VROOMS GARAGE & ATV

Пікірлер

@edgarsknowledge6838 Күн бұрын

I just confirmed it, it’s the same for 2023 Tahoe. Thank you!!

@TimothyHarakal 2 күн бұрын

Do you have to do that to do front brakes

@jamikelly9629 3 күн бұрын

Where did you purchase the Nissan CVT fluid from..??

@jeffward158 6 күн бұрын

35k needed rears also. 70% front 17% rear.

@legion1630 7 күн бұрын

once you take the ugly factory side steps off..this truck will be perfect..ha ha

@vroomsgarageatv 7 күн бұрын

@@legion1630 I did the next day lol they were all rusted

@joefeinman4490 8 күн бұрын

My truck wore the pads on the inside much faster as well. My wife has a 2019 Acadia and hers did the same. With her car I pulled the slides out (where the caliper bolts on) and cleaned them and re-greased them with anti seize and it fixed it on her vehicle, so I will do the same with my Silverado. Seems like GMC uses crappy grease on the slides from the factory.

@maurymoynihan5245 9 күн бұрын

Can I bypass the wear sensor by just tying the wires together?

@vroomsgarageatv 9 күн бұрын

@@maurymoynihan5245 you can disable the wear pad indicator on the dash. Just scroll through the different menu items like oil and air filter life and ther should be one for break pad like you can then select to disable it. Mine is disabled no issues

@StarknightMT_official 10 күн бұрын

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your 2024 POLARIS RZR XP 1000

@vroomsgarageatv 10 күн бұрын

@@StarknightMT_official yes I would be interested for sure I was thinking I need to get one

@StarknightMT_official 10 күн бұрын

@@vroomsgarageatv Hi, thanks. please let us know your con tact way

@vroomsgarageatv 9 күн бұрын

Would you like my email or number? can I contact you on your website?

@StarknightMT_official 9 күн бұрын

@@vroomsgarageatv E mail, please

@StarknightMT_official 9 күн бұрын

@@vroomsgarageatv Hi, please e m ail

@chardonnaytelly214 12 күн бұрын

How do you resent the sensor?

@vroomsgarageatv 13 күн бұрын

It wears off the brake pad surface pretty quick I just do it to keep it from rusting so fast

@travelinthru9519 13 күн бұрын

You don't paint the roter

@user-xr1ue2vf6h 17 күн бұрын

Looks good. Thank you for showing us.

@alvarezz09 19 күн бұрын

dude this is crazy i have the same problem i just finished changing my pads and rotors. I have a 2020 GMC sierra 1500 drivers side rear inside pad was at the metal and out side was at like 60%. It was the same for the right side too i only have 26,000 miles. There should be a recall because this to me is a manufacture defect.

@terryatchison8307 20 күн бұрын

2021 sierra 70,000km, inside pad next to nothing left, outside one fine

@ScottFinley-xe1kk 20 күн бұрын

If you are only draining the ATF from the oil pan it is not an oil change. Much unlike the engine, in which all of the oil drains away from all of the parts into the pan, the transmission does not. The transmission holds most of it's oil in the torque converter and valve body. This is only a 1/3 oil change.

@kodeland7729 20 күн бұрын

Works to turn it on. Won't turn it off for me

@Letsdraw123 21 күн бұрын

Had one, crashed it, would stillmiss it every day if i hadnt gotten my e89. Fun little cars👍

@frankiehawn8349 23 күн бұрын

I dont like the dash. It seems they have eliminated storage and no room for switches. I dont like the door handles in the middle. How are you going to put an enclosure on it? Also it seems like a lot of places on the door for mud to get in. It will be hard to clean. The tires still do not even come close for east coast riding...Can you put 35s on it without modifying the A- arms?

@vroomsgarageatv 23 күн бұрын

To put 35s you Would have to clutch it and you would loose a lot of power. I would recommend getting one of the turbo models if you wanted to go that big of tire I might go with 32s in the future. I also didn’t like the dash at first with the center display but it grew on me and now I like it. Also the tires are a lot better than the ones from the previous RZRs and compared to the base model. And the chassis does feel a lot stiffer then the previous model as advertised. As for the door handles you do have to get an exterior handle installed when adding an enclosure which makes it better but I don’t like the idea of cutting into the door it seems cheap. I do like that they are full doors they seal better than the previous model and aren’t any harder to clean. Over all I do like it and it’s been a great machine. Thanks for the comment.

