1.6 THP intercooler upgrade 🔧🛠⚠😎😍

Рет қаралды 20,671

Күн бұрын

1.6 THP - Seat Ibiza Cupra Intercooler upgrade.
For the Peugeot 3008 there are no complete intercooler set available, like Airtec and Forge have for the 207 and 208. Customizing everything saves a lot of money (compared with the complete sets available on the market).
🆂🆄🅱🆂🅲🆁🅸🅱🅴 to this channel and press the 🔔 icon to get new video updates❗
kzfaq.info?s...
The Seat Ibiza III Cupra intercooler is twice as big as the stock 1.6 THP intercooler (1440H9). It should be able to cool down the air better than the original intercooler and by doing so gaining some extra power.
I will later on record the inlet air temperature of this setup and of a stock 1.6 THP to measure the difference.
Original Equipment Number: 6LL145804
PSA replacement part: 1440H9
Nissens Seat Ibiza III Cupra intercooler specs:
Core dimensions: 369 x 367 x 56mm
Total size: 537 x 367 x 56mm
In and outlet diameter: 60mm
The actions shown in this video are (should be) in basic the same for all cars with the 1.6 Prince engine (1.6 THP/Puretech/N13/N14/N18).
For example:
Citroën DS3, DS3R, DS3 racing, C3, C4, C5, DS5. Engine codes: EP6DT, EP6DTS, EP6CDT, EP6CDTM, EP6CDTX, EP6FDT, EP6FDTX.
Peugeot 207 RC, 207 GT, 207 GTi, 207 Le Mans, 208 XY, 208 GTi, 208 GTi BPS, 308 GT, 308 GTi, 3008 GT, 5008 GT, RCZ. Engine codes: EP6DT, EP6DTS, EP6CDT, EP6CDTM, EP6CDTX, EP6FDT, EP6FDTX, EP6FDTR, EP6CDTR.
Mini R55, R56, R57, R58, R59 - Cooper / Clubman / Countryman / Coupe / Cabriolet - S & JCW models. Engine codes: N14B16A, N14B16C, N18B16A, N18B16C.
BMW 1-series (F20) 114i, 116i, 118i, 120i, 3 series (F30) 316i, 320i ED. The BMW N13 engine divers most from the other Prince 1.6 engines.
If you have any content to share, please contact us at "content @ thptuning.com".
1.6 THP - Mise à niveau du refroidisseur intermédiaire Seat Ibiza Cupra.
Il n'y a pas de jeu complet d'intercooler disponible pour la Peugeot 3008, comme Airtec et Forge l'ont fait pour les 207 et 208. Tout régler permet d'économiser beaucoup d'argent (par rapport aux jeux complets disponibles sur le marché).
Le refroidisseur intermédiaire Seat Ibiza III Cupra est deux fois plus grand que le refroidisseur intermédiaire 1,6 THP standard (1440H9). Il devrait être capable de refroidir l'air mieux que le refroidisseur intermédiaire d'origine et gagner un peu de puissance supplémentaire.
J'enregistrerai plus tard la température de l'air d'admission à partir de cette configuration et d'un stock de 1,6 THP pour mesurer la différence.
Numéro d'équipement d'origine: 6LL145804
Pièce de rechange PSA: 1440H9
Spécifications de l'échangeur Nissens Seat Ibiza III Cupra:
Dimensions du noyau: 369 x 367 x 56 mm
Dimensions hors tout: 537 x 367 x 56 mm
Diamètre d'entrée et de sortie: 60 mm
Si vous avez du contenu à partager, veuillez nous contacter à "content @ thptuning.com".
Les actions montrées dans cette vidéo sont (devraient être) à la base les mêmes pour toutes les voitures avec le moteur 1.6 Prince (1.6 THP/Puretech/N13/N14/N18).
Par exemple:
Citroën DS3, DS3R, DS3 racing, C3, C4, C5, DS5. Codes moteur: EP6DT, EP6DTS, EP6CDT, EP6CDTM, EP6CDTX, EP6FDT, EP6FDTX.
Peugeot 207 RC, 207 GT, 207 GTi, 207 Le Mans, 208 XY, 208 GTi, 208 GTi BPS, 308 GT, 308 GTi, 3008 GT, 5008 GT, RCZ. Codes moteur: EP6DT, EP6DTS, EP6CDT, EP6CDTM, EP6CDTX, EP6FDT, EP6FDTX, EP6FDTR, EP6CDTR.
Mini R55, R56, R57, R58, R59 - Cooper / Clubman / Countryman / Coupe / Cabriolet - modèles S & JCW. Codes moteur: N14B16A, N14B16C, N18B16A, N18B16C.
BMW 1-series (F20) 114i, 116i, 118i, 120i, 3 series (F30) 316i, 320i ED. Le moteur BMW N13 est le plus différent des autres moteurs Prince 1.6.
0:00 Introductie
0:01 1.6 THP intercooler upgrade
0:08 Remove the front bumper
0:20 Remove the stock intercooler
0:41 Stock vs Seat Ibiza Cupra intercooler
1:27 Adjusting the gap for the intercooler inlet pipe
2:17 Welding the custom mounting brackets
3:51 Temporary intercooler setup
4:01 Top: inlet intercooler
4:09 Shortening the intercooler pipes
4:35 Bottom: outlet intercooler
5:14 Template made from cardboard
5:21 Drill holes for the bracket mounting points
5:46 Fully fitted but without the cover plate
6:11 Cover plate finished and mounted
8:32 The end result after installing the front bumper
🆂🆄🅱🆂🅲🆁🅸🅱🅴 sur cette chaîne et appuyez sur l'icône 🔔 pour obtenir de nouvelles mises à jour vidéo❗
kzfaq.info?s...
🆂🆄🅱🆂🅲🆁🅸🅱🅴 para este canal e pressione o ícone 🔔 para obter novas atualizações de vídeo❗
kzfaq.info?s...
#thptuning #maintainance #turbo #tuning #subscribe #like #youtube #peugeot #citroen #mini #bmw #thp #n14 #n18 #207 #207gti #207rc #207lemans #208 #208gti #208bps #308 #308bps #308gti #ds3 #ds4 #ds5 #3008 #5008 #rcz #tuning #cartuning #instagram #instacars #exhaust #manifold #downpipe

