10 MILLION Mile Ford Mustang! NO WAY! Leaking Axle? Weird Complaints

Рет қаралды 1,273,023

Жыл бұрын

Check out my Merchandise (because I don't say MERCH) Store Below the video for Men's and Women's Apparel, MUGS and Stickers!
rainmanraysrepairs.myspreadsh...
Send support on Patreon, check out the bio: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage right now
Amazon List, must have for any toolbox!
ATD Tools 13782 10-Piece Triple Square Spline Bit Socket Set amzn.to/3RV2fUB
Same as Matco. Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
Mercedes BMW VW Wheel Stud Master Kit: amzn.to/3OszRaL
Bahco "Frustrated" Pliers AWESOME tool! amzn.to/3IfDeOa
Brake Caliper Compressor: amzn.to/3gQBuiB
GearWrench Hose Clamp Pliers: Currently Unavailable
My Camera Gear:
Gopro Hero 8 amzn.to/3mPnpFA
Gopro Hero 9 amzn.to/3EKDcM1
Hero 8 Dual Charger amzn.to/3EId84c
Flexible Camera Mount amzn.to/3Jywrk5
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Motor Repair

Пікірлер: 2 200

@patrickfarris549 Жыл бұрын

I’m calling it. This man is going to be the reason for a brake clean shortage.

@TonyLasagna Жыл бұрын

Ray’s got nothing on PTT w/Arod when it comes to brake clean.

@jimmylarge1148 Жыл бұрын

@@TonyLasagna or vice grip garage for that matter. They use is as wasp spray, cleaner, gas, and all types of other shit.

@dogsnmotorcycles Жыл бұрын

Brake clean is great stuff, but kinda too expensive to use as a pressure washer. Maybe not to expensive for Ray...

@noimagination99 Жыл бұрын

You're right, I got there first so now my local AutoZone is OUT!

@chriskline3763 Жыл бұрын

@@noimagination99 OUT to you, On hold for this man when he runs out. Lol

@tiredoldmechanic1791 Жыл бұрын

A google search for differential leak on a Ford Mustang turns up thousands of results mentioning a technical service bulletin to replace the vent with a vent hose kit. A good service writer should have caught that.

@obamaatemyson5297 Жыл бұрын

Most server writers have little experience or the experience they have is from working at a parts store. Whenever something technical comes up I get dragged over to the phone and have to explain

@kevinjohnson7330 Жыл бұрын

Yep. Leaking axle vents is an extremely common problem on this era of mustang.

@alanshelby5980 Жыл бұрын

that sounds like the write thing to do

@sheerwillsurvival2064 Жыл бұрын

Always check service recalls and bulletin 👍🏻

@Jerry-lj3cf Жыл бұрын

@Jeff Karpinski l would have done the same thing, and keep in mind that, I have been a master mechanic for over 32 years, so it's not the mechanic to blame for Ford and the cheap cost of the product, like a Mustang.

@joeblowe7545 Жыл бұрын

You honestly do single handedly keep the brake clean industry in business. Wow, just Wow....

@marshallmcdonald7309 Жыл бұрын

For fun & reference, it would take about 20 years of non-stop, constant 60 mph driving to reach 10 million milles. (1 mile a minute x 1,440 minutes in a day. Plus one day of driving every 4 years for leap year.)

@PBMS123 Жыл бұрын

Or driving at 174km/h (108mph) for the 11 years straight its existed to get to it.

@TehButterflyEffect Жыл бұрын

Yeah I came here to say that. That car has either been tampered with or the video is clickbait. Not possible for it to have that many miles on it.

@Chillin4030 Жыл бұрын

@@TehButterflyEffect or its just ford and their wonderful malfunctions

@o.j.z5285 Жыл бұрын

Yea I got 22 years at 70mph non stop

@iamyoung4eva21 Жыл бұрын

There’s not even a semi with 10 million miles on the clock. I call bullshit

@EricFixalot Жыл бұрын

I've found that stubborn grease/oil buildup comes off way easier when I soak it in WD40 for a few minutes while I do the repair, then I use brake clean on it. It's the difference between using 1/2 a can and 3 cans of brake clean.

@k-mc94 Жыл бұрын

Yeah if he soaked it and agitated with a brush it would save a lot of cans of brake cleaner per year 😅

@deborahgeorge3238 Жыл бұрын

Ray likes to use multiple cans regardless of the need.

@ferrumignis Жыл бұрын

100% agree, brake clean evaporates far too quickly to dissolve into thick grease so you are just using it like a firehose. WD40 or pretty much any penetrating oil will soften this up.

