007 Graphene - Making it And Using it

Рет қаралды 19,970

10 ай бұрын

This is an omnibus edition so i have done these videos before but in small parts this is a longer version of the complete series - everything in one place!

Пікірлер: 70

@imadethiscomment5663 12 күн бұрын

You have no idea how much this has helped me with my DIY experimentation. From the bottom of my heart, thank you so much, mate.

@MarcusAurelius616 2 ай бұрын

Anthony Hopkins explains graphene. Subscribed 😂

@chiperchap 9 ай бұрын

Absolutely loving the omnibus channel Rob. You don't know how much time you're gonna save me searching thru all 0f the past videos :)

@TnTOmnibus 9 ай бұрын

i am glad it helps mate - that was the plan so it is good to hear it is having a good effect - cheers

@JeremyWilliams011571 5 ай бұрын

The guy that came up with flashing graphene also found that if you do it to plastics you het graphene and hydrogen. Now they are making an industrial sized setup. You can flash trash to get graphene and hydrogen. Clean up the environment and get paid.

@Awesomesauce596 10 күн бұрын

Thanks! Been on this rabbit hole and now I got another paper to look up. I've been wondering what the variety of the gaseous compounds that get released are.

@antonazzopardi7335 3 ай бұрын

Wow!!! Wonderfully practical and clear exposition of a super simple and cheap home-friendly procedure for making highly concentrated dispesed graphene. Thanks a million, Robert. This opens vistas for home experimentation: supercaps top of the list.!!!

@mikeconnery4652 6 ай бұрын

Excellent and informative video

@fowyb 3 күн бұрын

Such a good coat. 👌 I'm off to the local gym for some whey powder. 😎

@Tonicwine999 10 күн бұрын

Excellent video 😊

@Akawaki 10 ай бұрын

Amazing! Thank you for making :)

@TnTOmnibus 9 ай бұрын

Glad you liked it!

@rondesilva3077 6 ай бұрын

OMG this is sooo GOOD!! THANKS!!

@TheUMILLADOR 8 ай бұрын

muchas muchas gracias por sus aportes y conocimientos , podria ser posible que usara el grafeno obtenido con la proteina del suero de leche , en anodo de un supercapacitor con aluminio ?

@paps-personal-channel 5 ай бұрын

BRILLIANT!!!!

@jfitzerelli 5 ай бұрын

Your blowing my mind

@arnoekarts7114 7 ай бұрын

Good Job. Thank.s a Lot.

@jasonmorello1374 10 ай бұрын

One thing I am looking at, is that anthracite coal is almost 70 % graphite by form, and has about 10% silica. The question is, will it work as graphite in the blender method? These numbers are guesswork, as most people don't go after anthracite for graphitic content, but you can see it in the break of the material, and the silica is visible and weighable after burning it.

@TnTOmnibus 9 ай бұрын

it probably would mate - but i am guessing

@canadiangemstones7636 8 күн бұрын

70% graphite? Nope.

@bawerd 5 ай бұрын

Hi Rob, I am a great fan and a supporter! Thank you for all the great information and your contagious laughter! :) I have a question regarding centrifuging: do you have any pointers of the type of centrifuge to use? All I can seem to find on the internet is the kind where you put the material in small vessels and that seems a bit tedious - not that I mind tedious, really, but if there is an alternative that can centrifuge greater amounts I would prefer that.

@dennissorensen8765 6 ай бұрын

This is not exactly rapid prototyping, but what a vision and what tenacity!😎 Now the remaining 80% will be redesigning it as an EV, as we near the point of ban for ICE cars. 😅🙈

@atrumluminarium 6 ай бұрын

Would have been nice to see tests of how a graphene-less casein wafer compares to the graphene impregnated one. Also imagine mixing graphene with the recently published reverse-engineering of roman concrete that heals itself when im contact with water

@AndreaDingbatt 6 ай бұрын

Thank you very much for changing the music!!❤ Also thank you for the showing people how are to make graphine ourselves,!!❤ Argh 😂 you used the original music for the ekd.... Lmao!!❤

@joetaylor486 10 ай бұрын

This was fascinating, thank you v much. Concrete kayak, anyone? 😂

@TnTOmnibus 9 ай бұрын

cheers mate

@samwillard5688 5 ай бұрын

Fantastic. When you lase the tape, do you stretch it out? Or do it all at once? Something underneath?

@ByteMeCompletely 13 күн бұрын

What CPU should be the first implemented in graphene? The venerable 6502? z80? cray 1?

@TheBottemLine 7 ай бұрын

What do you think is the the best version of graphene that can withstand bullets ? The squooshy kind of the other kind ? As you said lol

@majtaylor9694 9 ай бұрын

You mention results from 3 passes. Are there any additional changes/benefits from additional passes?

@footstoolofgodflatearth2933 6 ай бұрын

How does the flashing of the graphite with the laser work again?

@kennethnewman9927 6 ай бұрын

Graphene added to UV resin for sla/dlp printing?

@JamieCann 10 ай бұрын

how would your serpent generaters go if you lasered graphene onto the 3d print instead of making a coil? I'd love to be able to experiment myself but not have a laser or 3d printer at the moment

@TnTOmnibus 9 ай бұрын

i have no idea mate - but I do have a lot to do and so it will take me a while to do anything about it

@hexcellent5673 8 ай бұрын

Thanks for doing this. I would like to do some experiments with concrete and was wondering what ratio you used of this graphene solution to cement? I would think the higher concentration of graphene, the stronger the cement will be. Also, does it have to be deionized water, would distilled water work?

