I can’t find it in aliexpress and can’t find it anywhere. I live in the U.S. and can’t find a single store online that sells this without getting scammed. Can anyone please help me find a website where I find this please.
@gelballblasterhub297229 күн бұрын
Ehobbyasia.com?
@Midnight_M550Ай бұрын
make one for me, how much you want.
@Poyshield21Ай бұрын
why so low..my m80 spring average of 300 fps while m90 has 350 fps
@louiquilang16982 ай бұрын
How to order drum magazine vector
@MydailyNinja4002 ай бұрын
What performance upgrades did you do?
@gelballblasterhub29722 ай бұрын
Check the description my man
@Alexxmidnight3 ай бұрын
Hello, I installed this mosfet, but I press the fire I hear a long "beep".. can you say me what is it? Thanks
@nroman_p4 ай бұрын
Awesome job. I have one question. For the selector switch, I see 3 wires. Is that a 3 pin lock/semi/auto for one switch?
@gelballblasterhub29724 ай бұрын
It's been a while since I'd last been in the vector but I believe so. I can confirm the mosfet retains the vector's original shooting functionality.
@keenangreen544 ай бұрын
🔥
@guillaumechristin65365 ай бұрын
thank you for your video. I just received mine and tried to fit it with the original Apache rubber tip but it didn't work. I'm going to try with the original tip. have you stalled at the same distance as the origin (gen8) or are you more forward or backward? Thank you for your answer
@gelballblasterhub29725 ай бұрын
So you tried 5 orings + apache + gen8 tip over the top just like my setup? Try match normal gen8 nozzle for starters. If I had to guess, more forward. You'd have to test and adjust as not all setups will be the same.
@guillaumechristin65364 ай бұрын
I'll test that then. thanks a lot for your help
@marctorres40535 ай бұрын
yo bro i just programmed mines today works mint thanks to ur vid made it easier than it was already i used the yellow and green wire also thats connected to magazine plugs so iv an still use the lever to prime im just confused on how to go theu the settings and change things like piston positon and the burst options any instructions online my mosfet didnt come with a manual but its running perfect as is one question tho is active breaking already on when i install or i have to program it
@marctorres40535 ай бұрын
this mag works better than the stock one for me it think my stick mag is fucked up inside or somthing breaks gel balls but the drum mag is kinda awkward to hold kinda uncomfortable wish i had the single drum heard they got issues but theres a fix
@marctorres40535 ай бұрын
bro can i get the link for the motor i keep ordering motors and theyre all to short or to long smh
@gelballblasterhub29725 ай бұрын
Try this mate - s.click.aliexpress.com/e/_DB35ck1
@ironnhaze97695 ай бұрын
Hello sir.. finally I've found someone doing tappetless gearbox.. can u share how u stick that cylinder nozzle?..
@gelballblasterhub29725 ай бұрын
How I stick the the rubber nozzle tips? Just with good quality shock-resistant super glue my friend.
@ironnhaze97695 ай бұрын
@@gelballblasterhub2972 so don't need the alloy nozzle right?.. only rubber tip..
@ironnhaze97695 ай бұрын
@@gelballblasterhub2972 standard gen8 mag.. can catch-up gel feeding speed?..
@gelballblasterhub29725 ай бұрын
@@ironnhaze9769 Yep. If you're going above 45-50rps then consider a high speed mag motor.
@kanzonoleiya9627 ай бұрын
I know it's a year late to comment, but did the yellow wire goes anywhere or you can just let it sit there?
@YuxuanHuang-rm3qx6 ай бұрын
Same here. I got everything in and I can't get the selector to work proper. It's just 3 round burst all around. Can you show the wires u soldered to the selector?
@minhnguyen40818 ай бұрын
Thank you so much. This fixed my XYL drum mag.
@drewmurray648010 ай бұрын
Cool idea ,throwing that together with a Apache was a smart idea bro
@MuhammadAzhar-wl1ti Жыл бұрын
how can you shoot with that speed and still get it straight ?
@gelballblasterhub2972 Жыл бұрын
Gotta have good seals, cycling and volume efficiency. Use a good quality barrel that's stabilized. Grow gels to suit the barrel ID and use a decent hopup
@devinpeters1270 Жыл бұрын
How did you program I got same gun and same mosfet and am stuck
@devinpeters1270 Жыл бұрын
Keeps what seems like over rotating
@gelballblasterhub2972 Жыл бұрын
@@devinpeters1270 Do the gears make a winding noise after firing?
