[0001] Xtool x100 pro 2 - Nissan Frontier

Рет қаралды 42,945

4 жыл бұрын

In this video, I am using the Xtool x100pro2. I had cut a new key for a Nissan Frontier 2018 and didn't follow the basic rule of program all keys. So I had 2 original keys the would operate everything except starting after the program and this is correcting the problem to have 3 functional keys. If this helps or you liked it, please hit those like and sub buttons.
JenkinsLocks.com

Пікірлер: 35

@kenabi 3 жыл бұрын

the two different codes apply to two year ranges, where the bcm pin converts via encryption to either, but only one code will work with either the old or new immo systems. which is why it just generates both. old = 2003-2009, new = 2009+. it doesn't generate new pin codes every time. if it does, there's something screwy.

@mrdman094081 3 жыл бұрын

can this tool do the nissan 20 digit pin ?

@jonathancervantes5080 9 ай бұрын

I have a autel 508 also needing to program ignition key for a 12 frontier is it the same procedure or is it different immo scanner I have to use for trans keys

@JenkinsLocks 9 ай бұрын

I've never had an autel, but from my experience, all nissans with the NI04T key tend to be the same...when you start to program, all keys are erased and you must program all keys (existing and new) at the same time. The procedure is pretty much identical between my xtool prodpad 3 and my topdon pro.

@vinaimaharaj4769 2 жыл бұрын

I believe its pronounced as Stool

@erikaditya4896 3 жыл бұрын

Does it works with juke?

@JenkinsLocks 3 жыл бұрын

Nissan Juke? Yes.

@erikaditya4896 3 жыл бұрын

@@JenkinsLocks thanks, appreciate it

@chulkpower 2 жыл бұрын

No it doesn't work to juke , xtrail or qashqai I try it.

@chulkpower 2 жыл бұрын

Dosen't support nissan xtrail and qashqai

@JenkinsLocks 2 жыл бұрын

I don't think the xtrail was sold in the US and the qashqai is branded as rogue sport in the US. I don't have this scanner anymore so I can't check, but you may have to select a different region.

@petemartinez318 3 жыл бұрын

Can it actually reset miles?

@MisdaadKanaal2K22 3 жыл бұрын

Yes, but it depends on the car model

@JenkinsLocks 3 жыл бұрын

Like Met said, it depends on the vehicle. I will try to do a video this weekend on the procedure.

@MisdaadKanaal2K22 3 жыл бұрын

For wich car do you need it ? Or type of brands

@Flyinghawaiian1977 7 ай бұрын

I have the Xtool X100 Pro3(it looks the exact same as the Pro3) I can program the keys but the red immobilizer key icon stays on. Any idea why?

@JenkinsLocks 7 ай бұрын

It stays on after the is programmed, and you start the vehicle?

@Flyinghawaiian1977 7 ай бұрын

@@JenkinsLocks yes it will drive even. After 2-3 starts it needs to be reprogrammed.

@JenkinsLocks 7 ай бұрын

@Flyinghawaiian1977 that wouldnt be a problem with the programmer. I'd try a different key or if you've done that, check the ignition cylinder and security module...start simple with checking the wiring/connectors. Check for loose connections like grounds.

@Flyinghawaiian1977 7 ай бұрын

@@JenkinsLocks ok I will do that. Thanks for getting back to me so quickly.

@kyo9499 5 ай бұрын

Hey I got the same one so how do it program keys 2014 in up?