@Torsee Жыл бұрын

@@deborahgeorge3238 It’s fun!

@TheSourKraut Жыл бұрын

But: time is $$ and depending on the hourly shop rate (and the fraction of that going to Ray) AND the previously made statement that the shop pays for the atomic grease blasters, Rays way makes sense. Personally, I've managed to make one can last (many moons ago) for TWO rebuilds of 1960s era military "Jeeps" (MUTTS). BUT I'm cheap and my weekends were too...

@BubbasWorkshop Жыл бұрын

Now I know what the "shop supplies" fee is for! I can't wait to have the opportunity to try the brake clean pressure washer 👍

@4450krank Жыл бұрын

i just did it at work yesterday:D works very well:D

@blacknightgaming8987 Жыл бұрын

the CRC Heavy Duty Degreaser that foams cleaned the hell out my coil packs and top my engine from years of oil spillage and gummy crud (last owner must have had real shaky hands) plus it’s safe for plastics. Quick spritz of that then some carb/brake clean and it comes right off shiny

@Wixkdd Жыл бұрын

I couldn't imagine the brake clean high this dude got from all that brake clean, for me it took like 10 seconds of using brake clean before everything started spinning lmao

@gsp911 Жыл бұрын

It's impressive how clean that dif is after 10000000 miles.

@romankozlovskiy7899 Жыл бұрын

Never was 10 mil

@ieatiron Жыл бұрын

Thats ford quality for ya

@StevenBradley-sq6kg Жыл бұрын

I was going to say the same thing.

@moushunter Жыл бұрын

Back in the 70s when I worked at an Exxon station we had a handy dandy 15 gallon barrel of gear lube with a pneumatic pump and nozzle to fill differentials and manual trannies (can I say that here?) We never had to mess with gear lube bottles. Checking the diff was part of every oil change we did.

@Tiek-bl8ej Жыл бұрын

Call Guinness tell them Ray has broke record for highest amount of brake clean used on one vehicle!!

@jesses1589 Жыл бұрын

I wonder how much she was charged for "shop supplies" lol

@chriskline3763 Жыл бұрын

minor correction, Brake cleaner used on vehicle while not actually cleaning brakes.

@Phillv8 Жыл бұрын

That is gunna come back!

@TECHNOGEEK20000 Жыл бұрын

I dont know.....I gotta feeling that Eric O. from south main auto may be the keeper of that record lol. Anyone who has seen his channel knows he is a hard core brake clean user!

@chrisschultz6541 Жыл бұрын

Sure shot refillable canister should be in all shops.

@blackjesus8177 Жыл бұрын

Good to see a mechanic who isn’t trying to rip people off I really care about the work they do

@wwjoshdew Жыл бұрын

2:57 "it's for my channel only". haha. that cracked me up. Love you dude.

@edzimdahl1158 Жыл бұрын

Sometimes watching yours & others repair and shop videos am amazed at the amounts of brakeklean and carbklean used, guess I'm just old fashioned,, scrape, wirebrush, and then the kleaner of a shop towel or rag

@johnnysouza5601 Жыл бұрын

A friend had this issue and I guess it's a common issue on 2011-2013 mustangs. The vent needs to be replaced.

@Dirtyharry70585 Жыл бұрын

Bet invent stuck open

@madmaximilian5783 Жыл бұрын

@@Dirtyharry70585 yep it looked like after Ray sprayed around the vent it was moving freely.

@myZcarlife Жыл бұрын

I think the dealer fixed that on my 2012 many years ago when my wife took it in for other service.

@babagandu Жыл бұрын

Great Mexico

@charlescurran1289 Жыл бұрын

A friend’s 2012 needed a new diff shortly after it was bought used with 36k miles. Fixed under warranty but I bet this was the problem with his too.

@waynep343 Жыл бұрын

My 96 ford e250 went to 399.999 and rolled to 300,000. It's done that twice. So it has 530,000 miles on the 300 6 short block. 2 plastic cam sprockets. Done in engine. Not an easy job. A head at 350k. 5 radiators . Water pumps and fan clutches.

@FenrirTwitch Жыл бұрын

Ray is BIG BRAINING didnt even think about that 14:48

@KTDeath0 Жыл бұрын

Its soo nice to randomly hear "Bad apple" in the background 4:10

@invisabrows5145 Жыл бұрын

I thought I was imagining it lmfao

@CraigFTP Жыл бұрын

That drive by doodeedoo was awesome.