@smokintdi1757 23 күн бұрын

Pad wear is from the traction control.

@Dvniellthomvs 24 күн бұрын

Good lord.

@darianwhite4267 24 күн бұрын

Man i appreciate this bro. did you end up changing your rotors as well??

@christopherrivera175 29 күн бұрын

That trick made the situation worse smh😢!!!!

@alcarriere2365 2 күн бұрын

Can you explain this comment? I'm looking at doing brakes soon but want to make sure there are no surprises. How did this make it worse for you?

@heathdoan4602 Ай бұрын

The brake pads wearing unevenly is a GM thing I have a 07 GMC Sierra GMT 900 and I’ve had that happen to me a few times

@WIZEMART Ай бұрын

There is a little pump called transmission fluid/oil pump with like an 1/4 inch hose - you can buy one and use it. I was so mad on Nissan when I found water there that I broke that styrofoam undreamt to remove it. Don’t do it - it’s like a ~$100😮

@billybudd6776 Ай бұрын

Damn so 1200 dollars for a shop to do it all isn't really crazy and that's including parts Thanks, I'll pay the piper.

@MW-lx4cn Ай бұрын

Great video! I broke a seal trying to turn the piston in not realizing I had to put it in service mode. Found this video and it was a game changer.

@joseleon130 Ай бұрын

Release the foot of the brake release you're foot off the button 😅😂😂😂😂. Well sir? Use my foot or finger lol

@robert1245 Ай бұрын

Check J.A.P.S video on rear brake change he noticed his inside clip was messed up and the spring back action was not working. I would imagine a lot of these trucks are like that and that’s why the inside pad is wearing so soon. Just a theory though. Great video.

@1723tommy Ай бұрын

My inside pods was zero when outside almost new. 56000 miles

@JR1991-xe1ey Ай бұрын

Will this work for a 2019 chevy blazer ?

@vroomsgarageatv Ай бұрын

I’m not sure but wouldn’t hurt to try

@707SonomaComa Ай бұрын

I changed front pads and RF pad sensor wire on a 2022 1500 3.0L. Now the Brake, ABS, Traction Control, and Engine lights all came on. The brake pedal has to be pushed hard for it to stop, like a power booster went out. And it's in "limp mode" and will not drive over 43mph! The SnapOn scan tool says must disconnect the Brake Fluid Reservoir Sensor Wire to do a six step sequence for automated bleed. You can barely see it let alone touch it. I scanned it and tried erasing all the codes but that still didn't help. Do you have any ideas how to get the brake pedal back to normal, take it out of limp mode and erase all the lights on the dash?

@AngelaMiller-oi8ur Ай бұрын

Hey bub ... just changed my rotors and pads last night .. unaware of the break service mode on these (mine is a 2021 GMC Sierra 1500 3.0L Diesel) - now it's throwing all of these signs you stated & it won't travel faster than 43MPH... did you find a solution to this problem? I hear clearing all coded with a scanner can fix it, but I haven't had a chance to try that until later tonight... any tips would be greatly appreciated

@Blumom2021 26 күн бұрын

I used a scanner and cleared codes on a 2021 Denali and it cleared it .

@707SonomaComa 26 күн бұрын

@@AngelaMiller-oi8ur I tried using a SnapOn scanner and it did not resolve any of the issues. It was late and unplugged the battery and left it overnight. The next day I hooked up the battery and all codes were gone, no warning lights, and pedal was fine.

@darylmorse Ай бұрын

A few comments. By partially removing the intake manifold and not cleaning the mating surfaces or replacing the gaskets, you're asking for an intake manifold leak, as well as for debris to fall into the intake ports or onto the mating surface. You should completely remove the intake manifold, clean the mating surfaces and replace the gaskets. Also, you should prime the oil system after replacing the oil filter housing. You do that by disconnecting the injectors and the coils, removing the spark plugs and turning over the motor. I think you're supposed to do that three times or until the oil light goes off. That way, you know the engine will have oil when it starts for the first time. Finally, to BMW, after decades of producing shitty oil filter housing gaskets, maybe it's time to fire the engineering department.

