1/4 SCALE V8 Engine Gets TUBULAR Exhaust System!

Рет қаралды 460,083

Жыл бұрын

Get the engine here➜ bit.ly/3YpMnfB
Exhaust System➜ tinyurl.com/3ufpe6m4
Other V8 engines ➜ bit.ly/3ErAduy
Stirlingkit Flash Deals ➜ bit.ly/3IafXig
---------------------------------------------------------------
ENJOMOR GS-V8 Engine Specifications:
Displacement: 78cc
Four-stroke
Bore: 22.9mm
Stroke: 20.00mm
DOHC
Maximum RPM: 9000rpm
Maximum Power: 3.8kw
Water cooled
Independent Lubrication (Oil Pump)
Electric Starter (Brushless Motor)
Electronic Ignition with Distributor
Spark Plug Type: ME8 with 1/4-32 Thread
Ignition Voltage: 10-12V
Starting Power: 24-48V Battery (I used 4s battery 14.8V)
Fuel: 95# Gasoline
Oil: 20W and above, Oil Volume: 50ml
Dimensions: 13.6 x 17.9 x 13.8cm
Weight: 4500g
-----------------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90

Пікірлер: 579

@o0julek0o Жыл бұрын

Now it sounds like a full sized engine, I swear.

@lawnmowerdude Жыл бұрын

You can get the sound of a full size engine by carefully timed popping sounds too.

@dyllanneedham2087 Жыл бұрын

Imagine how it would sound with individual throttle bodies

@isminivermekistemeyenmahmut Жыл бұрын

You can get a full sized engine sound by placing pet water bottle inbetween bike fender and tire

@rokas8594 Жыл бұрын

lucky not a fully seized engine

@Arfadm0004 Жыл бұрын

@@dyllanneedham2087 Imagine how it would sound with superchargers

@squeezle100 Жыл бұрын

Now we need a video of a gearbox being made for that v8

@dave161141 Жыл бұрын

Sounds like home-brew torque converter :D

@fry.master Жыл бұрын

Bolt it to a geo metro transmission

@brodrea7664 Жыл бұрын

@@fry.master lmao

@Christopher26021994 11 ай бұрын

I thought the same haha!

@Gkitchens1 11 ай бұрын

Belt drive pulls on the back with a 90 into a clutch and a cvt to the rear axle you got yourself a one of a kind go kart engine that lrobsvly breaks down a lot lol

@gvii Жыл бұрын

Boy, that thing has been a real pain to get up and running properly. But holy heck, does it sound fantastic now that you have it running right! I could just sit and listen to that thing run and be perfectly happy, lol.... Good to hear that the motor didn't get cooked when the water and oil pump wasn't running. Can't wait to see what you end up doing with it once you get all the bugs worked out.

@fightuntil996 Жыл бұрын

The sound with the new muffler/exhaust is amazing.

@RANnewlife Жыл бұрын

That growl from such a small engine. Soo satisfying

@Matt_Deluca Жыл бұрын

Although I think it's neat that such an engine is available, there seems to be a lot of engineering fails with it out of the box. Perfect content for you! But I'd be upset if I bought one of these and had this many problems. Sounds great with the new headers though! Nice job

@jackradzelovage6961 Жыл бұрын

its chinese made. they dont care if it works :/

@heckin_dinosaw Жыл бұрын

I believe the reason for slot of these fails is that these kits are usually sold to be a display piece, that can be capable of running, not as an actual motor designed to run, this why so much stuff usually has to be redesigned for it to run reliably, but I agree, for the price of it they should be designed much better

@2Skinny Жыл бұрын

Especially since you can build an LS from junkyard parts for how much this thing costs.

@paradiselost9946 Жыл бұрын

if i bought a conley precision, and had these problems from the box... id track them down atnd throw it at them. but for about 1/4 the price, one can expect dodgy crap from china.

@heckin_dinosaw Жыл бұрын

@@paradiselost9946 what ever happened to Conley? I know they had a building fire but did they ever recover from that?

@tylerpoore97 11 ай бұрын

Bro. You are killing it. Been following you for YEARS because of literally no one else putting in the effort(actually having the tools to do so as well) to make these crappy toy engines/models actually run. Massive props and congrats on the subscriber boost lately!

@bluespidergaming7719 11 ай бұрын

im trying to give me some credit engineering is hard

@tiporari Жыл бұрын

Exhaust length and presence of crossover such as H or X pipe have a big effect on sound. It would be an amazing thing to experiment with tuning the exhaust to get different tones from the engine.

@MiGujack3 11 ай бұрын

8 to 1

@matthewmondragon2074 11 ай бұрын

Could be, however the important part is trhowing away the gases to the the cylinders more cleaner, if we focused much into the sound some of the gas could be still stuck and mess the combustion, thats why most of perfomance/racing exaust pipes have bigger diameter, and the sound? Well is secondary. Could be great if its try replic or make similar to the Ford GT40's exaust type, to start it simple.

