04 - 08 chevy malibu lower ball joint / control arm
Рет қаралды 125,280
6 жыл бұрынIf a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jonathanrenteria1986
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com/shop/themechanic
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support !
learn how to change your lower control arm in your Malibu and save some money.
If the video helped you and you would like to show your appreciation by donating what you can please visit my patreon . Thank you
@psecedo3913 5 жыл бұрын
Very helpful video. It is worth mentioning that if you have to replace the lower left control arm, you have to remove the engine mount too.
@themechanic6117 5 жыл бұрын
Yes that's true if you have the v6 engine👍
@thomasbergman442 5 жыл бұрын
No, you don't have to mess with engine mounts if you have ratcheting wrenches.
@jayryan7473 5 жыл бұрын
@@thomasbergman442 Um... you're WRONG if it's a v6
@thomasbergman442 5 жыл бұрын
I'll keep that in mind asshole! Lol
@steviemaldonado2237 2 жыл бұрын
It's a tight squeeze for that long bolt
@briansturgill5905 2 жыл бұрын
Thanks for the video! They quoted me $900 for both fronts. This looks simple and will save me like $700 in labor! You rock.
@themechanic6117 2 жыл бұрын
Wow that's a high price. With parts and labor I charge about $430 to do both of the front lower control arms .
@pear44ms 4 жыл бұрын
This is, this helps me so much on my 05 Malibu! I have to buy a pry bar set and a rubber mallet to help out. Good job and very complete !
@themechanic6117 4 жыл бұрын
You're welcome. Thanks for watching
@iftikharqureshi654 5 жыл бұрын
Excellent video so clear and methodical for replacing and putting back the control arm, Thanks for uploading
@themechanic6117 5 жыл бұрын
Thank you for leaving a comment and watching 👍
@DesertCruiser1 8 ай бұрын
Was very helpful to see this before doing lower control arms on my 2006 Malibu LT ty
@themechanic6117 8 ай бұрын
You're welcome
@scottketchum2224 5 жыл бұрын
Thanks for the video, torque specs, socket and wrench sizes makes this a very useful video.
@themechanic6117 5 жыл бұрын
You're welcome. Thanks for watching
@ABBAOPAXO 2 жыл бұрын
it was of great help, I was able to do the job, some issues cuz is a v6 but reading the comments helped me to solve that problem, thank you, you have a great community.
@themechanic6117 2 жыл бұрын
Thanks for watching. Unfortunately it's more difficult on the v6 models
@jamesnall569 4 жыл бұрын
The Malibu that he is working on is an 08-12 and a really good tutorial video.
@themechanic6117 4 жыл бұрын
Thank you
@dirkrosalez635 3 жыл бұрын
Great informative video...helped me out tremendously and made replacement quick n eazy
@themechanic6117 3 жыл бұрын
You're welcome.thanks for watching
@joecnc3341 Жыл бұрын
Liked-Subscribed-Notified - great job - thank you for posting the Torques!
@themechanic6117 Жыл бұрын
You're welcome. Thanks for watching
@BigDog50001 6 жыл бұрын
Excellent job Jonathan!
@themechanic6117 6 жыл бұрын
Thank you👍 this was a easy one.
@backyardbuilds12 2 ай бұрын
Amazing video
@themechanic6117 2 ай бұрын
Thank you
@robertmorris9101 3 жыл бұрын
Very good video. Im doing this tomorrow and wanted to refresh. Very good description and camera angles are well done!
@themechanic6117 3 жыл бұрын
Thank you
@danyoinfluence 5 жыл бұрын
Great video, I appreciate it helps me to take on the job with confidence.
@themechanic6117 5 жыл бұрын
Good luck and thanks for watching
@nevaehstar137 2 жыл бұрын
Thank you for being so thorough
@themechanic6117 2 жыл бұрын
You're welcome. Thanks for watching
@roberttumback1202 3 жыл бұрын
Great video! Quick and clear!
@themechanic6117 3 жыл бұрын
Thank you
@RedMottoMotto 5 жыл бұрын
06 Malibu maxx hatchback, 3.5l I had to remove both motor mounts, working 1 side at a time. Great video
@rrizz2050 3 жыл бұрын
great helpful video. Fastener sizes and all. Thanks
@themechanic6117 3 жыл бұрын
You're welcome
@patbarno1663 Жыл бұрын
Fantastic lesson and education thank you
@iftikharqureshi654 5 жыл бұрын
Excellent video
@themechanic6117 5 жыл бұрын
👍thanks
@littletommy16 5 жыл бұрын
Great video. Very clear and well explained.