@IIGrayfoxII Жыл бұрын

Those $1 laundry scrub brushes work wonders for getting rid of caked on grease. Bit of degreaser or brake clean a quick scrub, then a blast with degreaser or brake clean again to rinse the crap off and it comes up looking like new. Might be faster than finding shop air and using 3 cans of brake clean.

@jameslong3595 Жыл бұрын

Ya nothen like giving the car a nice coat of brake clean and grease. Some brake clean and a rag would of cleaned it in two wipes

@KirbyJ89 Жыл бұрын

I dunno man that brake clean air gun looked kinda fun if ya ask me… sometimes ya just gotta live a little 🤷🏼‍♂️😂

@jordanmercier3616 Жыл бұрын

@@KirbyJ89 lol someone should make an attachment for shop air guns so you can mount a can on them like a paint sprayer.

@Sva_rog Жыл бұрын

I like using engine shampoo and a tire lube brush to really get it in there, I then hit it with a pressure washer and everything comes right off. I know a lot of shops don't have that on hand but it's cool to see how we all do different things to achieve the same result

@jacobosgood3513 Жыл бұрын

Lolol, but then you're 2/3 of the way to a flamethrower.

@capesquirt Жыл бұрын

For adding the diff fluid, I have always used a suction gun. Pull back the plunger,unscrew cap,pour in required fluid, reinstall cap,insert hose,push plunger forward,fill the pumpkin or whatever. Sometimes you might have to make a step down to the hose to fit the orfice. A quality chef style turkey baster often works well also.

@rodneyjohnson4794 Жыл бұрын

'quality chef style turkey baster' a certified ase (or whatever) stainless steel baster.

@michaellawrence6677 Жыл бұрын

I know from my experience with trucks that when a vent cap gets plugged the diff will spray out fluid due to the pressure from the heating of the rear, clean up the plug and change the oil. You cleaned the rear end up too. You’re my hero.🤣 As always, you’re great. Thanks from the North.

@EmbraceTheSuck Жыл бұрын

Ray your “money shot” to the face made me remember when I was in the Army and we had to take oil samples. One of my squad members crawled under a running 30t crane to get a sample only to have the sampling valve crack and cover him from head to belt buckle in diesel oil.

@nelsblair2667 Жыл бұрын

A true grease monkey? An oil miner? 63C?

@clickprovider8505 Жыл бұрын

Bet that was warm

@alexd4171 Жыл бұрын

@@clickprovider8505 warm? I would be surprised if he didn't have like 3rd degree burns

@123andme Жыл бұрын

Oh crap... Funny if he's ok.

@EmbraceTheSuck Жыл бұрын

@@alexd4171 it actually wasn’t running long enough to burn him.

@jw-hy5nq Жыл бұрын

Those wobbly vents work ok but require cleaning. The axle seal probably started leaking because the vent was clogged and when the axle got hot the pressure had to go somewhere. With the new axle seal it went somewhere else, I am surprised it wasn't out the other side seal. When anything is done to the axle the vent should be checked (make sure it wiggles) and clean it to ensure it wiggles.

@paulmartin2499 Жыл бұрын

Clogged with Ground Metal Shavings, no less!

@jacksmith2315 Жыл бұрын

These are known for having bad vents. Should have been replaced. Theres a service bulletin for it. Second time this cars been in for the same problem. Should have searched to see if its a common issue and would have seen the service bulletin. She will be back even more pissed when ot happens a 3rd time

@gearbender427 Жыл бұрын

As a 37 year mechanic, I have to say it's very relaxing to watch someone else doing the work! LOL. But I am surprised you didn't actually remove the vent to blow through it and make sure it is not plugged.

@Peter-wo4uo Жыл бұрын

eh, if its plugged it aint leaking, right?

@RRaucina Жыл бұрын

@@Peter-wo4uo If plugged, can be forced out through the seals and joints as he noted.

@level1804 Жыл бұрын

Do we miss the DO-DEE-DO-DEE-DO? A little bit, but going from a bay technician to a business owner and watching this journey, has made Ray one of my go-to channels on KZfaq. Love the enthusiasm and focus on his work, and all the fun/stupid stuff too.😅 The epitome of “don’t let the bastards grind you down”.

