10 EPIC Mechanisms to 3D Print First in (With Timelapses & ASMR)

Рет қаралды 93,059

Күн бұрын

Here are ten EPIC 3D Printed Mechanisms, with cool TimeLapses and ASMR. Also we’re announcing the winners of our last giveaway! Enjoy!
JLC3DP 3D Printing &CNC Service Starts at $0.3, Get $60 for New Users: jlc3dp.com/?from=Macro3DPrints
ALSO... We are giving away 1 item from this video FOR FREE. To enter, do the following 3 things:
1. Like this video
2. Subscribe
3. Comment what print you want!
The winner will be announced in the next video. We will reach out to you, then ship you your gift FOR FREE. Did we mention it’s FREE? Good luck!
Songs used:
“Undeniable” - Vibe Tracks
“Pray” by Anno Domini Beats
“Positive Fuse” by French Fuse
Thank you to all the makers out there who designed these cool mechanisms! Here's where to find the STL files!
1. V8 Engine by pfsmorigo: www.thingiverse.com/thing:395...
2. Gear Cube by emmett: www.thingiverse.com/thing:213...
3. Torsen Limited Slip Differential by pizzachef: www.thingiverse.com/thing:172...
4. Squeeze Fan V2 by GeorgeZSL: www.thingiverse.com/thing:490...
5. Liquid Piston by Integza: thangs.com/designer/integza/3...
6. Flying Helicopter by 3DBROOKLYN: www.thingiverse.com/thing:188...
7. Wind Up Boat by GreenDot: www.thingiverse.com/thing:355...
8. Gear Bearing by emmett: www.thingiverse.com/thing:53451
9. Vise by mdkendall: www.thingiverse.com/thing:270...
10. Helical Gear Kinetic Object by bohous: www.printables.com/model/4090...
What else should I print? Let me know in the comments!
Check out the printer I use! amzn.to/3Kh3pbD
Check out the filament that I use!
8-Color Bundle: amzn.to/3k9gV6i
Grey: amzn.to/3YMLbmO
Red, Blue, Green, Orange: amzn.to/3YIjCuL
Black: amzn.to/3YIjCuL
Silk Filament: amzn.to/41cVaDA
#3dprinting #gadgets #asmr #satisfying #timelapse #toys
#3dprinttimelapse #build #mechanisms #mechanical #giftideas #technology #tech #coolgadgets #instatech #device #gadget #engineering #engineer #toy
Top 10 mechanism ideas, EPIC Mechanism 3D Prints, Cool 3D Print Timelapse, Cool 3D prints, ASMR, 3D print ASMR, 3D Print Mechanical Engineering, Print tools, First things to 3D print in 2023, 3D Print Timelapse, 3D printing gift ideas, 3D print gift 2023, 3D print ideas 2023, Things to 3D print, #3dprinting, 3D print timelapse, 3D print, macro 3D print, cool 3D print timelapse, 3D prints 2023, useful 3D prints, cool 3D print ideas 2023, useful 3D print ideas, best 3D print timelapse, practical 3D print, satisfying 3D print, mesmerizing 3D print, Anycubic Mega i3 S, FDM printer, macro 3d prints
0:00 Introduction
0:06 V8 Engine (by pfsmorigo)
0:32 Gear Cube (by Emmett)
0:55 Torsen Limited Slip Differential by pizzachef:
1:30 Squeeze Fan V2 by GeorgeZSL:
2:24 Liquid Piston Engine (by Integza)
2:58 Flying Helicopter (by 3DBROOKLYN)
3:31 Wind Up Boat (by GreenDot)
4:14 Gear Bearing (by emmett)
4:35 WINNERS!!
4:55 Desktop Vise (by mdkendall)
5:23 Helical Gear Kinetic Object (by bohous)

Пікірлер: 94

@macro3dprints 4 ай бұрын

JLC3DP 3D Printing & CNC Service Starts at $0.3, Get $60 for New Users: jlc3dp.com/?from=Macro3DPrints

@aniruthn7675 Ай бұрын

How small did you make the v8

@81olsen Жыл бұрын

WHY!?!?!???!?!? why do you use a damn raft for every damn print??

@conorstewart2214 Жыл бұрын

You should really consider if you actually need a raft or supports.

@Integza12 Жыл бұрын

ᴄᴏɴɢʀᴀᴛᴜʟᴀᴛɪᴏɴꜱ ʏᴏᴜ ʜᴀᴠᴇ ʙᴇᴇɴ ꜱᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴛʜᴇ ʟᴜᴄᴋʏ ᴡɪɴɴᴇʀ ꜰᴏʀ the 🤶 ɢɪᴠᴇᴀᴡᴀʏ ᴘᴀᴄᴋᴀɢᴇ ʜɪᴛ ᴜᴘ✉️ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎁🎉❤

@macro3dprints Жыл бұрын

We are giving away 1 item from this video FOR FREE. To enter, do the following 3 things: 1. Like this video 2. Subscribe 3. Comment which print you want! The winner will be announced next month. We will reach out to you, then ship you your gift FOR FREE. Did we mention it’s FREE? Good luck!