Пікірлер: 42

@Opel_Corsa_F_1.5_stage_3 Жыл бұрын

I mounted the same intercooler on my new Opel Corsa F 1.5 Diesel with psa engine. The tests scored 173hp in stage 3 with increased original turbine and pressure at 1.85 bar.

@yhshah21 Жыл бұрын

Thank you for such an in-depth video into this.

@THPTuning Жыл бұрын

Many thanks for your compliment

@207-RC-Lemans 3 жыл бұрын

Nice selection of Seat Ibiza cupra intercooler. Clean application and workmanship..

@THPTuning 3 жыл бұрын

Thanks for the compliment!

@hgoko-go5m Жыл бұрын

Not good idea for engine coolant, you blocked the path way on the main radiator and with hard acceleration the engine will heat up affecting all the engine bay and turbo coolant line to cool faster , i would never risk with my ep6 for a bigger intercooler.

@gtpvlog8685 2 жыл бұрын

amazing

@THPTuning Жыл бұрын

Thanks for the compliment!

@ArthropodaPL Ай бұрын

Hi, are you remaping after install new bigger intercooler??? :)

@PatrykosLitwa508 8 ай бұрын

Hello @THPTuning , will this modification also fit the Peugeot 508 1.6thp from 2012, without any collision with the radiator?

@stompzero8941 3 жыл бұрын

Very interesting video! Can you tell me the problems of this 1.6 THP engine? I read a lot about some engine or especially timing chain problems?

@THPTuning 2 жыл бұрын

Timing chain and carbon on the inlet valves are perhaps the most common issues for the THP/N14/N18 engines.

@mushy1983123 Ай бұрын

Hows the car running with this intercooler set-up does engine temps get high due to lack of air to the radiator

@piasek2005 Жыл бұрын

my dears, is it possible to mount a turbo from the THP engine to the VTI engine? Are all engine accessories plug & play?

@JSB-IZ-ME 2 жыл бұрын

Do you guys have any affiliated garages in the UK? I have been looking for someone to upgrade a 2012 Peugeot 308 THP 200 but as yet been unsuccessful finding anyone who can provide this service. Thanks.

@yhshah21 Жыл бұрын

Hi what size pipes did you use?

@julienderand4998 Жыл бұрын

Possible d’avoir les dimensions des durite svp??

@thomastrydal981 2 жыл бұрын

Hi THP tuning. Did you do the intake temperature comparison? I have a 308 SW GT with the DTS engine version. Greetings from Denmark 🇩🇰

@THPTuning 2 жыл бұрын

No, haven't done that yet. Still need to do it, though will compare with a stock Citroen C5 1.6 THP.

@santiredondo8229 3 жыл бұрын

Hi THP tuning, one question this aluminium hoses for turbo and IC are custom make? or from airtec?

@THPTuning 3 жыл бұрын

All custom made.

@damian5563 3 жыл бұрын

Did you find some oil in intercooler? Im thinking about take it out to check oil inside. My turbo is a little "sweating" with oil.

@THPTuning 3 жыл бұрын

yes, oil was present in the original intercooler.

@damian5563 3 жыл бұрын

@@THPTuning Thank you for fast reply. Now I definitely take it out and check.

@mathewjones6223 Жыл бұрын

Intercoolers are hard to get in Australia. What size is it so I can try source something?

@THPTuning Жыл бұрын

Netlength [mm]:369 Netwidth [mm]:367 Netdepth [mm]:56

@MrReicrem 3 жыл бұрын

Do you have some lag from the turbo with this big intercooler ?

@THPTuning 3 жыл бұрын

No lag from the bigger intercooler.

@tasiokordeilof 3 жыл бұрын

can you write to me the centimeters of the basis you made? how many centimeters is before the curve?

@djallaltouenti379 3 жыл бұрын

Hi. is it compatible with Peugeot 208gti 208 hp

@Boboloization 3 жыл бұрын

It can be fitted on 208 gti, but there is much less space between radiators and crashbar. So you need to cut it (which is not safe) or install some spacers between crashbar and frame.

@miniclubman99 6 ай бұрын

Hiya change Ur headlight to LED projector also?

@THPTuning 5 ай бұрын

The DRL is fitted with LED, the main light is factory xenon (which was - in the Netherlands - an option almost nobody choose)

@alisonfinekifolau8085 2 жыл бұрын

Hi there, just wondering where you got the intercoolers from?

@THPTuning 2 жыл бұрын

The Nissens intercooler from this movie was bought at Autodoc.

@alisonfinekifolau8085 2 жыл бұрын

@@THPTuning thanks heaps. Loving your work💯 I have a 1.6 308 thp engine aswell and am doing some research into what mods I can add to it. Keep up the great vids👍🏽 support from NZ!

@THPTuning 2 жыл бұрын

@@alisonfinekifolau8085 Thanks for your compliments, I really appreciate.👍🏻