@TrondBrgeKrokli Жыл бұрын

Man, the way you manage to be creative in talking to yourself (and us viewers) while working is exemplary. Wish I had the creativity to do something like that, because I mostly grumble some unfinished sentences to myself when there's nobody around (being the only IT person in a company kinda sucks when it comes to not having a like-minded colleague to talk to). Oh well, I guess I will have to hang in there, knowing that when I get home I get to watch more funny stuff from Ray and his workplace. Thank you for keeping up the positivity, it really helps in the long run.

@oscarjones5773 Жыл бұрын

Apply thread sealant to vent plug. Tighten vent plug, add hose, secure suspended above axle assembly. Possibly add small breather filter/fuel filter.

@jerrykinnin7941 Жыл бұрын

That's a great idea. Old school mud running 4x4 style.

@braveheart5280 Жыл бұрын

RIGHT ON- 4x4 SHOULD HAVE LONG VENT HOSE .

@davidclemens1578 Жыл бұрын

If you noticed he had removed a cap on the vent and cleaned it because it was plugged with oily dirt a car like that is not expected to be used off-road so it really isn't necessary to have a long hose. It could be just the climate where the car is used because as you know in warmer climate oil will expand a lot more and as he said if you're basically hot rodding it it's going to heat up faster and expand. In that case a taller vent would be sufficient.

@Righteous_Judas Жыл бұрын

I’ve only seen 3 of your videos but I’ve noticed two things. Cars like giving you the money shot, and when life gives you lemons, spray ‘em with brake cleaner!

@German_1 Жыл бұрын

I like watching your channel. you obviously know what you're doing, but mostly because you're funny with your sound effects and your cheerful attitude. keep it up!

@evergreenthuja5275 Жыл бұрын

💥 I'm Here Seeking Turbo Shots Of Brake Clean Spray . . . . . 13:07 . . . . . And I Was Richly Rewarded ! 🏆 Yessss ! ✊

@miltonodom8576 Жыл бұрын

You make mechanic work a joy to watch. You really investigate to repair a vehicle instead of replace parts. A well deserved attaboy.

@Bamfhammer Жыл бұрын

he missed one of the thousand of articles about a TSB related to that air bleed valve and replacing it with a different set of parts. Could have saved a bunch of gear oil and time.

@danlford Жыл бұрын

Yeah so what exactly did he investigate? He dumped perfectly good gear oil just to replace it with more. Didn't even address the real issue. Just cleaned the axle.

@BigManko Жыл бұрын

I just love that "Bad Apple" is playing in the background.

@davetopp105 Жыл бұрын

Older axles back in the day had problems with oil coming out the vent. A fitting installed where the vent went to attach a hose (trans cooler hose works well) with the vent attached at the end of the hose works well. Just have to raise it up a bit and secure it. Also, make sure the correct gear oil is installed. :D

@donaldderrick3639 Жыл бұрын

I had the same issue and also thought a bad weld could contribute to the leak. Checked the fluid level and added 1 0z of oil dye, drove and found it was the check ball in the vent cap. No more worries about the axle tube.

@rjcolombe Жыл бұрын

Interesting. Was never aware of "oil dye" before.

@comporangegt Жыл бұрын

I remember these having vent issues from my dealership days. There is a TSB which calls for replacing the vent if it’s a bad leak.

@eeassa Жыл бұрын

$120 for the rear differential service and $75 for brake cleaner.

@FloraBox Жыл бұрын

I have a lovely part number that’ll help you out tremendously on filling with bottles. W1139 I picked up one at O’Reillys and I love it.

@pekkasaukkonen5339 Жыл бұрын

Ray you are the champion brake cleaner squirter and we all love that .Keep up the funny and informatic work and greetings from Finland to you

@JasonJohnson-yu8zf Жыл бұрын

10 million miles is 909 thousand a year, or 103 miles an hour all day every day, that's got to be a glitch in the matrix

@mandc20022 Жыл бұрын

Or it might be a matrix in the glitch

@jacobcutrer Жыл бұрын

Or the matrix is the glitch

@devinmoyer7466 Жыл бұрын

@@jacobcutrer or the matrix is the glitch

@rustypotatos Жыл бұрын

Na man that’s obviously not very hard to do… Scotty Kilmer never made a video about what you are saying so I don’t know

@60odeeman Жыл бұрын

Well done! These types of practical videos are much appreciated. Your excellent narration along with Jolenes outstanding camera technique makes your videos worth watching.

@beardednomadvanlife6363 Жыл бұрын

Love your comedy whilst doing your job Wish I had a mechanic like you in my area

@gerardtrigo380 Жыл бұрын

Us old school guys would have lifted the car first, cleaned it real well and then test drove it. That would better reveal the leak and problems like leaks at the tube/differential joint or cracks in the tube, One time I found the crude was holding a broken vent in place. Just an FYI, for future reference. One more question. Where is the vent hose? Back in my day there was a hose going from the vent tube up to keep water out when going through puddles.