@themechanic6117 5 жыл бұрын
Thank you
@littletommy16 5 жыл бұрын
@@themechanic6117 for real though ! Keep it up
@themechanic6117 5 жыл бұрын
I'm trying, thanks for the support! 👍💪
@CHIBA280CRV 3 жыл бұрын
Nice job 👍
@robertdeanda1961 Жыл бұрын
Very informative easy and understanding in how to DIY video man thanks and I absolutely appreciate this😉👍
@edwardmmanns7454 Жыл бұрын
Great video...don't like the music but I'm 75.
@themechanic6117 Жыл бұрын
The music was a poor choice. Sorry
@SteveRobReviews 6 жыл бұрын
Hammer love taps always work. 👍👍
@themechanic6117 6 жыл бұрын
Tap tap tap 👍
@thomasbergman442 5 жыл бұрын
Lol
@edgaravitia6783 5 жыл бұрын
Thank you it helped me out a lot 👍. Great job
@themechanic6117 5 жыл бұрын
Thanks for watching
@JuanRojas-ph8ol 3 жыл бұрын
Great video thanks for sharing..👍🏻👍🏻👍🏻👍🏻👍🏻
@themechanic6117 3 жыл бұрын
Thanks for watching
@WillCtheMechDrummer 3 жыл бұрын
Subscribed! Good content... Straight to the point!!!
@themechanic6117 3 жыл бұрын
Thank you
@mattleighton5289 3 жыл бұрын
Grate video. Thank you for the specs on torque. Matt 52
@themechanic6117 3 жыл бұрын
Thanks for watching
@Hector-qt5rn 5 жыл бұрын
Thank you for this video! I'm about to do both on my 2012 Malibu this wednesday.
@themechanic6117 5 жыл бұрын
Good luck 👍
@clout2k 4 жыл бұрын
How did this go for you. I'm looking to do this myself on a similar model to avoid a thousand dollar charge. I'd appreciate any tips you got. thanks!
@miguele.m4818 4 жыл бұрын
how did it go? I have the same car, and there is some black oil leaking underneaht my control arm and I wanna change it. was this video helpful for a 2012 Malibu?
@miguele.m4818 4 жыл бұрын
@@clout2k any luck with this video?
@Justin-hv7eu 2 жыл бұрын
Lol. If you had oil leaking I doubt that car is still going 2 years later.
@TheCowgirlNiamh 6 жыл бұрын
Great job as always! :)
@themechanic6117 6 жыл бұрын
Thanks! This was a easy one 😊
@chopa479 4 жыл бұрын
Best video out there for this replacement
@themechanic6117 4 жыл бұрын
Thank you
@chopa479 4 жыл бұрын
@@themechanic6117 do you have any suggestions if I need to replace both front tie rod ends and the control arms? Like what should I do first? And what are some important things to keep in mind?
@themechanic6117 4 жыл бұрын
@@chopa479 you can do them at different times if you wanted . they are two different parts of the car . keep in mind your car will need a wheel alignment after the tie rods or the control arms so id try to get it all done together so you just pay for an alignment once. If you wanted to start with one id start with the tie rods
@jameswilson4968 3 жыл бұрын
Thanks, very informative,
@terryashley4674 3 жыл бұрын
Great job! I'm going to do mine based on this video. I'll have the stabilizer links and bushings on hand. 👍🏽
@themechanic6117 3 жыл бұрын
Thank you for watching
@HardDriveBeatss 4 жыл бұрын
awesome video boss, helped me get an ide of what i need to do on my malibu.
@themechanic6117 4 жыл бұрын
Thanks for watching
@tommorgan2030 5 жыл бұрын
Nice job sir!!!!!!
@themechanic6117 5 жыл бұрын
Thank you
@jonjones1725 2 жыл бұрын
I really appreciate you thank you very much you helped the bunch buddy thank you
@themechanic6117 2 жыл бұрын
Glad the video helped you
@carl1948 4 жыл бұрын
Great video !! ...not sure that I needed the "disco" music, LOL.
@themechanic6117 4 жыл бұрын
Sorry about that. Thanks for watching
@autumnbernier5303 4 жыл бұрын
I liked the jams
@snoops310ytpc7 4 жыл бұрын
Great video bro helped out a lot thank you!!