@exoticcreature3059 7 ай бұрын

I don't doubt that sir but the H and X pipe less effect on sound that's you think due to the fact that the header primary length is fixed in the and so is the engines firing interval. Those two factors didctate sound the most. H and X pipes are mostly for scavenging and balancing pressure differential of the exhaust between both cylinder banks. Messing with the header primary lengths, such as using unequal length headers, will have more impact on sound because you change the timing at which the exhaust pulses from the cylinders meet each other, and whether they collide or not. 180 degree headers would be a prime example of this.

@MaNNeRz91 Жыл бұрын

Please make a miniature supercharger for this 😍😍

@paradiselost9946 Жыл бұрын

what, yet another centrifugal charger that cant possibly work?

@51OWI Жыл бұрын

Agree, would look sick with a blower on top 👌

@MaNNeRz91 Жыл бұрын

@@paradiselost9946 it could work. At least for charger noise. He's getting more and more precise with his machining and designing. He could make it happen.

@CreakingJordans Жыл бұрын

The return of the machining ASMR king...

@Calebt1981 11 ай бұрын

A V8 sounds great no matter the size. This is amazing!

@OldCurmudgeon3DP Жыл бұрын

Trick dad used to tune the collector length (1/4mi drag race) ... Make a crayon mark down the pipe, go make a pass down the lane, cut the pipe off where the crayon burned off.

@0rphros Жыл бұрын

Gotta upgrade from the double boggalator and get a 4 barrel for that beast

@BigMountainCustomRC 9 ай бұрын

The fact that the "chainsaw" sound is gone makes it so much better. The headers definitely made it sound better. But the proof is in a possible "dyno" pull.

@NOTTApro142 Жыл бұрын

I bet with the better flowing exhausts it’ll run much better. But if you make multiple of different header diameters you can adjust how much torque, or how much power you want. That’s what they do in Indycar, and almost everything!

@captainslow2883 Жыл бұрын

A rev limiter would be pretty cool to see on a small engine like this

@wesleybarton8854 Жыл бұрын

Well alrighty then. I think I'm in love. That sounds fantastic! Love the headers and muffler combo. Looks fantastic and sounds even better. Would like to see you put it on your dyno set up and see how it preforms under a load. I am glad it is ok after the oil pump and water pump quit. Looking forward to seeing what you have planned next for this engine.

@kandd2591 11 ай бұрын

This channel is what got me into machining and making parts, I am still not very good at it and it was expensive to start out but it it really fun and I am glad I found this channel. Thank you

@ArmiYT Жыл бұрын

These videos are amazing! Can’t wait to see what you have planned for this monster.

@davidreynolds8551 11 ай бұрын

Love the time and thought that you put into modifying the engine to make it work better. It now sounds a lot better and much more throaty than before. Look forward to see what other modifications you make to get it really humming.

@petercasper224 Жыл бұрын

Another fantastic update! This is starting to sound really good!

@jimsauer2453 Жыл бұрын

Nice work man, I love your builds.

@MrMoparbob498 11 ай бұрын

That's really cool man - headers made big improvement & sounded excellent

@markspain2219 11 ай бұрын

That thing rips, could listen to that revving all day!!

@markspain2219 11 ай бұрын

Thats awesome!!! What should I do?

@quinnobi42 Жыл бұрын

That thing sounds sick! It surprised me how much the mufflers did, I kind of expected that they wouldn't make much difference.

@cristopherdelgado3904 11 ай бұрын

That's why i love headers! 😍 They transform any engine sound into a musical beast! 🤙

@SmokingMan26 Жыл бұрын

Saw the short of this engine and was waiting for this. sounds so damn good.

@SmokingMan26 11 ай бұрын

No thanks account made Yesterday to scam people

@menom7 Жыл бұрын

Great to see your back! I missed watching your videos for awhile! : >)

@scottmeyer5900 Жыл бұрын

That sounds like a proper V8. Well done!

@Music7Ada 11 ай бұрын

Such a nostalgic sound! Sounds just like the Monster Jams I would go to as a kid

@doconyoutube2365 Жыл бұрын

Wow wow wow It's honour to watch your videos free of cost What a machine you made and what a sound Hats off to you 💯✅🥂

@Watchyn_Yarwood 11 ай бұрын

Amazing transformation! Sounds great!

@jdmlordsalamander6397 Жыл бұрын

Absolutely amazing ...your work is high end!!!! Keeo it up!

@HootiusMaximus Жыл бұрын

Wonder how much difference individual throttle bodies would make

@Gavs_rc_hobbies Жыл бұрын

Runs so much smoother after those small changes.

@NoobAlike Жыл бұрын

sounds amazingly smooth

@SilRaZeR Жыл бұрын

Amazing ! Holy Moly , Thank you for this Awesome Video !

@BikerDaddy22RideorDie Жыл бұрын

This is the exact thing I dreamt of when I was a kid I wanted one of these on all my trucks and cars!!

@VisableYT 11 ай бұрын

I love how it sounds when it cranks

@TranceFur 11 ай бұрын

Love the sound of the new exhaust. Before, it sounded like a hot rod someone built in their shed. Now it sounds like a well-engineered machine.

