensive, but that’s cool as hell man, keep it up and just keep moving forward and you will get there.. make him proud man!
@YovngIcy 4 ай бұрын
I love seeing how me recording it made the video better
@boostedS10 4 ай бұрын
Yes sir, thank you again for that video!
@jackperry9369 4 ай бұрын
Great stuff man 😮
@boostedS10 4 ай бұрын
Thanks man!
@YovngIcy 4 ай бұрын
Good races