@joepeanut6827 Жыл бұрын

Absolutely the best way, save from having to do it twice.

@TheFallenAngel13524 Жыл бұрын

Pretty sure they dont put them on rwd cars because they're not meant to be in deep water and if you are in deep enough water to get water into the vent well your interior is going to be flooded.

@johnt.848 Жыл бұрын

I've worked on plenty of old cars that don't have a hose on the vent. It is designed to be one way to relieve vapour build up and not allow anything in. It's the build up of crud that prevents them closing so oil vapour leaks out.

@edzimdahl1158 Жыл бұрын

It's been my experience that cars just get the cap style and the hose goes on 4x4 trucks, jeeps, and anything that can be considered to be used off-road

@gerardtrigo380 Жыл бұрын

@@TheFallenAngel13524 so water gets inside. We saw that all the time. Unless it got deep enough to get in the dash it was no problem. Take out the seats and carpet, clean them and let them dry, throw out the batting and replace it. Reinstall the cleaned and dried seats and carpet and you are ready to go.

@gotdangedcommiesitellyahwa6298 Жыл бұрын

This episode gave me flashbacks to those old school cartoons. "The word of the day is, 'Conjunction'." "Conjunction, junction, what's your function?" "Spraying off the gear oil that's leakin' through the vent!"

@Walczyk Жыл бұрын

Wow that is a museum piece!! It looks great for 10000k miles!

@unapologeticallypatriotic3853 Жыл бұрын

Have you ever read the back of the tube of rtv sealant? You just supposed to finger tighten, let it set for 30 or 45 mins and then tightening ensues

@LA_Commander Жыл бұрын

Having done many diff services on Ford 8.8's, I can for sure tell you they have real gaskets for that diff cover! 🙂

@DevJB Жыл бұрын

Yes, put paper gasket on them, so I can fix more ; ) Hehe.

@norontboyz5949 Жыл бұрын

Respect ray for the amount of time and quality vids. He's working 2 jobs to provide us some entertainment!. Thanks ray!

@norontboyz5949 Жыл бұрын

@Marty's 4x4 mechanic and KZfaqr

@watchingdanny Жыл бұрын

Ending with a nice and shiny rear end. Love it. Great job as always.

@timhogan745 Жыл бұрын

I've finally seen someone who uses more brake cleaner than me!!!! Bravo my man!!!

@MagoLP Жыл бұрын

10,424,904 miles is almost exactly 2^24 km (just about 25 miles over). So this could be a single bit that got flipped due to cosmic radiation, which happens from time to time. But where did the 95000 miles go? Maybe the memory got corrupted/wiped? Or an error during data transfer to the scan tool.

@SickMy_Duck Жыл бұрын

If it’s 10 million miles, ford should give this guy a latest gt500 as reward like the guy with f150 over the odometer limit iirc?

@jonasstahl9826 Жыл бұрын

Seems to be a logical explanation. The reason that it has 10mio miles and shows 95.000 could be that usely multiple computers inside the car counting miles. The cockpit computer shows the correct 95k and the engine computer he is checking has the flipped bit and shows 10 mio. The 25miles of could be the case that the engine got tested on a dyno in the factory for normal quality control.

@MagoLP Жыл бұрын

@@jonasstahl9826 I still don't understand why the 95,000 miles are missing, though. Did it not count them for some reason? Maybe it was defective and stopped at 25 miles, then the bit flip occurred at some point in the past 11 years. Very strange.

@joemrkvicka3393 Жыл бұрын

Something is obviously wrong. An in service date of 1/1/2011 through today is 4229 days, which would mean the car has been driven 2465 miles per day. Even converting 10M km to miles would result in 1532 miles per day. A single decimal place shift of 153 miles per day is 55k miles per year.

@williamgilroy5217 Жыл бұрын

@@joemrkvicka3393 Thanks for doing the math. I was going to do it out of shear boredom on a Monday at work. I thought I would check "Comments" first. That's alot of friggn driving. And on Mustangs tiny gas tank, that's alot of exercise.

@lucluc2716 Жыл бұрын

Probably the most brake clean action we've seen here so far. 🤣🤣

@badassbiker1974 Жыл бұрын

Been a long wait, but aaaaaaahhh! Go Ray!