@devinpeters1270 Жыл бұрын
No but after 3 or so shots the piston is out of position and won't shoot
@devinpeters1270 Жыл бұрын
I feel like I don't have it programs correctly. What do you have your settings on in the video?
@gelballblasterhub2972 Жыл бұрын
@@devinpeters1270 I believe I changed the battery option to 11.1v and turned off the lipo battery protection.
@tionglim7890 Жыл бұрын
Very nice, & what buffer tube you use at original adapter?
@gelballblasterhub2972 Жыл бұрын
Xpower buffer tube
@tionglim7890 Жыл бұрын
@@gelballblasterhub2972 no need modified? Why my adapter can't fit......
@julianext873 Жыл бұрын
this matherboard will bi ok for kriss vector 2?
@gelballblasterhub2972 Жыл бұрын
Yes
@drvova1752 Жыл бұрын
мой бластер перестал стрелять, это может быть материнская плата?
@shakkaclacka9150 Жыл бұрын
Nice man ngl this mosfet makes me want to dust off the vector especially with mk bringing out the cnc gearbox
@gelballblasterhub2972 Жыл бұрын
Agree! It's a shame that perun's vector mosfet won't be compatible
@PisangzChannel Жыл бұрын
With hopup?
@gelballblasterhub2972 Жыл бұрын
Yes
@PisangzChannel Жыл бұрын
Same sound with my build im using 13:1 with high torque..mybe 30 Rof same with u..
@ilikebirbs3381 Жыл бұрын
what hopup are you using? i have a little 3d printed one that slides on but you have one under the muzzle break?
@gelballblasterhub2972 Жыл бұрын
Using a 3d printed one also that pressure-fits onto the plastic barrel. It also fits snug inside the muzzle thankfully which pressure-fits onto the outer barrel (non-threaded one)
@johnh3733 Жыл бұрын
Nice, vector is one of those blasters that really stands the test of time. That particular DTU has battery protection which is the main reason why people blow out the original Mosfet board. Edit: Lol i did the exact same paint job
@gelballblasterhub2972 Жыл бұрын
Agree. If a kid were to ask me which blaster to get if they didn't wanna upgrade yet but wanted something good quality, sturdy, competitive at a field, and had all the bells and whistles, I'd recommend the vector. MK Tactical are also releasing their cnc gearbox soon which means upgrade potential is opening right up. Would be nice if we could use perun's vector mosfet so we'll have to wait and see. Need the ability to turn off AB to use brushless! Cheers John
@m.e.1704 Жыл бұрын
Still got it? How’s it been holding up?
@gelballblasterhub2972 Жыл бұрын
I blew the original mosfet. User error on my end - plugged in a battery with the opposite connection 🙃 I rebuilt it with 16:1 gears on a 28tpa motor. Less ROF but more torque. Hitting similar fps.
@m.e.1704 Жыл бұрын
@@gelballblasterhub2972 mad. Brushless? What motor?The tech guy at tac edge recommends against my purchase of a 45k warhead. I’ll wait til I at least have a metal box…anything else you can recommend? There’s really not much out there in the KZfaq space when it comes to this blaster….
@gelballblasterhub2972 Жыл бұрын
@@m.e.1704 Mine's not a brushless. 45k is quite fast and will generally have less torque than the slower versions. I definitely recommend 18:1 gears and no lower if using the 45k. Don't use 12:1's, 16:1's etc. You also can't use a weak spring or you'll get premature engagement (youtube it). A cnc gearbox is recommended. Make sure your gear shimming is good and angle of engagement is corrected. Purchase LDT aftermarket alloy cylinder head and nozzle for a better seal. No point upgrading at all if the seals aren't good. You'll want a good quality mosfet that can switch off active break, as you're not meant to use active break with brushless motors (they have it built in). So yeah, it's a lot to consider. OR... Keep the stock gearbox and motor. Metal gears should already be installed if you have the metal gear version. Upgrade to alloy cylinder head and nozzle, replace barrel for a 25cm one (if using the stock cylinder). Install a bigrrr mosfet and enjoy a reliable blaster that's much cheaper and easier to do.
@m.e.1704 Жыл бұрын
@@gelballblasterhub2972 thanks for the advice man. Since then; ldx box, shs 18:1 gears and pinion, alloy head and nozzle, bigrrr mosfet and shs hi torque motor (will have to change this, as active braking heats this up a bit…)
@m.e.1704 Жыл бұрын
Oh, and got a full metal body with RAS hand guard and a bifrost tracer…all of which rly aren’t needed, but wanted some bling
@Ortizz170 Жыл бұрын
What gel blaster is that??
