Bobs Outdoors

Пікірлер

@eroom2087 7 күн бұрын

I turn my screw all the way far as it would go, now dealer is mad because I paid for a 25 hp tractor and got a 35

@StarknightMT_official 11 күн бұрын

Thank you for your amazing video!🤩

@flyingturtle3384 12 күн бұрын

Who makes that engine

@lyndonhamby7432 20 күн бұрын

I have a CK 2610 also for 2 years. Love it. Stay safe 👍🏻

@cxs379 28 күн бұрын

Your shop is exactly what I hope to build for myself soon.

@BillPiasta Ай бұрын

Great place and good job 26:09

@jimmywarren6685 Ай бұрын

Nice ballast...BUT...and I mean a BIG BUT...there is not enough ground clearance. You couldn't use that ballast in the woods without getting it hung up on the ground or something else.

@bbhmltn Ай бұрын

That’s funny because I literally use it in the woods all the time.

@jimmywarren6685 Ай бұрын

@@bbhmltn You couldn't use it in the woods that I use mine in...that clearance would keep it hung up!

@robjohnson6747 Ай бұрын

Great video and I used mine for the first time yesterday and it did a great job ! My surface cleaner wants to take off and levitate , gotta hold it down ! You’ve got a beautiful place my friend !

@Bearsdenadventurues Ай бұрын

brother i like that heater. I'm in Florida so don't need one. but do like the idea

@StarknightMT_official Ай бұрын

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your 2024 CFMoto UForce 600

@bbhmltn Ай бұрын

Hello! You can email me at [email protected] to discuss. Thanks!

@nicknorr6417 2 ай бұрын

Use a turbo nozzle..its for cement and such

@gildopregadorderecife1975 2 ай бұрын

Boa tarde amigo. Você tem como dizer o preço desse carro moto?

@donaldstrishock3923 2 ай бұрын

At 200hours for 2 YEARS of use is kind of Expensive ( like 150.°°$ an hour). Time is ticking away on the Warranty. A "usage" of at least 400 hours per year is WAY more justifiable. This Tractor is going to outlive your Great-Grandchildren before its "broke-in".

@gharis04 2 ай бұрын

I have 2020 600. Just wondering does Yours have wireless winch remote? Mine has. Mine 600 didn't come with mirrors to.

@JohnBartels-zn3ze 3 ай бұрын

I like your manlift idea.

@corykroeger2231 3 ай бұрын

Great Video thanks. i m currently trying to the deceide on the 600 or the 1000 UForce. Im leaning to the 600 just to save some money.

@jondevos7535 3 ай бұрын

Have anymore info on the 3rd seatbelt setup?

@bbhmltn 3 ай бұрын

I just picked up a lap belt from advance auto and bolted to the seat belt bracket already there. Nothing to it

@jondevos7535 3 ай бұрын

@bbhmltn awesome thanks. Just bought one today to pick up on Friday. It's one of the first mods I'll do.

@Youyuppers 4 ай бұрын

Does this have a built in downstream injector?

@bbhmltn 4 ай бұрын

@Youyuppers 4 ай бұрын

@@bbhmltn hmm. the location of the soap injector would have led me to believe otherwise.

@richardjohnson6053 4 ай бұрын

After being a polaris ranger and sportsman owner, I decided to go with cfmoto uforce 600. It's a definite work horse. So awesome with toughness in design. The fuel mileage is great, 4x4 capabilites are more than adequate. I made changes to mine . Headack rack, wire roller... love it. So impressed.

@dannyo957416 4 ай бұрын

All the toys in your garage look like they’re never used

@bh870 4 ай бұрын

got mine in 21, good idea on bed extender

@JimJarvis-np9jy 4 ай бұрын

Z950 sport over and very happy. And my reasons also was.price and warranty. Good deal. Have fun with it

@McFreedom_af 4 ай бұрын

It'll still hit 60 with the cab, btw.

@McFreedom_af 4 ай бұрын

Correct, no more 800 Uforce. I bought the same model with doors bumpers rockers. Just added the SuperATV roll bar to the bed for the 1000. Took some fabrication, but it looks great. Put a bench seat in for the kids.

@patruddiman4228 5 ай бұрын

I wish your dealership was in Oregon

@LAMH 5 ай бұрын

Nice video. How difficult was it to remove the metal tubing to the left of the drivers seat (keeps you from falling out)? I find it difficult to get in the UTV, but removing that bar would help!

@bbhmltn 5 ай бұрын

It was pretty easy. With doors on I didn’t want the bar on my side. The wife wanted to keep hers

@LAMH 5 ай бұрын

@@bbhmltn Are they bolted on or do you need to cut the tubing?

@bbhmltn 5 ай бұрын

@@LAMH They’re bolted.

@LAMH 5 ай бұрын

@@bbhmltn Thanks! The ones on my Polaris needed to be cut. Bolts are much easier!

@accurateexteriorsco 5 ай бұрын

so normal mode is actually eco mode. limits the rpm and makes it smoother. work mode is actually like more of a sport mode. removing the limiters.. more rpms and higher top speed and snappier throttle response.

@bbhmltn 5 ай бұрын

Not on my 24. Opposite. Normal mode lets it eat.

@accurateexteriorsco 5 ай бұрын

@bbhmltn wow thats crazy, im picking mine up Saturday but on the 2021 & 2022 it was opposite. My bad , i was going off the videos ive seen researching the bike before i bought 1. Again my bad maybe they changed it up.