@themechanic6117 4 жыл бұрын
You're welcome.thanks for watching
@geraldrutledge3680 5 жыл бұрын
Great video
@themechanic6117 5 жыл бұрын
Thank you
@mumfordify 5 жыл бұрын
Nice video very helpful
@themechanic6117 5 жыл бұрын
Thank you
@jordanchristensen6178 6 жыл бұрын
Great job man, about to do the same thing on my brother's car.
@themechanic6117 6 жыл бұрын
Good luck 👍
@tylerwhiteman2127 Жыл бұрын
Very helpful
@themechanic6117 Жыл бұрын
Thanks for watching
@mechanicauto9704 4 жыл бұрын
you make it look so easy
@themechanic6117 4 жыл бұрын
Its not too bad of a job
@carltonpierce2544 Жыл бұрын
Good job and helpfull
@themechanic6117 Жыл бұрын
Thanks for watching
@Js-rq9uj 5 жыл бұрын
great video!
@themechanic6117 5 жыл бұрын
Thank you 👍
@marvinwadedrummond9295 2 жыл бұрын
Thank's very helpful
@0206540 2 жыл бұрын
Thanks very helpful.
@themechanic6117 2 жыл бұрын
Thanks for watching
@125sm3 6 жыл бұрын
Good job dude !
@themechanic6117 6 жыл бұрын
Thanks!
@indioflechudo6221 5 жыл бұрын
very good video
@titogonzalez3119 6 жыл бұрын
Hooking it up for viewers thx a lot.. I've gotta fix this same issue on a buddy of mine
@themechanic6117 6 жыл бұрын
Should be pretty easy, good luck 👍
@marcusanthony8033 4 жыл бұрын
Thank you sir very much
@themechanic6117 4 жыл бұрын
You're welcome
@live_lifeor_dye8875 3 жыл бұрын
Thanks for this .
@themechanic6117 3 жыл бұрын
You're welcome
@BigRedGinger 5 жыл бұрын
I'm about to attempt this repair. Wish me luck lol it's cold, and snowy here
@themechanic6117 5 жыл бұрын
Good luck, you should be able to remove the control arm without taking off the link
@kenngo4607 6 жыл бұрын
Great video!
@themechanic6117 6 жыл бұрын
Thank you 👍
@kenngo4607 6 жыл бұрын
Do you know how much it cost to replace 2 front lower control arms and ball joints for a 2007 honda element if I've already have the parts? I'm in CO. I'm not sure where you are located, but I just throw it out there just in case we are in the same city :)
@themechanic6117 6 жыл бұрын
I'm in Chicago, sorry you'd have to call around to your local shops. Or find a neighborhood mechanic ,much like what I do .
@kenngo4607 6 жыл бұрын
Thanks! Yeah I would take it to your shop :)
@jackmeeksiii732 5 жыл бұрын
Good video man....
@themechanic6117 5 жыл бұрын
Thank you
@1000alb2 4 жыл бұрын
Very good video. 👍👍
@themechanic6117 4 жыл бұрын
Thank you
@jbustos93able 5 жыл бұрын
Good video
@themechanic6117 5 жыл бұрын
Thank you
@waimeaguyz9074 2 жыл бұрын
Thank you. Awesome work. I'm going to try and replace my control arm. Makes such an irritating noise.
@themechanic6117 2 жыл бұрын
Good luck
@rodrigomeca 5 жыл бұрын
Thank you, its the same process for the malibu 2011
@themechanic6117 5 жыл бұрын
Should be the same
@rrmech11 6 жыл бұрын
Good job
@themechanic6117 6 жыл бұрын
Thank you!
@kuulie5220 4 жыл бұрын
This is more than im willing to invest in 🤦🏾♂️
@2012YoutubeWasBetter 3 жыл бұрын
The alternative ball joint is one that youre supposed to be able to hammer out, without replacing the whole control arm. What they dont tell you, is that you have to book a plane to valhalla, and ask thor himself to borrow his hammer to get it done.
@cameeiwebb935 4 жыл бұрын
Great video ! I’ll be working on my 2008 chevy malibi tomorrow ! Got the tools &&- parts &&- i’m good to go ! Wish me luck ☺️☺️
@themechanic6117 4 жыл бұрын
Good luck 👍thanks for watching
@cameeiwebb935 4 жыл бұрын
The mech a nic i did it ☺️🙌🙌🙌 my baby run like a champ 😆🤞 my question is , the ball joint in the control arm , wont let me hammet it , it looks like it came in with a blue ring at the very end &&- its like the very far end &&- no need to hammer. Did i do it wrong? Is it gonna snap ?