@Integza12 Жыл бұрын

ᴄᴏɴɢʀᴀᴛᴜʟᴀᴛɪᴏɴꜱ ʏᴏᴜ ʜᴀᴠᴇ ʙᴇᴇɴ ꜱᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴛʜᴇ ʟᴜᴄᴋʏ ᴡɪɴɴᴇʀ ꜰᴏʀ the 🤶 ɢɪᴠᴇᴀᴡᴀʏ ᴘᴀᴄᴋᴀɢᴇ ʜɪᴛ ᴜᴘ✉️ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎁❤🎉

@Bnghwy55 Жыл бұрын

Im a 17 year mechanic lost my legs when i saw that differential i fell in love id like that one is perfect for my desk awesome stuff your doing here

@ranhuo6 Жыл бұрын

Love the video, will try a couple of them.

@ramsessilent Жыл бұрын

the wind mill thanks for the share Stay awesome!

@DB4KK Жыл бұрын

i would reccomend fixing your z wobble dude! get a shim, it really helps. also, that limited slip differential is awesome. my grandpa would love that. im low on filament now, but i would totally print that! I hope to win it!

@Emeraldpig52 11 ай бұрын

lol in the first 5 seconds i noticed that and was bouta comment

@IndianaGraphics Жыл бұрын

I am just creepin through. Getting a Bambu X1C in a few days. I like this video. I subbed 👍🏼❤️

@macro3dprints Жыл бұрын

That is awesome, I hear that’s a great printer. Have fun!!

@gideonbrandsma8590 Жыл бұрын

I would love the desk vice

@beau5972 Жыл бұрын

I really want the desk top organizer😁

@MrMagicOrJesterClown Жыл бұрын

i do like the gear cube, but i do like them all :)

@abram217 Жыл бұрын

Just got a new printer today, currently printing an owl. Nice print suggestions.

@Integza12 Жыл бұрын

ᴄᴏɴɢʀᴀᴛᴜʟᴀᴛɪᴏɴꜱ ʏᴏᴜ ʜᴀᴠᴇ ʙᴇᴇɴ ꜱᴇʟᴇᴄᴛᴇᴅ ᴀᴍᴏɴɢ ᴛʜᴇ ʟᴜᴄᴋʏ ᴡɪɴɴᴇʀ ꜰᴏʀ the 🤶 ɢɪᴠᴇᴀᴡᴀʏ ᴘᴀᴄᴋᴀɢᴇ ʜɪᴛ ᴜᴘ✉️ ᴛᴏ ᴄʟᴀɪᴍ ʏᴏᴜʀ ᴘʀɪᴢᴇ 🎁🎉

@macro3dprints Жыл бұрын

That’s awesome! Thank you! Happy 3D printing!

@roccocatalano3746 Жыл бұрын

Slip differential please looks so cool!!!!!!!!🙏🙏🙏🙏🙏

@themacgamer7396 Жыл бұрын

destop vice please

@grantclark4139 Жыл бұрын

Hey bro it looks like you have quite a bit of Z wobble. I was amazed with my printer how much of that went away when I lubricated the Z axis screws. Love the video, will sub!

@macro3dprints Жыл бұрын

Thank you for the feedback Grant! That’s a good idea, I wonder if that’s the source of the issue. I’ll have to give it a go! When I was installing the mechanical Timelapse rig, I think I may have displaced one side of the Z-rail ball screw linear actuators- maybe that is contributing too. I may have to re-level the nozzle as well Is the Z-wobble you’re taking about shown on the Yellow gear shaft for the Differential - each layer of circles aren’t really coincident?

@matsdijkstra670 Жыл бұрын

My printer has the same it is a ender 3 but I do not know how to fix it :(

@1islam1 Жыл бұрын

@@macro3dprints 🔴 What Is Islam? 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.

@Emeraldpig52 11 ай бұрын

@@macro3dprints also try tightening the gantry screws. i had the same problem and that helped alot

@jaydenramcumar5915 9 ай бұрын

.😢 can you show me a video how to build a Lego Moto

@berthaguman3894 Жыл бұрын

Hand held hand

@kalebgross3730 Жыл бұрын

Gear box please it's so cool to see how it works

@sodor_dan-da-man Жыл бұрын

I NEED THE DESKTOP VICE

@spensane Жыл бұрын

I like the flying helicopter.

@moisesyepez4854 Жыл бұрын

#3 torsen limited slip differential

@lucineiadeoliveira-jg1hs Жыл бұрын

Yeeees free

@youtubedrummer5603 Жыл бұрын

i was your 1k subscriber congrats on monitisation

@macro3dprints Жыл бұрын

Thank you so much!! I will never forget this :)

@dvd8974 Жыл бұрын

I am subscribed for your channel too

@Epicprintz Жыл бұрын

Would love to get the gear box I have been having a hard time printing it great video

@macro3dprints Жыл бұрын

Your submission to the contest is entered! I’m not sure exactly which one you’re talking about though, is it #2 green gear cube?