@gelballblasterhub2972 Жыл бұрын
Jinming Gen 8 M4a1. Heavily upgraded of course
@Ortizz170 Жыл бұрын
@@gelballblasterhub2972 thank u
@muhammadjunaidi9189 Жыл бұрын
@@gelballblasterhub2972 how to upgrade the same as in the video
@OZPULSE12 жыл бұрын
I recognise that mag 🤣
@gelballblasterhub29722 жыл бұрын
Hello mate! A superb mag 👌
@UTDHKRF902 жыл бұрын
Hi mate. How is the mosfet hold up? I've been using ldx advance gearbox with bigrrr mosfet in it. Recently I change to shs high torque motor and 11.1v lipo. The motor grip and the battery are abit warm after playing 1set game. Just worry with shs high torque motor plus 11.1v lipo might damage the mosfet.
@gelballblasterhub2972 Жыл бұрын
My Bigrrr didn't last. Shs HT runs too hot. You'd be better off running a lower gear ratio and higher TPA motor
@axlfn80312 жыл бұрын
How do you get this gun?
@dibw53942 жыл бұрын
Hey mate, how is the Apache going in the gen 8? Has it held up the last few months ?
@gelballblasterhub29722 жыл бұрын
G'day. It's still going strong mate. I think I'm getting a bit of PME using my bigger lipos but that's on 38rps. Will need to short stroke another tooth or bump up the spring. Not sure what my plans are yet..
@Wsp6932 жыл бұрын
What gun
@gelballblasterhub29722 жыл бұрын
Jingji SLR
@Wsp6932 жыл бұрын
@@gelballblasterhub2972 thx
@alotofeverythingkeepitquit24752 жыл бұрын
Can i buy one
@tomiokagiyu49312 жыл бұрын
Did you use a DSG?
@gelballblasterhub29722 жыл бұрын
Not for that build. 12:1 gears
@tomiokagiyu49312 жыл бұрын
Oh
@ih8sp1das2 жыл бұрын
will this mag fit on the jm x2 glock ?
@gelballblasterhub29722 жыл бұрын
Nope
@justlenny132 жыл бұрын
I have this gel blaster
@gelballblasterhub29722 жыл бұрын
Nice Lenny 👍
@Pigon28032 жыл бұрын
Randoms doing strange setup's at MW:
@racynfaratine2 жыл бұрын
what tracer and gelball did you use ?
@gelballblasterhub29722 жыл бұрын
Warinterest tracer mag + Warinterest tracer gels
@racynfaratine2 жыл бұрын
@@gelballblasterhub2972 I use the same thing. But the gelball doesn't come out smoothly. how long do you soak? mine about 25rps
@gelballblasterhub29722 жыл бұрын
@@racynfaratine grow as long as needed so the gels are only just smaller than the barrel ID.
@airagor93562 жыл бұрын
wait if airsoft is banned due to the whole. War games thing.... why is gel soft allowed?
@krampluck56182 жыл бұрын
this was three years ago
@amg65362 жыл бұрын
where can i bug one
@wowanimejoshua51492 жыл бұрын
Only legal way I can get one of these is by importing it and never showing it outside of my own street. Cause where I live it's illegal, but everyone knows everyone and there isn't any police for 10km so, I think I'm good
@Guncage812 жыл бұрын
It won't get through customs
@stayawake52132 жыл бұрын
I like 👍🏾 .
@shakkaclacka91502 жыл бұрын
Very nice dude. I'm glad you love the APACHE. We put alot of rnd into it and are showing the do indeed work everyday. Well done brother ❤
@gelballblasterhub29722 жыл бұрын
Thanks mate. Don't know if you remember but we actually had a little 5min call and you gave me some good tips for the nozzle tip setup. Appreciate it 👍
@shakkaclacka91502 жыл бұрын
@@gelballblasterhub2972 yeah bro I recall haha well done man she's singing nicely
@stephangarcia56272 жыл бұрын
Where can I purchase the mp5 or the Kriss vector I’ve seen on your channel? A lot of websites I’ve found have either been scams or don’t ship to the US
@gelballblasterhub29722 жыл бұрын
Hey man. It's a bit hard to offer advice as I'm not from the US. I'd probably try Aliexpress..
@plex42022 жыл бұрын
Want it
@bradleyshepard16882 жыл бұрын
Where can I get on
@bradleyshepard16882 жыл бұрын
One
@albania1001002 жыл бұрын
Yo dude there’s a party in the back round when he shoots it sounds like they turn the music off lol