Kioti CK2610 200 hour two year review

Рет қаралды 20,186

Bobs Outdoors

Жыл бұрын

200 hour honest review of the CK2610

Пікірлер: 30

@ryanwindham2997 Күн бұрын

Good review. I’m about to pull the trigger on a ck2620. Love the 55 gal drum ballast idea! Genius

@lyndonhamby7432 22 күн бұрын

I have a CK 2610 also for 2 years. Love it. Stay safe 👍🏻

@JohnBartels-zn3ze 3 ай бұрын

I like your manlift idea.

@bfoutdooradventures Жыл бұрын

The kioti tractors are a good bang for the buck! I have the bobcat ct2035(made by kioti) with 135 hours on it and no issues until a week ago. The steering gearbox was leaking from the top so it's in the shop under warranty repair. The only bad thing is the parts may take weeks to get here. Great little tractors for the price.

@Quilustrucu Жыл бұрын

Thanks for the idea of the ballast baril. 😉

@stevencamper8032 Жыл бұрын

I bought this model in June of this year. Mine leaked the same within 3 hours of use. Only leaked when using the 3-pt. Dealer picked up and repaired. Otherwise I’ve loved it.

@eroom2087 9 күн бұрын

I turn my screw all the way far as it would go, now dealer is mad because I paid for a 25 hp tractor and got a 35

@OShackHennessy Жыл бұрын

Nice review thanks. I really like the Kioti’s and considered buying one new but one of my friends ended up giving me a smokin’ deal on a Mahindra 6500. I didn’t know you could modify the horsepower is there a downside to that other than the warranty issue?

@leewheeler3131 Жыл бұрын

Tym 2515 lift capacity is 2200 lbs . The KIOTI c/m 2610 lifts 1800. Both good tractors.

@PeaceIntheValley Жыл бұрын

Looking at getting one of these. I have the RK25 and been happy with it, but I realized this weights significantly more than any of the other 25HP - probably because it's the same up to 40HP. I think I prefer the R1 or the R14 tires. What are your thoughts on the ones you have? I noticed that you put hooks on the bucket. I don't think it came like that. I did that on mine also and have used them a lot since doing that.

@bbhmltn Жыл бұрын

I’ve always had either the ag tires or the industrial tires. For what I do they work fine. Not saying I wouldn’t try the newer styles if I had the opportunity but I also know they’re more money too. I did weld some hooks on the bucket. I use them all the time. Thanks for the comment!

@alittlebitofeverything5090 Жыл бұрын

I have the same tractor and love it too. Have you already turned up the fuel pressure or considered it? From what I have been researching the motor in this is capable of producing the 35hp of its bigger brother, but they had to cut it down to 26hp to be below the thresholds of a diesel motor requiring emissions crap. Any thoughts? Thanks

@bbhmltn Жыл бұрын

Definitely thinking about it. I’m still under warranty so that’s a big part of holding off.

@alittlebitofeverything5090 Жыл бұрын

@@bbhmltn Good idea. The only issues I've had is the front axle was leaking a little and the proportion valve that lowers the 3 points speed was leaking. Both were faulty o-ring seals I replaced myself. Good tractors.

@alittlebitofeverything5090 Жыл бұрын

Another quick question if you don't mind. If you try to lift something that it too heavy, will the tractors rear tires come off the ground or does the hydraulic relief valve kick in before that happens? Thanks

@bbhmltn Жыл бұрын

It’ll bring the rear end up. Tire ballast and a rear ballast on the three point are good things. Also, always be ready to drop the bucket.

@alittlebitofeverything5090 Жыл бұрын

@@bbhmltn Mine won't lift the rear tires off even with no ballast or rear tires filed. I turned the pressure up but still won't

@garybergstrom3978 Жыл бұрын

Replace the green o rings with the black replacements and it should be fine

@ArcherHHS Жыл бұрын

Have you ever wished you had more HP? I'm debating between this and the ck3510

@bbhmltn Жыл бұрын

I guess for my usage it does fine. It probably depends on what your using it for. I’ve been very impressed with the 2610.

@ArcherHHS Жыл бұрын

@@bbhmltn I live in Georgia. Heavy dense clay here. Concerned about running tiller and a 5ft cutter in really thick grass and brush

@bbhmltn Жыл бұрын

@@ArcherHHS we have some hard clay areas here too. I usually till in low gear anyway unless it’s sandy soil. In low gear I’ve never had it bog down terrible unless I get into tree roots or something like that. Just my experience.

@ArcherHHS Жыл бұрын

@@bbhmltn thank you!

@pmaint1 Жыл бұрын

You can very easily turn up the power on the 25hp engine to 35hp since it's a detuned 35hp engine. Of course you'll lose your warranty if the dealer finds out.

@craigheitman1510 Жыл бұрын

Looks like you have a wear edge on your bucket… where did you get it?

@bbhmltn Жыл бұрын

My next video will talk about the wear edge. Thanks for watching!

@markcole6475 Жыл бұрын

eBay has some pretty reasonable cutting edges ….mine is a Titan brand I got for $75 shipped! May not be the hardest steel but it’ll still help save the bucket.

@Patriot-pq1ku 10 ай бұрын

Probably why you pay for the shield under the seat

@richardbritton5280 Жыл бұрын

Nice ty 🏆 😊 👍💪👴🐕🚜😎🕺

@donaldstrishock3923 2 ай бұрын

At 200hours for 2 YEARS of use is kind of Expensive ( like 150.°°$ an hour). Time is ticking away on the Warranty. A "usage" of at least 400 hours per year is WAY more justifiable. This Tractor is going to outlive your Great-Grandchildren before its "broke-in".