@thaphreak Жыл бұрын

You zoomed on that belt and heart dropped, "oh fuck" lol. Glad it's fine!

@BSamancioglu 11 ай бұрын

Very nice engine sound, congrats

@rjung_ch Жыл бұрын

👍💪✌ Glad it didn't get damaged. Can't wait to hear it reach the 9000rpm.

@rickkubbenga5904 Жыл бұрын

Amazing sound!!! Insane

@kim-zg3hv 11 ай бұрын

that was a smooth start

@sameregarde 11 ай бұрын

nice smoooth running v8 thank you for sharing your content

@thomasleonard8550 Жыл бұрын

Always a great day when we get a new vid

@grzegorzdobrosielski6201 11 ай бұрын

this is the best sounding rc car motor i ever heard

@DaLoveDonkey69420 Жыл бұрын

After binging the series, been waiting for this notification!

@gearbanger57 Жыл бұрын

Very impressive. True craftsman,

@ihaveanunorigionalname Жыл бұрын

Bravo that was spectacular!!!!!

@infernoking7504 Жыл бұрын

That exhaust is cool.

@IzEDraGoN Жыл бұрын

That engine sound though..... 10/10 ❤❤😨😨

@andiiii72 11 ай бұрын

With the new exhaust the engine sounds much better. 👍

@prothomasgaming Жыл бұрын

Nice, you should make a video in which you explain all machines and tools you use.

@matthew-gn4qd 10 ай бұрын

nice one. i need one of these on like a key ring or something so i could rev it up when im waiting for a bus and stuff like that. or just in the mornings to help me get up. i love it! its so cool 😄

@seanmiller1275 11 ай бұрын

You deserve a whole lot more renown for your work.

@corporaljohnson8318 9 ай бұрын

Night and day improvement!

@johannesletsoalo1711 11 ай бұрын

The sound of the new exhaust system is 👌👌👌 Sounds like a mini old Mustang GT engine

@napadan 11 ай бұрын

What a dedicated 👏 that sound v8 really pay off.

@nathawatudkanta4318 Жыл бұрын

The sound is amazing ❤

@nkosinathisimphiwe850 11 ай бұрын

Sounds fantastic 👌🔥🔥🔥

@MrGuga84 Жыл бұрын

much better with the mufflers hehe congrats, nice sound.

@nigelbarradell2265 10 ай бұрын

SOUNDS GREAT WITH THE NEW PIPES

@davidsnyder2000 Жыл бұрын

Love the new exhaust system 👍🙂

@alexanderberte2650 Жыл бұрын

Ok that little motor has no business sounding so good!

@Anvarynn 11 ай бұрын

A couple things I love It's quarter scale but sounds full sized That muffler actually added throat to the note

@camyota Жыл бұрын

The first time ive heard one of these things actually run and sound right!

@stevemorris8545 11 ай бұрын

Sounds great!

@bamboosho0t Жыл бұрын

Sounds insane! 👍

@lawofliberty3517 Жыл бұрын

Do 8 into 1 collector. That would sound insane.

@bobbyrector2879 Жыл бұрын

I love watching your video's it's cool that you make your on parts for your RC YOU CAN make about anything you want to now you need to build you a RC car to put it in nice work.

@shawnmrfixitlee6478 Жыл бұрын

great upgrades , sounds like a million bucks !

@alekseyguida8070 11 ай бұрын

This is a Great Job!

@microbuilder Жыл бұрын

The most adorable little growl, sounds awesome lol

@5.9manualzj 11 ай бұрын

it sounds perfect! that little idle is just too cool. time for a little X pipe or something

@Outlawlife1010 Жыл бұрын

Sounds like 2 and 6 are running lean. Thats the studder at about 2300rpm and the boggy 2 step after throttle release over 2300. Have a built lt1 that did the same thing. Lil port and polish and new rings fixed her up though. Bad little motor though. Sounds tuff!

@marcelplchEng Жыл бұрын

This is incredible

@asterix3674 11 ай бұрын

Imagine if you make a 8 to 1 exhaust, that would sound magnificent!

@BrainyThyme3869 3 ай бұрын

That thing sounds like a 350 SBC, impressive!

@dojadelassus3181 Жыл бұрын

It sounds so good

@mattyice1950 Жыл бұрын

Incredibly Impressive!!

@tenminutetokyo2643 11 ай бұрын

That is nuts!

@AsvinThakur391 11 ай бұрын

We want to see a v8 powered rc truuck project next! I hope you give a thought to it and would start the project ! Awesome video!🤩🤩

@jordanplatt4860 11 ай бұрын

Damn!!! Sounds awesome tho that thing is badass!

@kpdubbs7117 Жыл бұрын

5:27 That sound is just perfect!

@jeffersonbarbosa7008 11 ай бұрын

Som do motor crossplane é top demais!!

@Project337 11 ай бұрын

I'm trying to imagine a sequential F1 style exhaust on this thing, it would probably sound obscene. Great work Johnny! BTW I see an opportunity to add your own valve cover nameplates... Make it YOURS!