@cronicjohnson 18 күн бұрын

I am wondering the same have you made it anywhere

@ToneTruong 8 ай бұрын

For the part where you make graphene with whey proteins, the paper said they stopped blending every 5 minutes to take a sample and to stop it from overheating (

@fowyb 3 күн бұрын

I was about to suggest that the pause was related to the duty cycle of the blender, but 30°C shouldn't be an issue for a blender, and nor should 30 minutes continuous use. On the other hand, I can't imagine this wet mixture generating 30°C either, so perhaps it was an abundance of caution due to duty cycle of the blender. - Once an appliance repairman.

@nateswenson2730 9 ай бұрын

Amazing video thank you! I'm just a little confused as to why I haven't heard anything about people or companies using these cheap, safe DIY processes to make graphene and use it to make batteries or capacitors. The conductivity and capacity of graphene is off the charts so why has no one made an insanely energy dense battery or super capacitor with it yet?

@KECAJ3001 6 ай бұрын

I would really like an answer on this perticular question. Please @nateswenson2730. if You find out... Help a curious soul. I think it might be what ill be doing through my entire life

@michaellefrapper5863 3 ай бұрын

So Could one use your acetone method directly mixed with ABS then ?

@Sirenir1 6 ай бұрын

do these graphene plastics still conduct?

@michaellefrapper5863 3 ай бұрын

Do you know the ideal ratio of Graphene to add ? Thanks in advance and thanks for all of the useful information. Oh, is deionized water important? ❤

@MarcoDaCruz-mu5cl 3 ай бұрын

Would 12 tons work for the hydraulic press or would it need to be 20 like in the video? Cheers!

@TheAtilioenei 5 ай бұрын

👏 👏 👏 👍👍👍

@bartekobuchowicz7870 6 ай бұрын

Wonder what capacity concrete graphane battery would have 🤔👋🤩

@jaredfox1005 2 ай бұрын

How strong was the graphene concrete after the 28 days?

@jpjay1584 Ай бұрын

can you try to DIY mix it into 3D printing filament??

@CC-BCC 8 ай бұрын

Can graphene be smelted into a mild steel bar and the the result be something much more stronger too?

@fluffypinkpandas 8 ай бұрын

after all graphine is just “better carbon” so maybe… yeah probably if you use the same processes

@Dr_Girthly_Baggington 5 ай бұрын

i'm absolutely horrified at what i have just seen. i can not believe you put it up on youtube considering all the people you might influence.. GEEZAH ??? YOU SMOKE WITH GEEZAH PAPERS ??? my lord, like smoking a news paper !!! although i really do like the laser graphene!!! GET SOME RIZLA ! nice vid, thanks for putting it up.

@michaelparrow9685 6 ай бұрын

How much heat can graphene take

@michaellefrapper5863 3 ай бұрын

Did you mean subscribing? Done. I thought you meant Patreon or something.😅

@boopfer387 5 ай бұрын

aerocrete w/graphene

@technicaladviser8356 6 ай бұрын

I had made it years ago but my specially designed blender is 18000 rpm, it's best

@user-gi5uk1ln4s 9 ай бұрын

Hello. May be you remember me 3 Years ago. Meanwhile we are doing fine and have an installation for 4000 tons. The only hurdle we have is that we need a register with the governement. Customers are waiting and it seems not tô be a problem. Keep on going Walter from Brazil

@axelcodr 9 ай бұрын

do you have a video about your process? good luck with the governmental aspect!

@Naomi_Boyd 6 ай бұрын

I'm pretty sure that people have been making and using graphene for at least a couple of thousand years, to prevent eggs from sticking to their iron cookware. Seriously, have you ever tried to sand the carbon off of an iron skillet? It's nearly impervious. The easiest way to remove it is to heat the iron until the thermal expansion of the metal forces the carbon to break loose, and then it comes off in big flakes, which is just another testament to the structural integrity of the carbon coating.

@dennis-nz5im 6 ай бұрын

And wrong! Polymer oil coating

@SuperReznative 6 ай бұрын

,and the cast pan Some have been in use fir 80 years

@r0llinguphill483 9 күн бұрын

I hate when people call it two dimensional. It is planar, yes, but not two dimensional.

@fowyb 3 күн бұрын

You are, of course, absolutely correct. Let us allow the lay folk their easier analogs without hating them for it though. 😉

@janetbaker7848 10 ай бұрын

This should be absolutely not allowed at all even to manufacture it! Do you not understand how dangerous this is the human body?

@jacobscrackers98 10 ай бұрын

Why?

@TnTOmnibus 9 ай бұрын

how dangerous is it?

@AnonymousAnarchist2 9 ай бұрын

The 13 year long study across over 100 diffrent universities is still being compiled. But what has been compiled and pisblished suggest that *clean* graphine and graphine oxide produced with biocompatable materials do get cleared from the body via the natural routes after a month or two. These studies even explicity cite the blender and whey method of production. That could pose an extreme hazard for a full time worker, with build up over time and constant aggrivation but for at home use not so much. Simular to how Acetone (Nail polish remover) is extremly dangerious to industrial workers, but children are just fine to use it with no ill effects at home. As far as lazed induced flash graphine, that is already bound, Unless your grinding it up and intentionally injceting it its not getting inside you. But they did test that as well. It clumped, caused inflamation at the injection site and then was detected in the bladder before no detection about a month later.

@mememan2344 9 ай бұрын

Probably as dangerous as anything else that offers a alternative to the energy grid 😂😂😂😂😂😂😂 did you know gas is carcinogenic? Yeah really dangerous don't use it!!!!!

@petevenuti7355 6 ай бұрын

She's likely thinking of the fibers like asbestos, The body can't break down cellulose either you know , no one talks about how dangerous paper is. Graphene is likely closer to paper then fiberglass is relative to asbestos.