@themechanic6117 4 жыл бұрын
Did you change just the ball joint or the whole arm?
@cameeiwebb935 4 жыл бұрын
The mech a nic the whole control arm
@themechanic6117 4 жыл бұрын
Did the new balljoint have a blue plastic cover on it? Did you take it off? Where you able to put the bolt in to hold the balljoint?
@EXOVCDS 6 жыл бұрын
Similar to a mazda3 setup we changed recently.
@joshuab464 5 жыл бұрын
About to do this on my Chevy cobalt 👍🏾
@themechanic6117 5 жыл бұрын
Pretty much the same process, you may not have to remove the end links 👍
@joshuab464 5 жыл бұрын
Doing it today, I’ll come back with an update! Thanks for all the time you put in the video Brotherrrr
@matthewmorriso 5 жыл бұрын
How long do you estimate this job to be for the average DIYer?
@stevenash1647 4 жыл бұрын
did same job on my 2007 Malibu v6 but the rear bushing bolt always comes loose. I see in your vid you didn't tighten loosen it at all. whats the official word on specs?
@marccozza2863 2 жыл бұрын
Very good im going to watch this step by step doing mine !! thanks
@matthewwittjr3025 5 жыл бұрын
So how much did all the parts together cost
@johnmarston9001 Жыл бұрын
I'm looking for the bolt with the captive nut as I need a replacement one. Do you know the name of the bolt and specs of it so I can get the right one? Car is an 05 V6 LT
@joonsocaliharris9816 3 жыл бұрын
Would this be the reason why I here a cracking sound when I pull off sometimes in my chevy Malibu 2010 I hit a pt hole kids hard and every since I been hearing a lil weird cracking sound when I take off
@themechanic6117 3 жыл бұрын
It could be this but there are many potential things that could cause that noise
@JuanMorales-ks4ll 2 жыл бұрын
what brand arm did you use
@themechanic6117 2 жыл бұрын
I can't remember. I might of gotten it from rockauto.
@ososcribww 2 жыл бұрын
Thats super cool how your straight to the point
@themechanic6117 2 жыл бұрын
Thank you for the comment
@williammarker3388 2 жыл бұрын
We're you get that torque settings tool the one that was beeping
@themechanic6117 2 жыл бұрын
Amazon or ebay. ACdelco torque box
@williammarker3388 2 жыл бұрын
@@themechanic6117 thank you your video was helpfuf
@lobbros6324 10 ай бұрын
Does anyone know what socket is that for the air gun?
@ricvanwinkle1665 5 жыл бұрын
Now I know why your called the Mechanic. Excellent video thanks Brother
@themechanic6117 5 жыл бұрын
Thanks you. Thanks for watching and leaving a comment 👍
@B-S1999 2 жыл бұрын
When u load the suspension should the control arm be level
@themechanic6117 2 жыл бұрын
Try to get the control arm to where it normally would sit. In most cases that is level
@kluwe801 5 жыл бұрын
Hey bro I hit a curb last night after skidding off the road. In a bad snow storm, my wheel got pushed back 1-2 inches to the fender. Would my lower control arm be bent?
@themechanic6117 5 жыл бұрын
There's a few things that could be damaged...
@yhani2realtv521 4 жыл бұрын
When i turn or take off from a stop sign i got my cv axial and control arm fixed afrter i hit a curb but now its making a sound when u Turn or pull off? Help
@themechanic6117 4 жыл бұрын
It needs to get inspected by a mechanic. Its impossible to say what's wrong with your car over the internet
@twosnaps4124 5 жыл бұрын
My tire keeps wearing down real close to the rim? Would changing the lower control arm fix that?
@themechanic6117 5 жыл бұрын
Are the bushings or balljoint on the control arm worn out ?
@twosnaps4124 5 жыл бұрын
Im sure they are i was told when getting new rims and tires i needed new lower control arms but i havent looked myself yet i plan on looking today. Everytime i replace a tire it blows out and its always real close to the rim where the slash looking marks are but its all around. Tried getting new rims hoping that'd fix it but its starting to wear those new tires out now too.
@themechanic6117 5 жыл бұрын
Oh ok, then yes a control arm can cause uneven tire wear. Inspect other times as well. Then you'll need a,wheel alignment afterwards. I'll link a video of mine so you can get a better understanding of the situation
@themechanic6117 5 жыл бұрын
kzfaq.info/get/bejne/f9l3gNN2ydere5s.html
@twosnaps4124 5 жыл бұрын
The mech a nic ok thanks so much you're more of a help than the shops I've been to just trying to get money for things i don't necessarily need to fix my problem
@vincephan344 5 жыл бұрын
Is this a 4cyl mondel? The V6 one i did today sucked ass, the engine is blocking that single bolt that goes across, you have to remove the engine mount and jack the engine up to get the bolt to slide out. It's not wide open like this one.