@Integza12 Жыл бұрын

@zalan11123 Жыл бұрын

I need the 3d printer😂😂🎉🎉🎉

@hugoribeiro8437 Жыл бұрын

Would love to win that flying helicopter to play with my daughter! 😍 Keep the good work =) 💪👍

@macro3dprints Жыл бұрын

Congratulations, you won!!! 🎉 🎉 Please email me at macro3dprints@gmail.com to claim your FREE prize!!

@BrickEngines 6 ай бұрын

you're not using the liquid piston as intended, it's functional not a display mechanism

@macro3dprints 5 ай бұрын

Oh shoot good point!!

@srlsigns7944 Жыл бұрын

Engine or differential please

@sylerlee7666 7 ай бұрын

it was good but he doesn't tell what website to find the prints on so i could not find them cant print them but they were good. bro good content

@macro3dprints 7 ай бұрын

Thank you! And check out the video description for all the links to the prints 😁

@andrewbelcher Жыл бұрын

Gear Bearing please

@Integza12 Жыл бұрын

@EilikHatesUTTP Ай бұрын

Can i have the diffrental (if your still giving out them?)

@macro3dprints Ай бұрын

Hey there! Sorry about that, but the giveaway ended and the winners were already announced :/ Best of luck in the next giveaway!!

@EilikHatesUTTP Ай бұрын

@@macro3dprints ok

@keithdesouza8859 5 ай бұрын

very creative. what design software us popular for creating gears?

@macro3dprints 4 ай бұрын

Thank you! But I didn’t design these, all three artist who did are credited In the description with links, go check them out! As for design software, check out FreeCAD! There are tools in there for making all kinds of gears

@purvislewies3118 16 күн бұрын

the printer please...love from Cape Town

@macro3dprints 16 күн бұрын

Haha way to think outside the box!!

@manguydude287 Жыл бұрын

it's too bad the spring in the boat didn't really work. that's a cool idea for sure though.

@macro3dprints Жыл бұрын

I know right. A little lubrication will definitely help with the gears! And printing with smaller layer height would too! I highly recommend trying it for yourself, it’s a very cool design! The link is in the description!

@dvd8974 Жыл бұрын

How can I get a Stl file on the V8 engine to print it mi self

@macro3dprints Жыл бұрын

Hello! Here is the link: V8 Engine by pfsmorigo: www.thingiverse.com/thing:3956483

@Solsticewinter. Жыл бұрын

I want the Torsen Limited Slip Differential by pizzachef:

@enesileicatyap1593 Жыл бұрын

Airplane pls

@astrix6436 Жыл бұрын

how do you get that adhesion?(first layer)

@macro3dprints Жыл бұрын

That’s a great question! I struggled with that for a while, until I started matching nozzle temperature to the material’s recommendation. Each material should specify a range of temperatures, like 180-200C is common. I found success setting the nozzle temperature to be halfway in between that range, i.e. 190C for that example. Other materials could specify hotter temperatures like 200-230C, in which case I would set it to 215C. Even a few degrees makes a big difference! And I set the bed temperature to 70C so the first layer really stays melted to the bed. I Hope this helps!

@astrix6436 Жыл бұрын

@@macro3dprints thanks but do you use faft as the adhesion or what?

@Jonyjack69 Жыл бұрын

@@astrix6436 Indeed he is using raft. That's the first layers you see on the video.

@astrix6436 Жыл бұрын

@@Jonyjack69 thank you for the help it helped so much

@FacetiousUnTech 5 ай бұрын

V8 engine for my bugatti 😅 andrew tate would happy to see new engine

@macro3dprints 4 ай бұрын

Hahaha I know right

@SirGorillaGT659 Жыл бұрын

desktop vise if it isn't to late😁

@macro3dprints Жыл бұрын

I am Sorry but the winner was already announced 😔

@macro3dprints Жыл бұрын

But there is always the next giveaway!! 😁

@jamessands1001 Жыл бұрын

Can I have the torsen differentia?l I have subscribed to your channel.

@i.segura9683 Жыл бұрын

Flying helicopter

@Omar-Hajamovich Жыл бұрын

Модели интересные, но качество печати не для видео :( И ретракты не настроены, пластик видимо сырой или не лучшего качества, воблинг, ... в общем можно увидеть большинство дефектов 3D печати, и как печатать нельзя :)

@manuram6887 Ай бұрын

Can you send me the stl file for v8engine

@macro3dprints Ай бұрын

Here you go! V8 Engine by pfsmorigo: www.thingiverse.com/thing:3956483

@aniruthn7675 Ай бұрын

How small did you the things

@aniruthn7675 Ай бұрын

That phone is olso my phone

@Anima_Lover835 Жыл бұрын

3d printer

@sammaelst7971 Жыл бұрын

why is all printed on a raft? ^^" and also fix your printer :D or print slower the plastic isn't even propperly melted since you see layerlines ^^"

@macro3dprints Жыл бұрын

Ahh batch printing the gears only worked with a raft. The first layer wouldn’t stick to the build plate, even at 65F. The raft was just a more reliable option, and the gears all just popped off nicely. And to avoid excessive stringing, I ended up turning the nozzle temp down to 195F and retracting 6mm before each image was taken for the Timelapse, so that could be the cause of the layerlines too