@haroldsnipes5539 Жыл бұрын

I enjoy your program not sure which park I enjoy more the trouble and repair skills or the comments ! I find both enjoyable. Thanks for making them!

@frozenhouse5362 Жыл бұрын

Sorry to hear your house move is to be delayed,

@foxisretrofitting4556 Жыл бұрын

I knew I heard Bad Apple in the background. I used to listen to that every morning on the way to work back when I worked at a terrible tire shop for a while.

@charlesbraun9636 Жыл бұрын

Hey Ray Its good to see a mechanic that goes the extra mile even if it takes a little longer. I know when i was done I got a good nights sleep. Keep up the honest work. You are a man with integrity

@keithrimmer3 Жыл бұрын

Ray the vent needs changing bud and a vent pipe fitting

@wjye Жыл бұрын

I love that Valvoline stuff in the bags. So easy to use.

@549BR Жыл бұрын

Very nice work Mr. Rainman.

@mattfarahsmillionmilelexus Жыл бұрын

The old Fords from the '60s through the '80s had a rubber hose on the vent nipple, typically going up into a hole in the frame rail with a clip to keep it there. I'm sure that would take care of the problem.

@jacksmith2315 Жыл бұрын

@Marty's 4x4 theres a service bulletin for these vents failing. Second time in for the samething should have been looked into and would have seen its a common problem w a TSB/technical service bulletin. Shes guna be pissed when she comes back a 3rd time for the samething. Hopefully someones smart enough to look into next time

@mymusicaccount1456 Жыл бұрын

I'm getting excited, when Ray talks about diff covers, I just know there will be LOTS AND LOTS of brake cleaner involved! Anticipation.......

@badassbiker1974 Жыл бұрын

Oh yes, you know its gonna be good when the diff cover comes off. Money shot!

@mymusicaccount1456 Жыл бұрын

@@badassbiker1974 better than expected! Double house down of the rear end, multiple angles!

@badassbiker1974 Жыл бұрын

@@mymusicaccount1456 yeah trigger can and the air line too!

@joshuamoore24_7 Жыл бұрын

I used the Permatex Right Stuff 90 minute gasket maker on my transmission pan gasket during a filter replacement and drain and fill. I put the Permatex Right Stuff 90 minute gasket maker on the pan side only after cleaning the pan. Waited 1 hour to torque it to spec and another 90 minutes to 2 hours after that. The transmission has not leaked a drop and it's been 6 months so far so good!

@annalarson4785 Жыл бұрын

I love the do-da-do as you're pulling the car in lol

@18888888888888888886 Жыл бұрын

there is a tsb issued way back on the 2011 regarding the vent issue and vents burnt by the exhaust on the v8s there is a new design vent that came out to solve this issue

@Cdub541 Жыл бұрын

Wasn’t a V8

@18888888888888888886 Жыл бұрын

@@Cdub541 i know it wasn't but there is a new breather by ford to solve the leaking issue its just an extended breather though

@greyjay9202 Жыл бұрын

After using silicone gasket maker, cure times have to be observed. Uncured silicone will leak. I'm surprised that your shop doesn't have a bulk dispenser for gear oil. Is the vent removable? If so, unscrew it, clean it out, and then reinstall. When refilling, allow time for the gear oil to settle in the pumpkin. Check level again, with your finger.

@dragrace4fun Жыл бұрын

Yeah, that axle vent gets nasty; had to clean mine out awhile back for leaking, too. Later got replaced (repair shop somehow damaged the cap when putting a new gear set in). Hard use will net some overflow as well in time. The 70w90 is the stuff and if using one for competition (drag or heavy spirited driving, for example) I recommend a girdled cover. Ford put 75w140 in it originally...for some reason, so I burnt up some axle bearings PLUS a hard bit on the strip ate chunks out of the carrier bearings along with destroying the stupid 2-pc driveshaft. Now have a solid 1-pc steel shaft, custom-made for the car by a buddy that makes HD off-road ones, new everything, and all is well! The 8.8 is tough and versatile, but maintenance is key. Also, if the vehicle sits too long, expect seepage from the axle/pinion seals...along with a LITTLE from driving it; nature of the beast with how the seals work. Great video, thanks!

@JohnSmith-jo9ee Жыл бұрын

I love your sense of humor 🙂.

@ronaldsinclair6837 Жыл бұрын

Think you could have removed the vent, cleaned and inspected.