@themechanic6117 5 жыл бұрын
Yes this is the 4cyl model. That sucks, I've been there before.
@LEONDELASIERRA1 4 жыл бұрын
Thankkkkkkkkkk youuuuuuuuu
@themechanic6117 4 жыл бұрын
You're welcome
@LEONDELASIERRA1 4 жыл бұрын
Can you exceed 37 pounds of torque on the back bolts?
@themechanic6117 4 жыл бұрын
Sure but dont get crazy with how much you torque them
@LEONDELASIERRA1 4 жыл бұрын
Sir can the old bolts be used on the new ball joints? Or where can I get a new pair?
@themechanic6117 4 жыл бұрын
You can reuse the bolts
@alexandertocco6687 3 жыл бұрын
How important is the ft lbs thing when tightening all the bolts? Like should I invest in one of them fancy torque measuring doo-dads? I'm a novice and I just bought all the parts for my suspension/steering stuff and was gonna replace em instead of paying the price of a new car to have someone else do it. But this is the second vid I've watched that's mentioned that so I'm kinda worried about it now lol
@themechanic6117 3 жыл бұрын
Id always recommend using a torque wrench torque. A standard click style wrench is pretty affordable. Even buying a wrench you're still saving a pretty penny
@eugenew6717 5 жыл бұрын
Didn't need to mess with the links unless there bad,,just loosen the bolt on the new arm pull ball joint end out first,,it rotates down,passes the sway bar,pulls right out👍
@themechanic6117 5 жыл бұрын
I found that yes you can get away with pulling the old one out but the new one has new stiff bushings.its easier to just disconnect the links
@eugenew6717 5 жыл бұрын
Did you use new pinch bolt?
@themechanic6117 5 жыл бұрын
Yes I did. There was a new one supplied with the control arm
@eugenew6717 5 жыл бұрын
@@themechanic6117 looking to buy on Amazon..Moog,,acdelco,,,dorman,,all don't say
@themechanic6117 5 жыл бұрын
You can re use the pinch bolt. I just used a new one because it was available..
@Darkasknightfall 3 жыл бұрын
“All that social media garbage!” 😂
@themechanic6117 3 жыл бұрын
😂👍
@deandoss2105 3 жыл бұрын
In my 07 Malibu maxx I was taking kind of a tight turn. All of the sudden it was as if both tires on the side that was taking the inertia and momentum, suddenly lost almost all air and the car started sliding out abit. As if on Ice or wet pavement but wasn’t at all. The tires did not slide it was as if the body of the car or suspension idk hard to describe but there it is lol ? Would highly appreciate any suggestions thanks ahead of time y’all 🙏✌️🇺🇸
@larryisaac8988 4 жыл бұрын
Is it the same way for a 2009 Malibu?
@themechanic6117 4 жыл бұрын
More or less it should be the same
@thomasdotta6554 4 жыл бұрын
I cant get my baljoint to go back in on my drivers side. Any one have the same issue? If so how did you fix that and get it back in
@themechanic6117 4 жыл бұрын
Its bolted to the subframe already?
@thomasdotta6554 4 жыл бұрын
@@themechanic6117 I had gotten. It it was just a strange angle
@jayryan7473 5 жыл бұрын
I have a 2006 V6 G6 GT. Be aware the Napa driver side which is left control arm 260 - 5873 and the passenger side come with the wrong pinch bolt. It is too big. AutoZone will sell you the control arm but they do not have a pinch bolt! ALWAYS ALWAYS BRING THE OLD PARTS WITH YOU & CHECK YOUR PART'S AND BEFORE YOU LEAVE THE STORE. I was just at O'Reilly and they sold me the control arm for the wrong side. The box was correct however the part inside the unopened bag is not labeled. O'Reilly associates are very helpful but the company itself is setting itself up for failure No wonder people would rather order online.