@KLAMATH32 5 ай бұрын

How spendy were those doors?

@bbhmltn 5 ай бұрын

I believe they were $899 per door.

@bigh63501 4 ай бұрын

I just bought a ranger 1000 in November I have 300 miles on it now run and rides great but I wish I would have heard about the cfmoto then so I could have looked at them . Iam going to look at a blind heater I never thought of one of them thanks

@43dukedog 5 ай бұрын

I have the same 2024 model and mine came new from the dealer with absolutely no seatbelt limiter or throttle limit in any mode whatsoever , low range, diff lock , or reverse and no seatbelt flashing indicator on the dash and I love it don’t know why it’s not enabled guess I got lucky seeing how most want to disable the limiting . It is for safety though

@aaronsanford9355 5 ай бұрын

Exactly what I am looking to do. What made you go with 4x4 instead of 6x6?

@ianproctor5222 6 ай бұрын

your built up beam should be a 3ply 2" x 10" instead of 2ply.

@sspadventures9374 6 ай бұрын

Thanks for making this video. I have a fresh 30x50x16 steel building and the plan has always been to build finished loft, and essentially where your workshop is, Im finishing a 10x10 office. Nice work. What is your post spacing, and OC on the floor joists?

@bbhmltn 6 ай бұрын

Thanks! My building is 42’x 60’ so the post spacing is roughly 14’ for the loft. The floor joists are 16” on center. I went that close just because I knew there would be a decent amount of weight up there and also because it’s 14’ deep.

@bryangrim6021 8 ай бұрын

Cool idea! 👍🏼

@BryanPAllen 9 ай бұрын

What are the Dimensions of this building? I heard you say the side walls are 16 foot but didn’t catch the footprint. Is it 40x60 or larger? Also what is the footprint of the mezzanine floor? Thanks

@bbhmltn 9 ай бұрын

The building is 42x60. The mezzanine is 14x42. Thanks for watching!

@BryanPAllen 9 ай бұрын

@@bbhmltn Thanks for the response Bob

@lonniecarrigan4325 10 ай бұрын

Buyers beware of Menards pole barns! I had a nightmare getting mine to pass local building codes after being assured it would! Do your due diligence !

@Patriot-pq1ku 10 ай бұрын

Probably why you pay for the shield under the seat

@edharper4647 11 ай бұрын

Closest build on youtube to my thought process for my 28x40x18. How wide did you go with your stairs? My shells up but no floor yet and thinking about plumbing for at least a urinal.

@bbhmltn 11 ай бұрын

My stairs are three foot wide. I wish I had plumbing inside but maybe someday

@Ib2Fried 11 ай бұрын

Hey just wanted to know if you still use it? Just got one and am worried bout it not lasting but i want to be serious with it and work

@bbhmltn 11 ай бұрын

Yes use it probably once a week at least. Works great

@TheRealChrisShades 10 ай бұрын

They can lost a long time. The part most likely to fail in the long run is the water pump. Research how to preserve the water pump on a pressure washer. You can also replace the pump with a newer one but a good one costs about as much or more then the whole pressure washer. Hence why the pumps are more likely to fail since they are cheap to help meet a friendlier price point for the whole machine. Good luck

@406dn7 11 ай бұрын

It looks like a thirty gallon drum, which is ~4.0 cubic feet. A cubic foot of concrete is ~150#. So your ballast weight is ~600# plus the weight of the drum. So a total weight of a tad less then 650#

@brianseawater6614 Жыл бұрын

good content, keep it up!

@scotthackett4500 Жыл бұрын

Super Nice Barn as it looks, sucks it took so long for delivery.🤦🤷

@ellobo1326 Жыл бұрын

I like your barrel ballast. I wonder if it could be modified so that the barrel is horizontal. Then you would have more ground clearance and possibly a bit more weight further back from the wear wheels, which would increase the ballast through leverage. 🤷🏻‍♂️🤷🏻‍♂️

@martinlopez8220 Жыл бұрын

Do you have a phone number for me that I could call

@martinlopez8220 Жыл бұрын

Could you have a car lift in this building

@bbhmltn Жыл бұрын

Yes, with a 16 foot ceiling you could easily install a lift

@martinlopez8220 Жыл бұрын

Will I be getting a response back from anyone

@martinlopez8220 Жыл бұрын

Good morning I would love to have a building just like with the upstairs loft 30 by 40 with only one roll up door and a single regular looking forward to hear

@leewheeler3131 Жыл бұрын

Tym 2515 lift capacity is 2200 lbs . The KIOTI c/m 2610 lifts 1800. Both good tractors.

@richardbritton5280 Жыл бұрын

Nice ty 🏆 😊 👍💪👴🐕🚜😎🕺

@cutweldngrind Жыл бұрын

I remember watching your 200hr review on the Kioti and this building sure looks different. I've always wanted to build a metal building like this just not sure if I should buy different land or build on my 8 acres. Looks great.

@blacktt3z Жыл бұрын

How was the lumber quality from Menards?

@bbhmltn Жыл бұрын

There was some lumber that wasn’t great but they send a lot extra of everything so you can pick through it and return the bad stuff for a refund to use on other things so it worked out.

@blacktt3z Жыл бұрын

@@bbhmltn Great thanks. Seems like prices are pretty reasonable for the structure.

Ең жақсы KZfaq

Пікірлер