@willsrestorations Жыл бұрын

Of course not why would he go in and check out the source of the problem instead of grabbing the customers money and redoing something that was recently done. TSB on that vehicle for that issue was to replace the vent with an upgraded part from Ford and if needed a vent hose attached to it

@francis55 Жыл бұрын

@@willsrestorations Not a ford dealer or a specialty shop. Its all makes and you're going to miss some things. The lady should have just fixed it herself and spent the money on tools to do that job. If you want something done right you gotta do it yourself right?

@willsrestorations Жыл бұрын

@@francis55 this is why I've never let anyone touch my cars and I do all my own work

@lmCIoudz Жыл бұрын

@@willsrestorations You're annoying

@jacksmith2315 Жыл бұрын

@@willsrestorations because its a common problem on these and theres a TSB and this is the second time shes came in for this problem. Should have looked into it. Quick search would show its a common problem and theres a service bulletin for it

@frankbiz Жыл бұрын

I think Ray has stock in the brake cleaner companies, first time I saw him with two cans at once.

@minnesotaman3 Жыл бұрын

He's done it before, a true menace with those cans

@diglett_dude9879 Жыл бұрын

@@minnesotaman3 yes he does have a tendency to dual wield

@Big13Joe Жыл бұрын

SO satisfying seeing the clean pumpkin cover……..👍🏽

@raabtim Жыл бұрын

you've gone back to the "i'll try better next time" line on the last few closeouts, but personally I love the "I don't care that's your problem not mine" version

@t-bear1863 Жыл бұрын

There's supposed to be a hose from the axle to the body that stops it from doing exactly what it is.

@PRO4XKEV Жыл бұрын

Trucks, SUV 4x4 and 4x2 only.

@jwray9799 Жыл бұрын

fords are notorious for leaks when the vent is in the axle tube instead of the TOP OF THE DIF!! hard driving or parking in a angle/slope will cause the oil to run to that tube/ fill it, and then come out the overflow vent. Ask customer if they park the car on a slope/ angle. Also the FORD vent likes to fail, the check ball likes to stick open...

@rafranks1410 Жыл бұрын

Half a V8? Priceless!

@Kyle-bb9zp Жыл бұрын

I love this land line phone music it's one of a kind.

@tubeDude48 Жыл бұрын

That oil in the rear-end looked fine to me. Efforts to the right side should have been the proper repair.

@markholub97 Жыл бұрын

I would just replace the vent. They’re pretty cheap and will last that much long. Plus if it comes back, you’ll know it’s not the issue.

@jirachi48 Жыл бұрын

Literally just commenting for this; At approx 3:39 someone is playing “Bad Apple” one of the most well known Touhou series songs (For those who don’t know) thanks to whoever it was for bringing out my inner nerd.

@tyrantrex734 Жыл бұрын

Finally, someone who loves brake cleaner as much as I do!

@wesleypulkka7447 Жыл бұрын

Ray, I wonder why that vent wasn't attached to a hose that would let out the air but if routed correctly wouldn't leak oil?

@billchessell8213 Жыл бұрын

Question: of all your 1/4 inch power ratchets which do you find you use the most?

@Cnupoc Жыл бұрын

I don't even have a driving license but i'm watching this with my morning coffee. Even left a like 🤣

@classicgamer4451 Жыл бұрын

Ray loving the Daul brake cleaning also I think there should be a word of the day every because its funny 👍

@Grendelbc Жыл бұрын

Hehe. Do you guys buy brake clean by the pallet load? I thought the oil coming out looked awfully thin for gear oil but the new stuff seemed the same. Wouldn't it have been prudent to change the vent?

@module79l28 Жыл бұрын

SLATS = Self-Lubricating Axle Tube System. Judging by the petrified state of that diff's exterior, it sure needs it.

@RuralTowner Жыл бұрын

In other parts of the country it could be call an RBUDS (Ar-Buds) Rust Belt Undercarriage Defense System. Though this is usually only useful when it's the engine leaking oil.

@jessepickar3297 Жыл бұрын

You watch CSW too? 😂

@module79l28 Жыл бұрын

@@jessepickar3297 - Yep! 😀

@25enyce Жыл бұрын

Used enough brake clean for several brake jobs. Nice video!

@jefflittle4013 Жыл бұрын

I have seen a few videos on replacing diff fluid. All put the sealant on the cover then talked about being careful not disturb the bead as you maneuver it into position. Why would you not apply the sealant to the diff?

@notherestillnothing Жыл бұрын

Its impossible for there to be even a 1million mile mustang given the rising number of Jersey barriers currently in use.