@dustinvanleuven6801 3 жыл бұрын
What happen if the cv staff come off
@themechanic6117 3 жыл бұрын
Try to push it back in. It should pop in...hopefully
@williammize8270 2 жыл бұрын
Do you do any mechanic work in Arkansas? 🤪🙄😵😩🤔
@themechanic6117 2 жыл бұрын
Sorry I don't. I'm in Illinois
@andrewsisty0 5 жыл бұрын
Gr8 video and very helpful! Just out of curiosity what part is that, that you used floor Jack to lift the car and why not frame? Thank you in advance!
@diymisfit_Mechanic_UDX404 6 жыл бұрын
I agree with penetrating oil. Unless you spray it daily for a week. Whenever you take nut off, it is still dry on the threads, you can see that the penetration never happened. It takes days for seepage to happen.
@themechanic6117 6 жыл бұрын
Exactly, once it's moving it helps but to penetrate on something that's tight.... Good luck! Lol thanks for watching and commenting
@jayryan7473 5 жыл бұрын
Misfit: Hmmm somehow you know how penetrating oil has worked for everyone that's ever used it...you must be the most amazing person you know.
@thomasbergman442 5 жыл бұрын
Unsure of what your using, but Liquid Wrench penetrating oil works in just minutes. Seriously.
@thomasbergman442 5 жыл бұрын
Liquid Wrench Penetrating Oil works in minutes. No doughting me, just Trust.
@boryyork9430 5 жыл бұрын
Do you think is the same process for chevy malibu 2010? By the way great video
@themechanic6117 5 жыл бұрын
More or less yes it should be the same process and might even look the same.
@boryyork9430 5 жыл бұрын
Thank you so much ,I'll do it thus weekend and I let you know,by the way I check on amazon and they sell the all set,2 lower control arm,2 stabilizer bars,2 and the springs ,sorry my english not perfect ,but do you think is to hard to do it by my self or should I take it to the mechanic
@boryyork9430 5 жыл бұрын
www.amazon.com/Detroit-Axle-Complete-12-Piece-Suspension/dp/B01AFLNDRA/ref=pd_gwm_simh_0?pf_rd_s=grid-21&pf_rd_t=Gateway&pf_rd_i=mobile&pf_rd_m=ATVPDKIKX0DER&pd_rd_wg=MwtUs&pd_rd_r=C6WYTX6YERHRDG596G26&pd_rd_w=LFCal&pf_rd_r=B6VGXC34S74Y3Q5TPSJN&pf_rd_p=67fcedea-c2b1-4f42-b770-872faf99e6aa&pd_rd_i=B01AFLNDRA#
@themechanic6117 5 жыл бұрын
Do you have the correct tools to do the job?
@themechanic6117 5 жыл бұрын
I have another video on changing the struts, look for that video if you plan on doing it.
@nevaehstar137 2 жыл бұрын
Oh yes I forgot to mention I have a 2010 Chevy Malibu this will work for it too right
@themechanic6117 2 жыл бұрын
As long as yours has the 4 cylinder engine it should be the same
@sirsweetness8332 5 жыл бұрын
How do you find these no maintenance vehicle owners? I would be a nervous wreck driving many of these cars you deal with
@themechanic6117 5 жыл бұрын
I guess its the area i live in. Either people dont have the money to fix things or they just dont care to fix their cars.
@sirsweetness8332 5 жыл бұрын
The mech a nic I am on my maintenance so much that you could use my old parts and those owners would think you put new parts on.
@phillipoiibradley4661 5 жыл бұрын
This video is basically the same procedure for the 2012 Cruze.
@dominicksan09 4 жыл бұрын
What model is the Malibu?
@themechanic6117 4 жыл бұрын
Im not sure.sorry
@dominicksan09 4 жыл бұрын
Thanks man! I’m doing mine today and it’s 05 and a V6 they say the transmission mount has to be removed in order to change
@themechanic6117 4 жыл бұрын
@@dominicksan09 this malibu had the 4cly engine it . i have heard that the mount needs to be removed on v6 models
@edwardmmanns7454 Жыл бұрын
Great job, thanks...but I didn't care for the music ,lol, although it wasn't too loud.
@themechanic6117 Жыл бұрын
Sorry about the music but thanks for watching
@edwardmmanns7454 Жыл бұрын
Sorry, didn't notice I had watched this before and commented.
@mikecortez2967 4 жыл бұрын
Why do u have to get the car a alignment right away
@themechanic6117 4 жыл бұрын
If the alignment is off it wil effect your handling and wear out the tires faster
Daring Motors
Рет қаралды 6 МЛН
Big Al Hoffman Vlogs
Рет қаралды 13 М.
IBRAHIM ENGINEERING WORKS
Рет қаралды 3,1 МЛН