@jordan8973 Ай бұрын

U forgot the filter

@danheaterdesertlife Ай бұрын

I just never changed strut before I call it shock but has to be fixed save alot money fixing everything myself but his seem to easy mines going be a rust nightmare bought everything replacing whole front end screws it

@96cr Ай бұрын

seems like you should just replace the whole front end since its coming apart

@jimibones178 Ай бұрын

Yeah, but what do you do if you didn't know to do that and now you can't push the piston back in

@AngelaMiller-oi8ur Ай бұрын

Did you find a solution to this bub? Same issue I'm having on my 2021 GMC Sierra 1500

@jimibones178 Ай бұрын

@@AngelaMiller-oi8ur had to change the caliper. but youll probably have to take it to a shop after that. changing the caliper allowed me to drive it, but that brake still wasnt working so the truck limited my speed to 43mph cuz i only had 3 brakes. shop had to hook it up to a computer. they only charged me $200 which aint bad. they also bled that brake for me for that $200 gotta wonder how many shop hours these diks have wracked up due this electronic brake sht. just about anyone with a truck is use to changing their own brakes

@garionhumphrey9482 Ай бұрын

Whats your setup man please lmk

@MikesMeals72 Ай бұрын

I do have a question. Do you need to put your truck in “brake service mode” to do the front brakes or just the rear? I must be lucky. 2020 Silverado 84,000 miles and I am just getting ready to change the brakes now, for the first time. I bought the truck with 7 miles on it. All of them wore evenly. Great video helped a lot!

@MoparArtbyautomolove Ай бұрын

I love how all the bolts came out so easily. Mine were rusted beyond belief. And most of them were off within the last few years. Sad.

@UnpleasantNinja Ай бұрын

It was easier & quicker doing it this way then trying to use the scan tool. Much obliged!

@mrclake06 Ай бұрын

Works on 21 Yukons too

@rileylessard6245 2 ай бұрын

😂wtf? Just remove the engine why don't ya...

@vader540is 2 ай бұрын

will this work on a 2019 GMC Acadia?

@alexadelaide 2 ай бұрын

Toyota when they cook they cooooook

@checho1010 2 ай бұрын

worked like a charm...had a bunch of dash lights come on after though. Used OBDII scanner to clear and didn't work at first...then messed with some settings and managed to clear the code with ignition on but engine off mode. Now running like normal again

@avonia6016 2 ай бұрын

I can’t get the cap off😢

@sirlosealot8629 Ай бұрын

I had to break ours off

@chaelcanterbury8787 10 күн бұрын

Same. If you look at the most replayed moments of the video, it's exactly on the moment he removes the cap. And the cap doesn't remove the way he says it does. Something is fishy, he may have removed it prior to filming or something, but the lever doesn't work the way he shows it does, so everyone keeps reviewing this segment trying to understand how it works with no success.

@Jbmc65 2 ай бұрын

I just watched another video about changing pads and his inside (where the wear sensor is) was much more wore like yours. His was actually wore right down but outside looked exceptional, weird.

@pipelinemechanic731 2 ай бұрын

Engine noise!!! I guess it’s expected since it’s a high Rpm machine. Heck it’s pulling 5000-5500 rpm’s at 20 mph. Everyone that drives it , says something about it, like it needs another gear, it’s loud, is something wrong with it, we can’t even hear the stereo over it. I got some sound dampening material coming. Maybe that will helpHopefully that will help.

@scottdingwall1223 2 ай бұрын

Life saver with this brake service mode.. thnax!! My insides were completely gone while the outsides looked brand new.. curious what would cause that?? Anyway.. thanx so much for your help!! Niagara falls Canada here in my 2019 with only 33,000 kms!!

@an3ony 2 ай бұрын

6.38, you had me going! (thanks for posting)

Ең жақсы KZfaq

Пікірлер