@landongere7091 Жыл бұрын

Easy on the brake cleaner there, Ray! All the fumes coming from that stuff may cause you to hear a whole lot more doodley- doos than we doo. You know, spinny head stuff. Kind of like inhaling too much raw gasoline. 😅😅 P.S. Ever heard of something called purple power? Great degreaser. Great video!!

@silversurf6159 Жыл бұрын

Sadly, as well as the fumes giving the head a few too many beers feeling now, they can, after years of breathing them and absorbing through skin lead to you hearing a surgeon say " I'm sorry to say, I've got some bad news for you. "😱 Not a nice thing for you or love ones to hear. 🤷‍♀

@johndilloway9762 Жыл бұрын

I can smell it here in the UK🤣

@sluvage9187 Жыл бұрын

I love the background music in your shop 😂

@robertmedina6875 Жыл бұрын

That's cool! I never seen anything like that. Millions of miles

@LightChaosman Жыл бұрын

For the reading of 10,424,904 miles on the odometer: this looks like the maximal integer value for a 24 bit number, if we assume the scan tool internally works with kilometers instead of miles. When we use the following conversion factor for miles -> km :1.60934, we get the following. (2^24-1)/1.60934 = 10,424,903.997 A mere 0.003 miles off what the scantool says. Seems too close to be a coincidence. (Mind you, this is not the most exact conversion factor, the actual one is 1.609344, so I truncated the final 4) Why the scantool -- or the car's internal computer -- works with a 24 bit unsigned integer in this millennium is a mystery to me. Perhaps someone else can fill that bit of the mystery in.

@shawnnewlan7486 Жыл бұрын

Uhhh yea what he/she said.....

@BixbyConsequence Жыл бұрын

Good catch. You think it could be related to the single stall event?

@LightChaosman Жыл бұрын

@@BixbyConsequence I don't think so, no. The car itself seems to know its mileage well; 95k miles. So I would guess either a bug in the scantool, or some kind of problem in the data transfer from the car to the tool. Perhaps the tool is reading out the wrong memory address or something, which is all 1's. But that's pure speculation.

@robertpeters9438 Жыл бұрын

Maybe they ran it in reverse and it rolled over...to negative milage, ha ha.

@KunoMochi Жыл бұрын

A previous comment pointed out a possible bit flip due to cosmic radiation. It happens on very rare occasions, and also one of the reasons why servers that run 24/7 use error-correcting (ECC) RAM to account for the bit flip (among other reasons). As a real world occurrence, this happened during a town election in Europe when a bit flip caused one of the candidates to have obscenely more electronic votes than the town population. A hint was that the vote count was also almost exactly a base 2 number.

@robpeabo509 Жыл бұрын

Maybe the axel vent was blocked enough for pressure to build up in the axles when the oil heated but not fully blocked. Eventually enough pressure builds up on each trip that the oil was forced out the mostly blocked axel vent and not past the axel seals?

@Dis-Emboweled Жыл бұрын

Rollin' in on Dooo-dee Dooos was awesome!

@glenwhatley4125 Жыл бұрын

Gotta love how every object has its own specific gravity😊

@MeakerSE Жыл бұрын

I wonder if it's got stop/start and it's turning off and they think it has stalled.

@yeahitskimmel Жыл бұрын

Lol def not on a 2011 Mustang v6

@bikeman1x11 Жыл бұрын

not in2011 that was before the nanny state nonsense started

@dampierstucco5778 Жыл бұрын

More cleaning than fixing for sure. Something must be up with that vent on the axel.

@geofjones9 Жыл бұрын

My brother drove a 1 ton Chevy step van Denver to Wisconsin, freeway all the way. He was stopping to add rear end grease every 100 miles or so. We talked later about it, said the grease was coming out the vent fitting. I had a "wild blue yonder" flash. That truck had never been driven that fast for any distance, so this never came up. I said that MAYBE the step van body created weird air currents and there might actually be a low pressure area right there. I suggested he put a piece of fuel line over the vent and clamp it up high on the underbody. No more problems!

@ericcsuf Жыл бұрын

Good for another 10-million miles!

@Delorean_Guy Жыл бұрын

Just wondering what you fixed? You just replaced the diff fluid but didn't do anything about the vent valve it was supposedly leaking from

@donutwithsprinklez Жыл бұрын

'Murica

@smokeskull Жыл бұрын

You should have added a vent line and brought it up well above the diff. When I worked at GM we used to add a fuel filter on the end of said line on stubborn vehicles that leaked from the remote hose.